AIR BAGS:FRONTAL:DRIVER CLOCKSPRING/SPIRAL CASSETTE
Defect Description
Chrysler (FCA US, LLC) (Stellantis) is recalling certain right hand drive 2016 Jeep Wrangler vehicles. Debris contamination may cause the clockspring to fail, preventing the driver's air bag from deploying in a crash.
Consequence
An air bag that does not deploy in a crash can increase the risk of injury.
Remedy
Dealers will replace the clockspring, steering wheel back cover, and steering column shrouds, free of charge. Owner notification letters were mailed April 4, 2024. Owners may contact FCA US, LLC customer service at 1-800-853-1403. FCA US, LLC's number for this recall is 27B.
1,831 vehicles affected
Manufacturer: Chrysler (FCA US, LLC) (Stellantis)
SEAT BELTS:FRONT:ANCHORAGE
Defect Description
Chrysler (FCA US LLC) is recalling certain 2011-2018 Jeep Wrangler right hand drive vehicles. The driver's seat belt buckle mounting strap may fracture and separate from the seat frame.
Consequence
A separated or severed seat belt buckle strap will result in an inoperable seat belt, increasing the risk of injury in the event of a crash.
Remedy
FCA US will notify owners, and dealers will replace the driver's seat belt buckle, free of charge. Interim notices informing owners of the safety risk were mailed November 19, 2019. Owners will received a second letter and the recall began March 26, 2020. Owners may contact FCA customer service a
... t 1-800-853-1403. FCA's number for this recall is VA6.Read more11,463 vehicles affected
Manufacturer: Chrysler (FCA US LLC)
AIR BAGS:FRONTAL:PASSENGER SIDE:INFLATOR MODULE
Defect Description
Chrysler (FCA US LLC) is recalling certain 2010 Dodge Ram 3500, Ram 4500/5500, 2010-2011 Dodge Dakota, 2010-2014 Dodge Challenger, 2010-2015 Dodge Challenger, Chrysler 300, and 2010-2016 Jeep Wrangler vehicles. Upon deployment of the driver's frontal air bag, excessive internal pressure may cause t
... he inflator to explode.Read moreConsequence
In the event of a crash necessitating deployment of the passenger's frontal air bag, the inflator could explode with metal fragments striking the vehicle occupants potentially resulting in serious injury or death.
Remedy
Owners are advised not to drive their vehicle until the recall repair is complete. Chrysler will notify owners, and dealers will replace the passenger frontal air bag inflator, free of charge. The recall began February 4, 2019. Owners may contact Chrysler customer service at 1-800-853-1403. Chry
... sler's number for this recall is V01.Read more1,413,222 vehicles affected
Manufacturer: Chrysler (FCA US LLC)
AIR BAGS:FRONTAL:SENSOR/CONTROL MODULE-INACTIVE
Defect Description
Chrysler (FCA US LLC) is recalling certain model year 2016-2017 Jeep Wrangler vehicles manufactured June 16, 2015, to August 14, 2016. In certain crash conditions, the front impact sensor wiring may be pulled until it detaches before a signal can be received by the Occupant Restraint Controller (OR
... C).Read moreConsequence
If the ORC module does not receive a signal from the front impact sensor, both frontal air bags and the seat belt pretensioners will not deploy in the event of a crash, increasing the risk of injury.
Remedy
Chrysler will notify owners, and dealers will reroute the front impact sensor wiring and relocate the impact sensor branch, free of charge. The recall began on November 10, 2016. Owners may contact Chrysler customer service at 1-800-853-1403. Chrysler's number for this recall is S76.
182,743 vehicles affected
Manufacturer: Chrysler (FCA US LLC)
AIR BAGS:FRONTAL:DRIVER SIDE:INFLATOR MODULE
Defect Description
Chrysler (FCA US LLC) is recalling certain model year 2011-2016 Right Hand Drive Jeep Wrangler vehicles manufactured February 16, 2010, to May 2, 2016. The clockspring assembly may become contaminated with dust and cause the air bag circuit to fail.
Consequence
Failure of the air bag circuit may prevent the driver's frontal air bag from deploying in the event of a crash, increasing the risk of injury.
Remedy
Chrysler will notify owners, and dealers will replace the clockspring, wheel back cover, and column shroud, free of charge. The recall began on August 11, 2016. Owners may contact Chrysler customer service at 1-800-853-1403. Chrysler's number for this recall is S40.
