2022 JEEP WRANGLER

Driving at highway speed (65-70mph) on curve with slight road surface deviation experienced the infamous "Death Wobble". Slowed to 45-50 mph before vehicle steering returned to normal. The steering dampener was previously replaced to fix the first time this happened. Apparently this is not a fox.

Driving at highway speed (65-70mph) on curve with slight road surface deviation experienced the infamous "Death Wobble". Slowed to 45-50 mph before vehicle steering returned to normal. The steering dampener was previously replaced to fix the first time this happened. Apparently this is not a fox.

There is a class action lawsuit for 2021-2023 Jeeps where the power steering catches fire. That happened to us.

There is a class action lawsuit for 2021-2023 Jeeps where the power steering catches fire. That happened to us.

I am filing this complaint regarding serious safety and consumer protection concerns involving my 2022 Jeep Wrangler (VIN: [XXX] ), manufactured by Stellantis, as well as issues involving the towing company E&R Towing following my accident. Prior to my accident on November 8, 2025, my vehicle experienced multiple ongoing mechanical issues, including overheating, shaking while driving, and abnormal loud noises. These issues raised serious safety concerns and were not properly resolved. On November 8, 2025, I was involved in a rollover accident. Following the accident, Stellantis initiated an investigation and retained Bosch/Engineering Analysis Associates to extract Event Data Recorder (EDR) data from my vehicle. While presented as an independent inspection, this analysis was conducted by a vendor hired by Stellantis, raising concerns about the objectivity and scope of the findings. Stellantis ultimately denied responsibility, stating that the conditions of the crash did not meet the threshold for airbag deployment. However, this conclusion fails to address the ongoing mechanical and safety issues I experienced prior to the accident, including the possibility of system or sensor malfunction. Additionally, my claim for relief under Illinois Lemon Law was denied without fully considering the pattern of defects and safety concerns. I have also filed a complaint with the National Highway Traffic Safety Administration (NHTSA), Complaint #XXX, regarding safety concerns with this vehicle. Following the accident, my vehicle was handled by E&R Towing. I have concerns regarding how my vehicle was managed after the crash, including the handling process and lack of transparency regarding procedures and fees. I am requesting that this matter be reviewed for potential violations of Illinois consumer protection laws, including unfair or deceptive practices, failure to properly address known vehicle safety issues, and improper handling of my vehicle following acciden INFORMATION REDACTED PURSUANT TO THE FREEDOM OF INFORMATION ACT

I am filing this complaint regarding serious safety and consumer protection concerns involving my 2022 Jeep Wrangler (VIN: [XXX] ), manufactured by Stellantis, as well as issues involving the towing company E&R Towing following my accident. Prior to my accident on November 8, 2025, my vehicle experienced multiple ongoing mechanical issues, including overheating, shaking while driving, and abnormal loud noises. These issues raised serious safety concerns and were not properly resolved. On November 8, 2025, I was involved in a rollover accident. Following the accident, Stellantis initiated an investigation and retained Bosch/Engineering Analysis Associates to extract Event Data Recorder (EDR) data from my vehicle. While presented as an independent inspection, this analysis was conducted by a vendor hired by Stellantis, raising concerns about the objectivity and scope of the findings. Stellantis ultimately denied responsibility, stating that the conditions of the crash did not meet the threshold for airbag deployment. However, this conclusion fails to address the ongoing mechanical and safety issues I experienced prior to the accident, including the possibility of system or sensor malfunction. Additionally, my claim for relief under Illinois Lemon Law was denied without fully considering the pattern of defects and safety concerns. I have also filed a complaint with the National Highway Traffic Safety Administration (NHTSA), Complaint #XXX, regarding safety concerns with this vehicle. Following the accident, my vehicle was handled by E&R Towing. I have concerns regarding how my vehicle was managed after the crash, including the handling process and lack of transparency regarding procedures and fees. I am requesting that this matter be reviewed for potential violations of Illinois consumer protection laws, including unfair or deceptive practices, failure to properly address known vehicle safety issues, and improper handling of my vehicle following acciden INFORMATION REDACTED PURSUANT TO THE FREEDOM OF INFORMATION ACT

I am filing this complaint regarding serious safety and consumer protection concerns involving my 2022 Jeep Wrangler (VIN: [XXX] ), manufactured by Stellantis, as well as issues involving the towing company E&R Towing following my accident. Prior to my accident on November 8, 2025, my vehicle experienced multiple ongoing mechanical issues, including overheating, shaking while driving, and abnormal loud noises. These issues raised serious safety concerns and were not properly resolved. On November 8, 2025, I was involved in a rollover accident. Following the accident, Stellantis initiated an investigation and retained Bosch/Engineering Analysis Associates to extract Event Data Recorder (EDR) data from my vehicle. While presented as an independent inspection, this analysis was conducted by a vendor hired by Stellantis, raising concerns about the objectivity and scope of the findings. Stellantis ultimately denied responsibility, stating that the conditions of the crash did not meet the threshold for airbag deployment. However, this conclusion fails to address the ongoing mechanical and safety issues I experienced prior to the accident, including the possibility of system or sensor malfunction. Additionally, my claim for relief under Illinois Lemon Law was denied without fully considering the pattern of defects and safety concerns. I have also filed a complaint with the National Highway Traffic Safety Administration (NHTSA), Complaint #XXX, regarding safety concerns with this vehicle. Following the accident, my vehicle was handled by E&R Towing. I have concerns regarding how my vehicle was managed after the crash, including the handling process and lack of transparency regarding procedures and fees. I am requesting that this matter be reviewed for potential violations of Illinois consumer protection laws, including unfair or deceptive practices, failure to properly address known vehicle safety issues, and improper handling of my vehicle following acciden INFORMATION REDACTED PURSUANT TO THE FREEDOM OF INFORMATION ACT

The issues lies in the Hybrid systems electric only function. When climbing grades, the vehicle experiences severe power loss which can be felt by the driver and is displayed by the vehicle on the dashboard information cluster. Power output from the hybrid system drops to or below 50% output even when pressing the accelerator to maximum. This issue occurs almost every time climbing a steep grade regardless of exterior temps. After losing speed and power on a steep grade while working the accelerator to or near maximum application the engine is activated abruptly without warning and without the proper hybrid warm up sequence and causes startling shifting by the powertrain and jerks the vehicle. This behavior began after Recall 68C was performed and hybrid Battery replacement.

The issues lies in the Hybrid systems electric only function. When climbing grades, the vehicle experiences severe power loss which can be felt by the driver and is displayed by the vehicle on the dashboard information cluster. Power output from the hybrid system drops to or below 50% output even when pressing the accelerator to maximum. This issue occurs almost every time climbing a steep grade regardless of exterior temps. After losing speed and power on a steep grade while working the accelerator to or near maximum application the engine is activated abruptly without warning and without the proper hybrid warm up sequence and causes startling shifting by the powertrain and jerks the vehicle. This behavior began after Recall 68C was performed and hybrid Battery replacement.

The issues lies in the Hybrid systems electric only function. When climbing grades, the vehicle experiences severe power loss which can be felt by the driver and is displayed by the vehicle on the dashboard information cluster. Power output from the hybrid system drops to or below 50% output even when pressing the accelerator to maximum. This issue occurs almost every time climbing a steep grade regardless of exterior temps. After losing speed and power on a steep grade while working the accelerator to or near maximum application the engine is activated abruptly without warning and without the proper hybrid warm up sequence and causes startling shifting by the powertrain and jerks the vehicle. This behavior began after Recall 68C was performed and hybrid Battery replacement.

The contact owns a 2022 Jeep Wrangler. The contact while driving at 70 MPH, the vehicle experienced the death wobble. No warning light was illuminated. A dealer was contacted. The contact pulled over twice and drove 65 MPH on the way to the residence. The vehicle was taken to the dealer where it was diagnosed that the steering damper and tie rod needed to be replaced. The steering damper and tie rod were replaced, and the vehicle was repaired. However, the failure reoccurred several times. The manufacturer was not notified of the failure. The failure mileage was 28,998.

My 2022 Jeep Wrangler has an ongoing issue involving an oil and diesel leak, which creates a hazardous driving condition and poses a fire and safety risk. The vehicle has been taken in for repair multiple times (4 repair attempts) for the same issue, and the problem remains unresolved. Due to the severity of the leak, the vehicle is unsafe to operate and requires towing to the dealership. Despite repeated repair attempts, the manufacturer has failed to provide a permanent fix and has denied further assistance based on procedural reasons (vehicle not currently at dealership, mileage, and warranty concerns). I am concerned this is a broader safety defect that could affect other vehicles.