7,196 vehicles affected
Manufacturer: Chrysler (FCA US LLC)
Complaint Statistics
619 total complaints
37 crashes 25 fires 50 injuries
Top Reported Components
| Component | Complaints |
|---|
| SERVICE BRAKES | 102 |
| ENGINE | 87 |
| AIR BAGS | 76 |
| POWER TRAIN | 72 |
| UNKNOWN OR OTHER | 52 |
| ELECTRICAL SYSTEM | 52 |
| VEHICLE SPEED CONTROL | 31 |
| STEERING | 25 |
| STRUCTURE:BODY | 16 |
| ELECTRONIC STABILITY CONTROL (ESC) | 13 |
Incident date: Feb 8, 2026
ABS Module has gone bad. Has an internal communication error. This is typical on these vehicles. The problem is getting a part from Chrysler. The modules have been on back order for years and there’s no sign of getting a fix. The vehicle is unsafe to drive but we are left with no choice but to con
... tinue to drive it. Why hasn’t anything been done to kick them in gear and get replacement parts made?Read more
Incident date: Oct 6, 2025
I own a 2016 Jeep Wrangler with a malfunctioning Anti-lock Braking System (ABS). The ABS is not functioning, creating a serious safety risk, particularly during emergency braking and adverse road conditions. The vehicle has been under an active repair order with Town & Country Jeep Chrysler Dodge Ra
... m since October, but the required part remains on indefinite backorder with no estimated time of arrival. I have escalated this issue to Stellantis Customer Care and have ongoing email correspondence documenting the delay and lack of resolution. Despite these efforts, the vehicle remains unrepaired, forcing me to either drive with a known safety defect or go without transportation. This situation represents a failure to repair a critical safety system within a reasonable timeframe. I am submitting this complaint due to the ongoing safety risk and lack of timely resolution.Read more
Incident date: Dec 12, 2024
Just like many other people have wrote about, the ABS SENSOR is defective. The ABS light comes and the traction light does also. Jeep has been aware of the problem for 18 months to 2 years. There is no fix or replacement sensor in sight.
Incident date: Dec 12, 2024
Just like many other people have wrote about, the ABS SENSOR is defective. The ABS light comes and the traction light does also. Jeep has been aware of the problem for 18 months to 2 years. There is no fix or replacement sensor in sight.
Incident date: Jan 29, 2026
MY GIRLFRIEND ALMOST CRASHED GOING DOWN A HILL TOWARD A STOP SIGN FOR A BUSY INTERSECTION FOR A ROAD THAT IS ALONG A CLIFFSIDE. JEEP CANNOT GET A PART FOR THIS VEHICLE AFTER NUMEROUS ATTEMPTS TO GET ONE. NEEDS AN ABS MODULE AS ONE OF THE WHEEL SPEED SENSOR CIRCUITS IS NOT COMMUNICATING. I HAVE REACH
... ED OUT TO MULTIPLE MODULE REBUILDERS AND THEY ARE UNABLE TO GET PARTS FOR THIS MODULE ANYMORE. THIS IS A WELL-KNOWN ISSUE WITH THE WRANGLERS AND JEEP IS NOT WILLING TO RELEASE A RECALL TO MAKE IT RIGHT. DUE TO PARTS SHORTAGE, THE MODULES ARE GOING ONLINE FOR $1500-$2000, WHICH FOR A MAJOR SAFETY COMPONENT CAN BE A LARGE ISSUE. WE HAVE SINCE PARKED THE VEHICLE FOR THE PAST 3 MONTHS WHILE I ATTEMPT TO LOCATE A REASONABLY PRICED MODULE OR FIND SOMEBODY THAT HAS THE CHIPS/CAPACITORS TO REBUILD IT. I AM A DEALERSHIP TECHNICIAN WITH 7 YEARS OF EXPERIENCE AND WE HAVE SENT LOTS OF THESE VEHICLES TO AUCTION FOR THE SAME CONCERN.Read more
Incident date: Dec 31, 1969
ABS module reported to dealer in February, 2025..They said was safe to drive. Then April 2025 the module went out.-Part has been on backorder since March 2025. It was taken to Key Chrysler Dodge Jeep in Marianna in March 2025. Jeep would not steer properly, the brakes were not normal and all the w
... arning lights on dash were on. I could not drive. .Read more
Incident date: Dec 31, 1969
ABS module reported to dealer in February, 2025..They said was safe to drive. Then April 2025 the module went out.-Part has been on backorder since March 2025. It was taken to Key Chrysler Dodge Jeep in Marianna in March 2025. Jeep would not steer properly, the brakes were not normal and all the w
... arning lights on dash were on. I could not drive. .Read more
Incident date: Dec 31, 1969
ABS module reported to dealer in February, 2025..They said was safe to drive. Then April 2025 the module went out.-Part has been on backorder since March 2025. It was taken to Key Chrysler Dodge Jeep in Marianna in March 2025. Jeep would not steer properly, the brakes were not normal and all the w