The contact owns a 2022 Jeep Wrangler. The contact stated that approximately one month prior to receiving notification of NHTSA Campaign Number: 25V741000 (ELECTRICAL SYSTEM); the vehicle experienced electrical failures and the battery failed to hold a charge, and the vehicle was not operational. Additionally, the transmission was extremely low on transmission fluid, and the differential was leaking oil. The contact stated that after the recall repair was completed, the previous failures worsened. The dealer was notified of the failure. The vehicle was not repaired. The manufacturer was notified of the failure. The failure mileage was 18,300.

The contact owns a 2022 Jeep Wrangler. The contact stated that approximately one month prior to receiving notification of NHTSA Campaign Number: 25V741000 (ELECTRICAL SYSTEM); the vehicle experienced electrical failures and the battery failed to hold a charge, and the vehicle was not operational. Additionally, the transmission was extremely low on transmission fluid, and the differential was leaking oil. The contact stated that after the recall repair was completed, the previous failures worsened. The dealer was notified of the failure. The vehicle was not repaired. The manufacturer was notified of the failure. The failure mileage was 18,300.

DEATH WOBBLE repeatedly while traveling on the highway at speeds above 60 MPH. Where is a terrain surface change, asphalt to bridge or and seam in the road cause a violent shaking of the front of the car. This has happened multiple times. I took the car to a car repair, there was no visual issues seen, but the repair people told me they no longer buy Jeeps as their personal vehocle because of the death wobble. They did not recommend a sway bar because in their experience it did not correct the issue.

I do believe the part that is failing on the 2022 Jeep Wrangler Unlimited is the “Steering Dampner” and anyone at anytime is MORE than welcome to look at and inspect touched or feel it. This is SAFETY RISK has the entire vehicle starts to shake and wobble uncontrollably and without warning. If not for quick reflexes we would have been in a chain reaction crash. Was able to release gas and coast to under 50mph making lots of people behind me unhappy. The dealer said he repaired dampner when we had 4,000 miles, now again at 16,700 miles it’s back and we almost ended upside down in a river. Either Jeep or NHTSA must need people to die before they can make truly effective repairs or just remove this model form inventory. I believe it has to be more than just a dampner and the front suspension parts should all be looked at. There was ABSOLUTELY no warnings, lights, sounds, or indication that we were almost plunged to our death. Angels had to be riding with us. Let’s get this fixed!! PLEASE 🙏🏻

My 2022 Jeep Wrangler 4xe experienced a sudden loss of power while driving on Interstate 285 in Atlanta during rush hour traffic. The vehicle began shaking and lunging forward unpredictably while I attempted to exit the highway. With hazard lights on, I slowly crept the vehicle to the dealership because it could barely move. The vehicle is currently at the dealership for Recall 68C related to the hybrid battery system. This incident created a dangerous situation on a major interstate and could have caused a serious accident.

My 2022 Jeep Wrangler 4xe experienced a sudden loss of power while driving on Interstate 285 in Atlanta during rush hour traffic. The vehicle began shaking and lunging forward unpredictably while I attempted to exit the highway. With hazard lights on, I slowly crept the vehicle to the dealership because it could barely move. The vehicle is currently at the dealership for Recall 68C related to the hybrid battery system. This incident created a dangerous situation on a major interstate and could have caused a serious accident.

"Performance Limited Service Fuel System"- showing while slowing down/coasting to a stop ion a 2022 Wrangler 2.0 Dealer can not help- they mentioned there is no recall and that they can not do anything about it.

We took the car in for the death shake and were informed there was a recall on the Jeep (25V741000). The dealership performed the maintenance work. The 12V battery was also inspected and listed as good. Since the repair, the 12V battery has shorted multiple times and finally ceased running yesterday. It has been two weeks since the dealership recall repair. While the recall specifically impacted the HV battery, the 12V is interconnected and the liklihood of that battery being impacted is high. The safety impact is the car temporarily not being able to gain power after stopping at red lights and the battery draining when stopped or turned off. The check engine light appears every time.

Vehicle communication failures. One point unable to start the vehicle. Then the wipers and all warning lights came on without being able to turn the vehile off. Had to disconnect both batteries while the wipers destroyed themselves on a dry windshield. This is also causing a Service Shifter warning light then total loss of power steering while driving down the road at any speed. This includes highway speeds. Dealer replaced power steering system with no resolution. Thousands of dollars in repair. Dealer stated they repaired wiring. Did not fix the issue. Now it is more intermittent. When the communication between modules is not functioning properly it disables the power steering even while driving. This is extremely dangerous and I can no longer trust my vehicle. There are thousands of reports and or reviews about this issue. Someone has to be held accountable. I have spent thousands and my Dealer spent weeks trying to resolve the issue. Jeep has roughly 37000 miles. This is an on going issue since October of 2025.

Vehicle communication failures. One point unable to start the vehicle. Then the wipers and all warning lights came on without being able to turn the vehile off. Had to disconnect both batteries while the wipers destroyed themselves on a dry windshield. This is also causing a Service Shifter warning light then total loss of power steering while driving down the road at any speed. This includes highway speeds. Dealer replaced power steering system with no resolution. Thousands of dollars in repair. Dealer stated they repaired wiring. Did not fix the issue. Now it is more intermittent. When the communication between modules is not functioning properly it disables the power steering even while driving. This is extremely dangerous and I can no longer trust my vehicle. There are thousands of reports and or reviews about this issue. Someone has to be held accountable. I have spent thousands and my Dealer spent weeks trying to resolve the issue. Jeep has roughly 37000 miles. This is an on going issue since October of 2025.

We have had the death wobble happen several times when driving. It was so violently shaking we tried to stop quick on a 75 mph hiway. Very dangerous and scary. This has happened many times over the last month. Had wheels realignment and new shocks. Still happening

We have had the death wobble happen several times when driving. It was so violently shaking we tried to stop quick on a 75 mph hiway. Very dangerous and scary. This has happened many times over the last month. Had wheels realignment and new shocks. Still happening

Vehicle communication failures. One point unable to start the vehicle. Then the wipers and all warning lights came on without being able to turn the vehile off. Had to disconnect both batteries while the wipers destroyed themselves on a dry windshield. This is also causing a Service Shifter warning light then total loss of power steering while driving down the road at any speed. This includes highway speeds. Dealer replaced power steering system with no resolution. Thousands of dollars in repair. Dealer stated they repaired wiring. Did not fix the issue. Now it is more intermittent. When the communication between modules is not functioning properly it disables the power steering even while driving. This is extremely dangerous and I can no longer trust my vehicle. There are thousands of reports and or reviews about this issue. Someone has to be held accountable. I have spent thousands and my Dealer spent weeks trying to resolve the issue. Jeep has roughly 37000 miles. This is an on going issue since October of 2025.

On 3/3/2026, I brought me JEEP 4XE to the Jeep dealership in Paris, Kentucky to have the 68C recall performed. The Jeep dealership used version #7 of the 68C recall instructions to updated all software modules and then to perform a 7 mile test run to engage the electric engine and to stress the vehicle per the instructions documented in the recall instructions. Document is identified as: * High Voltage Battery * Reference: 68C/NHTSA 25V-741 * Revision: 7 * Edition: February 2026 * Details: Additional DTC added to the end of Section B. BPCM software update After picking vehicle up from dealership, I proceeded home via a state highway Route 68 (Paris Pike). The roadway is a 4 lane divided highway and has a speed limit of 55mph. I set my vehicle to HYBRID mode and then placed it on cruise control as I had done numerous times over its 25,000 miles. During the drive there were occasional rolling hills and inclines. I gauged the hills to be about a 1% grade on average but never exceeding 2% grade. During these inclines, the gasoline engine engaged and the RPM gauge on the instrument cluster registered 3000RPM. This excessive engine RPM had NEVER occurred before the 68C factory recall procedure. In all other instances of the engine engaging, the RPM would engage at 2000RPM. I contend that the the engagement of the gasoline engine on these small inclines was NOT warranted and that the excessive RPM's of 3000 is not normal and was never experienced prior to the 68C recall fix. I am submitting this information for review and documentation. Video of the instrument cluster gauge showing the RMP gauage and the display panel showing the engine and battery kW used were taken to document the process. I believe that the engagement of the gasoline engine at 3000RPM will cause excessive wear of the engine and is a direct result of one of the software updates that was used to complete the 68C recall.