... arning lights on dash were on. I could not drive. .Read more
Incident date: Feb 12, 2026
Pulled into parking space. Applied brakes and came to a complete stop. Could hear engine revving up.. Thought ok, that gas pedal seem to be pressed. Look at my foot wasn’t pressing the pedal. Looked at floor mats. It was laying flat on floor, not manipulating the pedal. I thought what’s happenin
... g? And lifted foot off brake ever so slightly and car jumped 6 inch high curb and hit the building.. Pretty hard. Caused structural damage to the wall. I went to the hospital, driven by husband. Swelling of my right leg on the shin. Released and told to stay off leg for few days, no fractures.After doing research, It seems other jeep riders have had this experience. I have no idea how fast the jeep was going.Read more
Crash
1 injured
Incident date: Feb 12, 2026
Pulled into parking space. Applied brakes and came to a complete stop. Could hear engine revving up.. Thought ok, that gas pedal seem to be pressed. Look at my foot wasn’t pressing the pedal. Looked at floor mats. It was laying flat on floor, not manipulating the pedal. I thought what’s happenin
... g? And lifted foot off brake ever so slightly and car jumped 6 inch high curb and hit the building.. Pretty hard. Caused structural damage to the wall. I went to the hospital, driven by husband. Swelling of my right leg on the shin. Released and told to stay off leg for few days, no fractures.After doing research, It seems other jeep riders have had this experience. I have no idea how fast the jeep was going.Read more
Crash
1 injured
Incident date: Feb 12, 2026
Pulled into parking space. Applied brakes and came to a complete stop. Could hear engine revving up.. Thought ok, that gas pedal seem to be pressed. Look at my foot wasn’t pressing the pedal. Looked at floor mats. It was laying flat on floor, not manipulating the pedal. I thought what’s happenin
... g? And lifted foot off brake ever so slightly and car jumped 6 inch high curb and hit the building.. Pretty hard. Caused structural damage to the wall. I went to the hospital, driven by husband. Swelling of my right leg on the shin. Released and told to stay off leg for few days, no fractures.After doing research, It seems other jeep riders have had this experience. I have no idea how fast the jeep was going.Read more
Crash
1 injured
Incident date: Feb 22, 2026
Anti-Lock Brake System stopped working rendering the car inoperable. The first incident: about 5 years ago the ABS engaged the brakes while driving almost causing a collision. This incident occurred in Guaynabo, PR. After this incident the ABS Module stopped working but the car was still operable. A
... week ago the PCM lost communication with the ABS module bringing the car into "limp mode" (stuck in 3rd gear until y did not longer engaged the transmission. Also the speedometer stopped working.) This happened while driving on a Sunday on busy road. This has been a common issue with Jeep Wranglers made from 2012 to 2018. The company at this moment is not producing replacement parts (ABS Modules) for these vehicles leaving owners without any way to fix or use their cars. ABS Module DTC's: -C2200 -U0100 -U0141 -U0126 -U0002 While scanning the module comes and goes offline.Read more
Incident date: Feb 22, 2026
Anti-Lock Brake System stopped working rendering the car inoperable. The first incident: about 5 years ago the ABS engaged the brakes while driving almost causing a collision. This incident occurred in Guaynabo, PR. After this incident the ABS Module stopped working but the car was still operable. A
... week ago the PCM lost communication with the ABS module bringing the car into "limp mode" (stuck in 3rd gear until y did not longer engaged the transmission. Also the speedometer stopped working.) This happened while driving on a Sunday on busy road. This has been a common issue with Jeep Wranglers made from 2012 to 2018. The company at this moment is not producing replacement parts (ABS Modules) for these vehicles leaving owners without any way to fix or use their cars. ABS Module DTC's: -C2200 -U0100 -U0141 -U0126 -U0002 While scanning the module comes and goes offline.Read more
Incident date: Jul 31, 2025
My ABS module has been in error for 8 months. Stellantis still cannot fill the order after 8 months and only keeps delaying on weeks at a time .