On 3/3/2026, I brought me JEEP 4XE to the Jeep dealership in Paris, Kentucky to have the 68C recall performed. The Jeep dealership used version #7 of the 68C recall instructions to updated all software modules and then to perform a 7 mile test run to engage the electric engine and to stress the vehicle per the instructions documented in the recall instructions. Document is identified as: * High Voltage Battery * Reference: 68C/NHTSA 25V-741 * Revision: 7 * Edition: February 2026 * Details: Additional DTC added to the end of Section B. BPCM software update After picking vehicle up from dealership, I proceeded home via a state highway Route 68 (Paris Pike). The roadway is a 4 lane divided highway and has a speed limit of 55mph. I set my vehicle to HYBRID mode and then placed it on cruise control as I had done numerous times over its 25,000 miles. During the drive there were occasional rolling hills and inclines. I gauged the hills to be about a 1% grade on average but never exceeding 2% grade. During these inclines, the gasoline engine engaged and the RPM gauge on the instrument cluster registered 3000RPM. This excessive engine RPM had NEVER occurred before the 68C factory recall procedure. In all other instances of the engine engaging, the RPM would engage at 2000RPM. I contend that the the engagement of the gasoline engine on these small inclines was NOT warranted and that the excessive RPM's of 3000 is not normal and was never experienced prior to the 68C recall fix. I am submitting this information for review and documentation. Video of the instrument cluster gauge showing the RMP gauage and the display panel showing the engine and battery kW used were taken to document the process. I believe that the engagement of the gasoline engine at 3000RPM will cause excessive wear of the engine and is a direct result of one of the software updates that was used to complete the 68C recall.

Electronic Cabin Heater- EV/ Hybrid component that acts as a heating element when driving in electric mode. Common issue since the Chrysler Pacifica eHybrid plug in vehicle was manufactured. Safety: Extreme temperatures we’ve experienced would prevent heat from dispersing in the engine cabin and potential damage to engine/ EV components due to no thermal regulation. Has been reproduced and replaced. Specific to Jeep Wrangler 4xe (2021+): “Electric mode unavailable; Cabin heating/cooling” Check Engine light with DTC codes P0E80-00 and P0E15-00 present on dash. First appeared October 31st, 2025.

Electronic Cabin Heater- EV/ Hybrid component that acts as a heating element when driving in electric mode. Common issue since the Chrysler Pacifica eHybrid plug in vehicle was manufactured. Safety: Extreme temperatures we’ve experienced would prevent heat from dispersing in the engine cabin and potential damage to engine/ EV components due to no thermal regulation. Has been reproduced and replaced. Specific to Jeep Wrangler 4xe (2021+): “Electric mode unavailable; Cabin heating/cooling” Check Engine light with DTC codes P0E80-00 and P0E15-00 present on dash. First appeared October 31st, 2025.

On 3/3/2026, I brought me JEEP 4XE to the Jeep dealership in Paris, Kentucky to have the 68C recall performed. The Jeep dealership used version #7 of the 68C recall instructions to updated all software modules and then to perform a 7 mile test run to engage the electric engine and to stress the vehicle per the instructions documented in the recall instructions. Document is identified as: * High Voltage Battery * Reference: 68C/NHTSA 25V-741 * Revision: 7 * Edition: February 2026 * Details: Additional DTC added to the end of Section B. BPCM software update After picking vehicle up from dealership, I proceeded home via a state highway Route 68 (Paris Pike). The roadway is a 4 lane divided highway and has a speed limit of 55mph. I set my vehicle to HYBRID mode and then placed it on cruise control as I had done numerous times over its 25,000 miles. During the drive there were occasional rolling hills and inclines. I gauged the hills to be about a 1% grade on average but never exceeding 2% grade. During these inclines, the gasoline engine engaged and the RPM gauge on the instrument cluster registered 3000RPM. This excessive engine RPM had NEVER occurred before the 68C factory recall procedure. In all other instances of the engine engaging, the RPM would engage at 2000RPM. I contend that the the engagement of the gasoline engine on these small inclines was NOT warranted and that the excessive RPM's of 3000 is not normal and was never experienced prior to the 68C recall fix. I am submitting this information for review and documentation. Video of the instrument cluster gauge showing the RMP gauage and the display panel showing the engine and battery kW used were taken to document the process. I believe that the engagement of the gasoline engine at 3000RPM will cause excessive wear of the engine and is a direct result of one of the software updates that was used to complete the 68C recall.