Incident date: Feb 16, 2026
While driving my vehicle on Monday, February 16, 2026 I heard a loud pop come from the front of the vehicle. Right after that smoke began to come through the hood vents. I stopped the vehicle to inspect and at that point the engine compartment was burning heavily. I could barely get out of the vehic
... le and away before the whole front end of the vehicle was engulfed with fire and heavy black smoke. It looked as if the fire started somewhere on the righthand side of the engine compartment because the right front tire was the first to blow out in the fire. The vehicle is with the insurance company to inspect, but it was in perfect running condition, all maintenance performed. There were no dash warning lights that came on, no odd sounds heard and the vehicle ran until I stopped and shut it office. There has to be something that was wrong with the manufacturing of this specific engine to make a loud pop and burn as hot as it did. I wanted to report this before the vehicle is sent away to be demolished due to it being a complete loss.Read more
Fire
Incident date: Feb 16, 2026
While driving my vehicle on Monday, February 16, 2026 I heard a loud pop come from the front of the vehicle. Right after that smoke began to come through the hood vents. I stopped the vehicle to inspect and at that point the engine compartment was burning heavily. I could barely get out of the vehic
... le and away before the whole front end of the vehicle was engulfed with fire and heavy black smoke. It looked as if the fire started somewhere on the righthand side of the engine compartment because the right front tire was the first to blow out in the fire. The vehicle is with the insurance company to inspect, but it was in perfect running condition, all maintenance performed. There were no dash warning lights that came on, no odd sounds heard and the vehicle ran until I stopped and shut it office. There has to be something that was wrong with the manufacturing of this specific engine to make a loud pop and burn as hot as it did. I wanted to report this before the vehicle is sent away to be demolished due to it being a complete loss.Read more
Fire
Incident date: Feb 16, 2026
While driving my vehicle on Monday, February 16, 2026 I heard a loud pop come from the front of the vehicle. Right after that smoke began to come through the hood vents. I stopped the vehicle to inspect and at that point the engine compartment was burning heavily. I could barely get out of the vehic
... le and away before the whole front end of the vehicle was engulfed with fire and heavy black smoke. It looked as if the fire started somewhere on the righthand side of the engine compartment because the right front tire was the first to blow out in the fire. The vehicle is with the insurance company to inspect, but it was in perfect running condition, all maintenance performed. There were no dash warning lights that came on, no odd sounds heard and the vehicle ran until I stopped and shut it office. There has to be something that was wrong with the manufacturing of this specific engine to make a loud pop and burn as hot as it did. I wanted to report this before the vehicle is sent away to be demolished due to it being a complete loss.Read more
Fire
Incident date: Nov 30, 2025
I HAVE A FAULTY ABS MODULE, THROWING CODE C2200. THE PART HAS BEEN ON ORDER FOR OVER 2 MONTHS WITH NO END IN SITE. WE ARE BEING TOLD TOLD THAT THIS IS NOT A SAFETY ISSUE. HOW CAN WE GET THIS RESOLVED???
Incident date: Feb 13, 2026
Head gasket failure, causing motor to overheat.
Incident date: Dec 23, 2025
Unsafe Vehicle, Unresolved Mechanical Failures – Serious Safety Concern On [XXX], I purchased a Jeep (VIN: [XXX] ) from Whipple Auto Sales. Since the purchase, the vehicle has experienced repeated mechanical failures that have created serious safety concerns. Approximately two weeks after purcha
... se, the dealership replaced a fuel injector due to performance issues. About one month later, the vehicle began showing sensor codes and experienced sudden power loss while driving. On [XXX] the vehicle completely shut off while I was traveling on the highway, placing my safety at significant risk. The dealership initially stated that the key required reprogramming. However, after keeping the vehicle for approximately one month, they were still unable to repair the issue. The dealership later claimed the problem was related to the powertrain. Without resolving the issue or providing proper notice, they returned the vehicle to my residence in worse condition than when it was left with them. At this time, the vehicle is unsafe and unreliable, and I cannot confidently operate it. This situation demonstrates a lack of proper repair, accountability, and resolution. I am extremely concerned about the safety and reliability of this vehicle and the dealership’s handling of this matter. I am seeking a proper resolution to this issue. INFORMATION REDACTED PURSUANT TO THE FREEDOM OF INFORMATION ACT (FOIA), 5 U.S.C. 552(B)(6)Read more
Incident date: Dec 23, 2025
Unsafe Vehicle, Unresolved Mechanical Failures – Serious Safety Concern On [XXX], I purchased a Jeep (VIN: [XXX] ) from Whipple Auto Sales. Since the purchase, the vehicle has experienced repeated mechanical failures that have created serious safety concerns. Approximately two weeks after purcha
... se, the dealership replaced a fuel injector due to performance issues. About one month later, the vehicle began showing sensor codes and experienced sudden power loss while driving. On [XXX] the vehicle completely shut off while I was traveling on the highway, placing my safety at significant risk. The dealership initially stated that the key required reprogramming. However, after keeping the vehicle for approximately one month, they were still unable to repair the issue. The dealership later claimed the problem was related to the powertrain. Without resolving the issue or providing proper notice, they returned the vehicle to my residence in worse condition than when it was left with them. At this time, the vehicle is unsafe and unreliable, and I cannot confidently operate it. This situation demonstrates a lack of proper repair, accountability, and resolution. I am extremely concerned about the safety and reliability of this vehicle and the dealership’s handling of this matter. I am seeking a proper resolution to this issue. INFORMATION REDACTED PURSUANT TO THE FREEDOM OF INFORMATION ACT (FOIA), 5 U.S.C. 552(B)(6)Read more
Incident date: Dec 23, 2025
Unsafe Vehicle, Unresolved Mechanical Failures – Serious Safety Concern On [XXX], I purchased a Jeep (VIN: [XXX] ) from Whipple Auto Sales. Since the purchase, the vehicle has experienced repeated mechanical failures that have created serious safety concerns. Approximately two weeks after purcha
... se, the dealership replaced a fuel injector due to performance issues. About one month later, the vehicle began showing sensor codes and experienced sudden power loss while driving. On [XXX] the vehicle completely shut off while I was traveling on the highway, placing my safety at significant risk. The dealership initially stated that the key required reprogramming. However, after keeping the vehicle for approximately one month, they were still unable to repair the issue. The dealership later claimed the problem was related to the powertrain. Without resolving the issue or providing proper notice, they returned the vehicle to my residence in worse condition than when it was left with them. At this time, the vehicle is unsafe and unreliable, and I cannot confidently operate it. This situation demonstrates a lack of proper repair, accountability, and resolution. I am extremely concerned about the safety and reliability of this vehicle and the dealership’s handling of this matter. I am seeking a proper resolution to this issue. INFORMATION REDACTED PURSUANT TO THE FREEDOM OF INFORMATION ACT (FOIA), 5 U.S.C. 552(B)(6)Read more
Incident date: Jan 22, 2026
ABS Module Part# 68259556AC has failed. (Replacement part is 68259556AD) Stellantis/Jeep has not provided a replacement part for over three years. This affects all Jeep Wranglers 2014-2018. We have no ABS and no traction control in our Jeeps. We need help.