After 68C recall fix in January, the following has occurred:  -Check engine light on immediately -Replaced electric coolant heater  -Sluggish in both hybrid and electric modes -FORM indicators - constant fuel oil refresh mode  -Change oil required indicator on  -Engine revving high at low speeds  -Jumping when putting into drive / idling / shifting issues  --Replaced all 4 shocks And just yesterday on 2/27/26: Complete and total loss of power while driving on the highway. Major safety issue and a near crash.

I have experienced what is call "death wobble" multipletimes. This is a 2022 with 30k millage. It has been to a service center three times and the drag link with ends has been replaced twice. The problem continues and only happens at highway speed. This issue has put us in what could have been a serious accident with semi-trucks on 50+ mph multiple times. I feel like this is a possible life threatening situation. I have a dash cam video of this happening and have had multiple servers centers inspect it. They have not been able to reproduce the issue, highly intermittent. To have an authorized agent look at it, I will have to pay a $229 diagnostic fee. When this death wobble occurs, there is no warning at all.

After 68C recall fix in January, the following has occurred:  -Check engine light on immediately -Replaced electric coolant heater  -Sluggish in both hybrid and electric modes -FORM indicators - constant fuel oil refresh mode  -Change oil required indicator on  -Engine revving high at low speeds  -Jumping when putting into drive / idling / shifting issues  --Replaced all 4 shocks And just yesterday on 2/27/26: Complete and total loss of power while driving on the highway. Major safety issue and a near crash.

I have experienced what is call "death wobble" multipletimes. This is a 2022 with 30k millage. It has been to a service center three times and the drag link with ends has been replaced twice. The problem continues and only happens at highway speed. This issue has put us in what could have been a serious accident with semi-trucks on 50+ mph multiple times. I feel like this is a possible life threatening situation. I have a dash cam video of this happening and have had multiple servers centers inspect it. They have not been able to reproduce the issue, highly intermittent. To have an authorized agent look at it, I will have to pay a $229 diagnostic fee. When this death wobble occurs, there is no warning at all.

After 68C recall fix in January, the following has occurred:  -Check engine light on immediately -Replaced electric coolant heater  -Sluggish in both hybrid and electric modes -FORM indicators - constant fuel oil refresh mode  -Change oil required indicator on  -Engine revving high at low speeds  -Jumping when putting into drive / idling / shifting issues  --Replaced all 4 shocks And just yesterday on 2/27/26: Complete and total loss of power while driving on the highway. Major safety issue and a near crash.

OUR VEHICLE HAS BEEN. UNDRIVEABLE SINCE RECALL 68C/25V-741 AND HAS BEEN AT THE JEEP DEALER (FRIENDSHIP JEEP CHRYSLER IN FOREST CITY NC) SINCE 1/5/2026 WITH NO GUIDANCE AS TO WHEN TO EXPECT A FIX AND RETURN TO US. BETWEEN CAR PAYMENTS, INSURANCE PAYMENTS, AND ACCELERATED DEPRECIATION WE HAVE LOST THOUSANDS OF DOLLARS AND WE ARE NOT ABLE TO USE THE VEHICLE.

OUR VEHICLE HAS BEEN. UNDRIVEABLE SINCE RECALL 68C/25V-741 AND HAS BEEN AT THE JEEP DEALER (FRIENDSHIP JEEP CHRYSLER IN FOREST CITY NC) SINCE 1/5/2026 WITH NO GUIDANCE AS TO WHEN TO EXPECT A FIX AND RETURN TO US. BETWEEN CAR PAYMENTS, INSURANCE PAYMENTS, AND ACCELERATED DEPRECIATION WE HAVE LOST THOUSANDS OF DOLLARS AND WE ARE NOT ABLE TO USE THE VEHICLE.

We had a recent recall completed for the hybrid battery/charging sytem where a software update was all that was required. Two weeks after a recall for the hybrid battery/charging system was completed, while traveling, we had a loss of power at 70mph in heavy traffic, and our vehicle stopped operating. We were able to limp our vehicle to the right shoulder, and was stranded on the side of I-75 south in GA, approximately 200 miles from home. The dash lights began flashing on and off, the various systems began flasing warnings and there was a burning smell of plastic. We discovered one of the electric lines attached to the fuse block in the engine compartment had melted at the terminal junction on the fuse block. This rendered us incapable of moving our vehicle. We had to call for a tow truck to have the vehicle taken to a shop. Our daughter had to come from 6 hours away to pick us up. Currently, 02/20/26, the shop that has our vehicle, is trying to get a replacement fuse block and determine if this is part of the recall that should have fixed our original recall issue.

The contact owns a 2022 Jeep Wrangler. The contact received notification of NHTSA Campaign Number: 25V741000 (Electrical System). The vehicle was taken to the dealer, and the contact was informed that the part to do the recall repair was not yet available. The contact stated that when the vehicle was started, the message "Electric Mode Temporarily Unavailable - Fuel and Oil Refresh in Progress" was displayed. The message was more prevalent during colder weather. The vehicle remained at the dealer unrepaired. The contact stated that the manufacturer had exceeded a reasonable amount of time for the recall repair. The manufacturer was not made aware of the issue. The failure mileage was 14,988.

While driving under normal conditions, the vehicle suddenly became unstable and difficult to control. Steering response was abnormal, and the vehicle did not behave as expected, creating a loss of stability and control. The incident occurred without warning and required the vehicle to be towed. This event raised serious safety concerns, as the vehicle appeared prone to instability and unsafe operation. The vehicle has a history of repeated mechanical and safety-related issues that were previously addressed through warranty service but not resolved. Despite prior repairs, the unsafe condition persisted and culminated in this incident. The manufacturer was notified of the ongoing defects and safety concerns but did not provide corrective resolution beyond referring the vehicle back to dealership service.

While driving under normal conditions, the vehicle suddenly became unstable and difficult to control. Steering response was abnormal, and the vehicle did not behave as expected, creating a loss of stability and control. The incident occurred without warning and required the vehicle to be towed. This event raised serious safety concerns, as the vehicle appeared prone to instability and unsafe operation. The vehicle has a history of repeated mechanical and safety-related issues that were previously addressed through warranty service but not resolved. Despite prior repairs, the unsafe condition persisted and culminated in this incident. The manufacturer was notified of the ongoing defects and safety concerns but did not provide corrective resolution beyond referring the vehicle back to dealership service.

While driving under normal conditions, the vehicle suddenly became unstable and difficult to control. Steering response was abnormal, and the vehicle did not behave as expected, creating a loss of stability and control. The incident occurred without warning and required the vehicle to be towed. This event raised serious safety concerns, as the vehicle appeared prone to instability and unsafe operation. The vehicle has a history of repeated mechanical and safety-related issues that were previously addressed through warranty service but not resolved. Despite prior repairs, the unsafe condition persisted and culminated in this incident. The manufacturer was notified of the ongoing defects and safety concerns but did not provide corrective resolution beyond referring the vehicle back to dealership service.

The contact owns a 2022 Jeep Wrangler. The contact received notification of NHTSA Campaign Number: 25V741000 (Electrical System), and the vehicle was taken to the dealer, where the high voltage battery software update was performed; however, the contact stated that the vehicle failed to start three days later. The message " Service Charging System" was displayed. The vehicle was towed to the dealer, where it was diagnosed with a 12-Volt battery failure. The contact stated that upon researching the failure online, the contact learned from other vehicle owners that other recalled vehicles had experienced the 12-Voltsbattery failure after the high voltage battery software update was performed. The manufacturer was notified of the failure, but no assistance was provided. The vehicle was not repaired. The failure mileage was approximately 44,000.