Incident date: Feb 1, 2026
The ABS control module has failed. Anti-lock brake and stability management systems, in addition to vehicle descent control are malfunctioning. This renders the vehicle extremely unstable and difficult to drive. Stellantis is aware of the problem and reports no replacement parts are available and ha
... s not issued a recall. The vehicle has low milage and has never been in an accident.Read more
Incident date: Jun 3, 2024
The contact owns a 2016 Jeep Wrangler. The contact stated that while driving at an undisclosed speed, the vehicle jerked with an abnormal sound coming from the vehicle. The contact stopped the vehicle, and there was an unknown warning light illuminated. The vehicle was turned off and restarted; howe
... ver, while driving, the failure reoccurred with several unknown warning lights illuminated. The vehicle was towed to a private dealer, where it was diagnosed with ABS control module failure. The dealer informed the contact that the part to do the repair was not available. The vehicle remained with the dealer unrepaired. The contact related the failure to NHTS Campaign number: 22V426000 (SERVICE BRAKES, HYDRAULIC); however, the VIN was not included. The manufacturer was made aware of the failure. The failure mileage was approximately 77,000.Read more
Incident date: Mar 1, 2024
The ABS module for this vehicle has been on national back order for over 2 years. Numerous vehicles are involved. With the malfunction, ABS does not perform as intended and creates a safety hazard. In addition other functions are rendered inoperable such as cruise control, hill start, etc. There is
... no remedy for the defect and manufacturer seems unable to offer a solutionRead more
Incident date: May 9, 2025
My 2016 jeep wrangler jk will just stop running all power is lost, it's happened on the freeway as well as around town multiple times.. I get no codes. Once I can pull off the hiway it has always started back up after removing key and placing key back in ignition it starts again.. but it's has hap
... pened several times.. my wife and kids a to afraid to drive for fear it will happen again.Read more
Incident date: May 9, 2025
My 2016 jeep wrangler jk will just stop running all power is lost, it's happened on the freeway as well as around town multiple times.. I get no codes. Once I can pull off the hiway it has always started back up after removing key and placing key back in ignition it starts again.. but it's has hap
... pened several times.. my wife and kids a to afraid to drive for fear it will happen again.Read more
Incident date: May 9, 2025
My 2016 jeep wrangler jk will just stop running all power is lost, it's happened on the freeway as well as around town multiple times.. I get no codes. Once I can pull off the hiway it has always started back up after removing key and placing key back in ignition it starts again.. but it's has hap
... pened several times.. my wife and kids a to afraid to drive for fear it will happen again.Read more
Incident date: Dec 31, 1969
The ABS module failed 18 months ago. Jeep has been telling me that it's on back order this whole time with no ETA. In the meantime it will not pass inspection and I have no antilock brakes.
Incident date: Nov 4, 2025
Abs system fails periodically causing the jeep to go into limp mode driving in traffic.