The contact owns a 2022 Jeep Wrangler. The contact stated that after using the remote starter to start the vehicle, the front window defroster was activated, and approximately 10 minutes later, the contact discovered that the front windshield had developed a 5-inch crack in the center of the windshield. The contact stated that moments later, while driving, the crack expanded to approximately 12-inches towards the driver’s side. The contact stated that the crack was in the direct field of view of the driver, creating a visibility hazard. The cause of the failure was not yet determined. The local dealer and manufacturer were notified of the failure, but no assistance was offered. The failure mileage was 22,000.

My Jeep Wrangler 4xe underwent Safety Recall 68C, which included high-voltage battery replacement and associated electrical system work. The vehicle was held at the Jeep dealership for approximately one month for completion of this recall. After being notified that Recall 68C was completed, I picked up the vehicle. Immediately upon pickup, I experienced electrical issues that were not present prior to the recall. Specifically, the passenger-side power running board failed to retract. The service manager accessed the area under the dashboard and restored operation, stating it was likely related to the battery replacement or electrical work performed during the recall. Upon driving the vehicle, I also noticed the steering wheel was not centered when driving straight, and the front end appeared visually misaligned. Less than 24 hours after pickup, while driving at approximately 65 mph on the freeway, the vehicle experienced sudden and violent steering oscillation consistent with death wobble. This required me to immediately pull over for safety. The vehicle had no prior history of death wobble, steering instability, or electrical running board issues before Recall 68C was performed. Due to the severity of the condition, the vehicle was towed back to the Jeep dealership for further inspection.

My Jeep Wrangler 4xe underwent Safety Recall 68C, which included high-voltage battery replacement and associated electrical system work. The vehicle was held at the Jeep dealership for approximately one month for completion of this recall. After being notified that Recall 68C was completed, I picked up the vehicle. Immediately upon pickup, I experienced electrical issues that were not present prior to the recall. Specifically, the passenger-side power running board failed to retract. The service manager accessed the area under the dashboard and restored operation, stating it was likely related to the battery replacement or electrical work performed during the recall. Upon driving the vehicle, I also noticed the steering wheel was not centered when driving straight, and the front end appeared visually misaligned. Less than 24 hours after pickup, while driving at approximately 65 mph on the freeway, the vehicle experienced sudden and violent steering oscillation consistent with death wobble. This required me to immediately pull over for safety. The vehicle had no prior history of death wobble, steering instability, or electrical running board issues before Recall 68C was performed. Due to the severity of the condition, the vehicle was towed back to the Jeep dealership for further inspection.

The contact owns a 2022 Jeep Wrangler. The contact received notification of NHTSA Campaign Number: 25V741000 (Electrical System). The vehicle was taken to the dealer and the contact was informed that the repair could not be performed because there were no loaner vehicles available, if the repair failed. The appointment was rescheduled for two weeks later. The dealer was contacted prior to the scheduled appointment date and the contact was informed again that no loaner vehicles were available. The manufacturer was made aware of the issue but provided no assistance. The contact was informed that the manufacturer could check with other dealers and about the availability of a loaner vehicle. The contact had not experienced a failure.

The vehicle poses a fire risk not allowing the vehicle to be parked under structures and the vehicle cannot be charged even though it is a plug-in hybrid vehicle. There is an active recall and this is not the first one. The fix for the recall is a software update that can shut off the high voltage battery if an issue is encountered which leaves the vehicle in limp mode, which is dangerous when traveling on the highway. If a new battery is required, the same faulty style batteries are exchanged. Stellantis is not addressing the car issues appropriately

The vehicle poses a fire risk not allowing the vehicle to be parked under structures and the vehicle cannot be charged even though it is a plug-in hybrid vehicle. There is an active recall and this is not the first one. The fix for the recall is a software update that can shut off the high voltage battery if an issue is encountered which leaves the vehicle in limp mode, which is dangerous when traveling on the highway. If a new battery is required, the same faulty style batteries are exchanged. Stellantis is not addressing the car issues appropriately

The vehicle poses a fire risk not allowing the vehicle to be parked under structures and the vehicle cannot be charged even though it is a plug-in hybrid vehicle. There is an active recall and this is not the first one. The fix for the recall is a software update that can shut off the high voltage battery if an issue is encountered which leaves the vehicle in limp mode, which is dangerous when traveling on the highway. If a new battery is required, the same faulty style batteries are exchanged. Stellantis is not addressing the car issues appropriately