Incident date: Jun 10, 2025
I recently got into an accident in my 2016 Jeep Wrangler. My airbags never deployed however. Also my buttons on the left side of my steering wheel do not work and my horn does not work. After realizing all this I believe it is an issue with the clock spring. I did research and found in 2024 there wa
... s a recall for the clock spring but only in the RHD model. My car is a LHD model but it seems the same issue has occurred and my clock spring failed.Read more
Crash
Incident date: Dec 8, 2023
The contact owns a 2016 Jeep Wrangler. The contact stated that while driving on wet roads, the vehicle lost traction, failed to accelerate as intended, and caused the tires to spin before accelerating. While depressing the brake pedal, the wheels locked up, and the vehicle failed to come to a gradua
... l stop. The ABS control module displayed DTC: C2200 (Internal ABS Module Failure). The vehicle was taken to the dealer, who confirmed the fault code. The vehicle was not repaired because the Part Number 68259556AD was on back order. The manufacturer was notified of the failure and informed the contact that the part was still under engineering review, and that a remedy had not yet been found. The failure mileage was approximately 150,000.Read more
Incident date: Oct 1, 2023
The ABS Module (Part 68259556AD) on my 2016 Jeep Wrangler began failing about two years ago. When the ABS warning light turns on, both the ABS and traction-control systems stop functioning, creating a serious safety hazard: greatly increased stopping distance, reduced steering control under braking,
... and higher risk of loss of control on wet or slippery roads. The warnings, once intermittent, are now continuously illuminated, meaning the vehicle has no working ABS or traction control at any time. Performance Jeep of Somerville (Somerville, NJ) inspected the vehicle around September 2023 and confirmed the ABS module had failed. They also confirmed the replacement part was unavailable, with no estimate from Jeep on when it would be supplied, and suggested a possible upcoming national recall—none has been issued. The ABS module has now been on national backorder for roughly two years. Jeep’s parts division states the part is still “supported” but on “heavy backorder.” Jeep/Stellantis corporate opened a case, promised to “fast track” it, and later reported supplier “tooling/manufacturing” issues, offering no timeline for availability despite repeated follow-ups. Please note that Performance Jeep has informed me that they have several aging orders in for the ABS Module (Part 68259556AD) that they're unable to fulfill, so it would appear that on a national basis, there must be many Jeep owners such as myself who are experiencing this problem with no remedy in sight. Because the part cannot be obtained, the vehicle cannot be safely driven or repaired. This is a safety-critical defect with long-term parts unavailability. I am requesting NHTSA review and intervention, as the manufacturer has been unable to supply a federally required safety component, leaving the vehicle in an unsafe condition with no remedy.Read more
Incident date: Oct 1, 2023
The ABS Module (Part 68259556AD) on my 2016 Jeep Wrangler began failing about two years ago. When the ABS warning light turns on, both the ABS and traction-control systems stop functioning, creating a serious safety hazard: greatly increased stopping distance, reduced steering control under braking,
... and higher risk of loss of control on wet or slippery roads. The warnings, once intermittent, are now continuously illuminated, meaning the vehicle has no working ABS or traction control at any time. Performance Jeep of Somerville (Somerville, NJ) inspected the vehicle around September 2023 and confirmed the ABS module had failed. They also confirmed the replacement part was unavailable, with no estimate from Jeep on when it would be supplied, and suggested a possible upcoming national recall—none has been issued. The ABS module has now been on national backorder for roughly two years. Jeep’s parts division states the part is still “supported” but on “heavy backorder.” Jeep/Stellantis corporate opened a case, promised to “fast track” it, and later reported supplier “tooling/manufacturing” issues, offering no timeline for availability despite repeated follow-ups. Please note that Performance Jeep has informed me that they have several aging orders in for the ABS Module (Part 68259556AD) that they're unable to fulfill, so it would appear that on a national basis, there must be many Jeep owners such as myself who are experiencing this problem with no remedy in sight. Because the part cannot be obtained, the vehicle cannot be safely driven or repaired. This is a safety-critical defect with long-term parts unavailability. I am requesting NHTSA review and intervention, as the manufacturer has been unable to supply a federally required safety component, leaving the vehicle in an unsafe condition with no remedy.Read more
Incident date: Nov 29, 2025
I have been waiting on a replacement ABS module for months , was told I could continue to drive the jeep by a jeep dealership, the part is on back order and no plans to put in productions; my shop can see that there is ove500 people waiting on this part that effects the operation of the Safety fea
... tures designed on 11/29 my jeep would stopped abruptly in traffic and would not go forward or reverse just stuck - lucky i was not hit in the rear or causing a major accident, after turning on /off i was able to go 100 yards to get it out of traffic, and needed a tow . sitting at dealership - jeep payment , no jeep and no answers - along with many other people driving jeeps on the road today . -this may of caused other issues to my jeep as well.Read more
Incident date: Nov 29, 2025
I have been waiting on a replacement ABS module for months , was told I could continue to drive the jeep by a jeep dealership, the part is on back order and no plans to put in productions; my shop can see that there is ove500 people waiting on this part that effects the operation of the Safety fea
... tures designed on 11/29 my jeep would stopped abruptly in traffic and would not go forward or reverse just stuck - lucky i was not hit in the rear or causing a major accident, after turning on /off i was able to go 100 yards to get it out of traffic, and needed a tow . sitting at dealership - jeep payment , no jeep and no answers - along with many other people driving jeeps on the road today . -this may of caused other issues to my jeep as well.Read more
Incident date: Dec 1, 2025
ABS module faulty with none available to have fixed under warranty. I was told to drive it anyway.
Incident date: Nov 29, 2025
I have been waiting on a replacement ABS module for months , was told I could continue to drive the jeep by a jeep dealership, the part is on back order and no plans to put in productions; my shop can see that there is ove500 people waiting on this part that effects the operation of the Safety fea
... tures designed on 11/29 my jeep would stopped abruptly in traffic and would not go forward or reverse just stuck - lucky i was not hit in the rear or causing a major accident, after turning on /off i was able to go 100 yards to get it out of traffic, and needed a tow . sitting at dealership - jeep payment , no jeep and no answers - along with many other people driving jeeps on the road today . -this may of caused other issues to my jeep as well.Read more
Incident date: Sep 13, 2025
My ABS Control module has failed. The Jeep has been in the shop now for 75 days with no MOPAR part delivery known as of 11/28/25. I have had 4 ABS wheel sensors go bad and not the module is bad. The vehicle surges, will not accelerate, etc.
Incident date: Nov 1, 2025
ABS module started to fail about a year ago but was only recently identified (within the last two weeks). ABS module listed for back order with more than 500 orders ahead of mine within Jeep dealership system. Order placed outside of dealership via Mopar website but listed as shipping next month (16
... -28 December).Read more
Incident date: Nov 1, 2025
The contact owns a 2016 Jeep Wrangler. The contact recently replaced the windshield wiper motor due to a failure of the intermittent speed settings not functioning properly. The contact stated that after replacing the wiper motor, the contact was only able to use the wipers on the fast speed setting
... . An independent mechanic informed the contact that the vehicle was taken to the shop for repair, or he could replace the wiper blade switch on the steering column. The contact repaired the vehicle himself. The contact stated that after the repair was completed, while driving out of the driveway at approximately 2 MPH, the driver's side front air bag deployed. The contact followed the instructions to install the wiper blade switch carefully. The contact was still only able to use the wipers on the fast speed setting. The vehicle was not repaired. The manufacturer was not informed of the failure. The failure mileage was 132,552.Read more
Incident date: Nov 1, 2025
The contact owns a 2016 Jeep Wrangler. The contact recently replaced the windshield wiper motor due to a failure of the intermittent speed settings not functioning properly. The contact stated that after replacing the wiper motor, the contact was only able to use the wipers on the fast speed setting
... . An independent mechanic informed the contact that the vehicle was taken to the shop for repair, or he could replace the wiper blade switch on the steering column. The contact repaired the vehicle himself. The contact stated that after the repair was completed, while driving out of the driveway at approximately 2 MPH, the driver's side front air bag deployed. The contact followed the instructions to install the wiper blade switch carefully. The contact was still only able to use the wipers on the fast speed setting. The vehicle was not repaired. The manufacturer was not informed of the failure. The failure mileage was 132,552.Read more
Incident date: Apr 15, 2025
Oil holder thing had to be replaced twice within a few months for the part leaving oil onto the engine.
Incident date: Oct 9, 2025
The ABS Module has failed causing the stabiltrak , brake light , and ABS lights to come on the dash. We took it to the dealer and evidently this is a common issue with the jeep wranglers and dodge rams.. So much that the part is back ordered and there is no eta. Some people have been waiting over a
... year. They say it’s under engineering review. Anyway My Wife was driving the other day and someone had pulled out in front of her and she hit the brakes real hard and it made a weird noise and the brakes locked up. Almost causing her to swerve and lose control. I have the service report that says ABS module and backed ordered with no eta.. I have heard other peoples jeeps just going over to broke mode and can only drive 30 mph. It’s crazy? What are we the consumer supposed to do. Can’t afford to trade it in for another vehicle. But need a vehicle for work or keep driving it and hope brakes or something else doesn’t fail when you need it… Thank YouRead more
Incident date: Feb 14, 2023
My ABS module has been out/faulty for more than two years. I have been unable to get a repair/replacement part due to national back orders. Chrysler has been no help at all. I believe this is a safety issue that Chrysler isnt taking serious.
Incident date: Jul 1, 2025
The abs module has gone bad at less then 70,000 miles the dealership confirmed this. There are lights advising of the abs and traction control light on and I no longer have anti lock breaks or traction control.
Incident date: Oct 11, 2025
our Abs control module is firing out an internal error code. Mopar has the unit on back order. It has been on back order for more than a year. To get a used one costs 5 times more than a new one. This is a huge problem for people when it comes to safe driving.
Incident date: Sep 2, 2025
My 2016 Jeep Wrangler is displaying warning lights (Brake, ABS, Traction Control) on the dashboard. I took it to my Jeep dealership where they diagnosed the issue as an inoperative ABS Module part number 68259556AD. They placed it on order but it was back ordered with no available delivery date. My
... Jeep is now not able to be driven.Read more
Incident date: Aug 1, 2025
Jeep Wrangler Unlimited ABS, Brake, & Traction Control warning lights all came on at once while driving. Once jeep stopped vehicle went into limp mode limiting power and MPH to less than 30 MPH. Which is a huge safety problem when all the roads to and from out house are 45 MPH. ABS Module is bad per
... the dealer. Vehicle is VOR in the system, and undriveable. No estimate when a new part will arrive.Read more
Showing 50 of 619 complaints.
NHTSA Safety Investigations — JEEP WRANGLER
Investigations opened by NHTSA into potential safety defects. These are separate from recalls and may or may not result in a recall.
PE — Open
— Model Year: 2020
Instrument Panel Cluster (IPC) Failure
The Office of Defects Investigations (ODI) is opening a Preliminary Evaluation on 2020 Model Year Jeep Gladiators and Wranglers involving a malfunctioning Instrument Panel Clusters (IPC) resulting in the loss of important vehicle metrics and other status information. ODI has received 89 Vehicle
... Owner Questionnaires (VOQs) alleging a complete or partial loss of the IPC display while driving.  The subject vehicles' IPC display includes the speedometer, fuel gauge, engine temperature, turn signal indicators, warning light, and other gauges that are normally illuminated while the vehicle is in operation. Loss of the fuel gauge while driving may lead to an inability to determine the fuel level and result in a loss of motive power, and the loss of other safety-related information may impede a driverâs ability to take action to prevent a safety risk.  Furthermore, an IPC that is suddenly not visible to the driver may divert the driverâs attention from the driving task, potentially causing a vehicle crash. ODI is opening this Preliminary Evaluation to evaluate the scope, severity and frequency of the alleged IPC malfunctions and to assess potential safety-related consequences. To review the ODI reports cited in the Opening Resume ODI Report Identification Number document, go to NHTSA.govRead more
RQ — Open
— Model Year: 2024
Loss of Motive Power
The Office of Defects Investigation (ODI) has identified 68 Vehicle Owner Questionnaire (VOQ) reports for model years (MY) 2021 through 2024 Jeep Wrangler 4xe vehicles alleging a loss of motive power. Recall 22V-865 was issued by the manufacturer to address an engine shutdown condition in certain MY
... 2021-2023 Wrangler 4xe vehicles. The complaints noted here contain both post recall remedy failures and failures in vehicles not included within the scope of 22V-865. An analysis comparing complaints received before the issuance of recall 22V-865 and complaints outside the scope of the recall has been conducted. The results show the current complaint rate is higher in the out of scope vehicles than it was for vehicles that were later covered by the recall. ODI is opening this Recall Query (RQ) to assess the severity of the alleged defect in vehicles not included in recall 22V-865.ODI will also assess the scope and remedy effectiveness of the recall. To review the ODI reports cited in the Opening Resume ODI Report Identification Number document, go to NHTSA.gov.Read more
PE — Closed
— Model Year: 2019
Frame weld deficiencies
On September 16, 2019, the Office of Defects Investigation (ODI) granted Defect Petition DP18-004 and opened Preliminary Evaluation PE19-012 to investigate allegations of deficient frame welds and their potential safety related effects on 2018-2019 Jeep Wranglers. Due to a previous steering related
... recall that was caused by a misaligned weld on the front track bar (NHTSA Recall No. 18V-675), ODI decided to include reports of steering shimmy or wobble, loose steering, and steering stiction (loss of power steering) as part of this investigation and parent petition (DP18-004). ODI received information from the vehicle manufacturer Fiat Chrysler Automobiles (FCA) via information request letters dated March 8, 2019, and February 6, 2020. Supplemental requests for information occurred between July 2020 and July 2023. A review of the responsive manufacturer information showed that vehicles presenting an unexpected reduction in steering ability due to a welding tool misalignment were correctly addressed via recall 18V-675. General complaints concerning the weld appearance were not associated with a realized risk to motor vehicle safety. ODI identified a limited number of reports involving weld separation on vehicles that were out of scope of recall 18V-675. FCA identified various causes of weld quality issues in early production (build dates prior to March 2018) including improper welding techniques on galvanized frames and component part variation leading to off-seam welds. These issues were addressed in production for subject vehicles built after July 2018 and preceded a drop in weld failure reports. ODI reviewed manufacturer and agency reports of weld failures out of scope of recall 18V-675 and did not find any that resulted in a loss of vehicle control. There are no known crashes, injuries, or fatalities as a result of weld failures on vehicles not included in recall 18V-675. Due to the steering related consequence associated with Recall 18V-675, ODI opted to include a request for information regarding various steering issues experienced by vehicles included in this investigation. ODI reviewed manufacturer as well as agency data and determined these various steering issues were not related to any weld defect. Since the opening of this investigation, FCA has addressed the following steering concerns; a. Steering looseness due to material choice in the steering box internal components. FCA released an updated part with an internal component material less sensitive to temperature variances (TSB 08-003-21 REV. A).NHTSA will take further investigative action if justified. b. Steering wobble or shimmy due to a manufacturing and design deficiency in the steering damper. FCA released a part via Customer Satisfaction Notification (CSN) V41 in June 2019 which implemented supplier quality control improvements and design changes due to the presence of air in the base valve which degraded damping performance.NHTSA will take further investigative action if justified. c. Steering stiction, or loss of power steering, due to an underpowered steering pump calibration that occurred at highway speeds during cold weather. In December 2021, FCA released CSN Y95 which corrected this issue via software update. Due to the decreased number of consumer complaints, the service campaign appears to have addressed the issue related to an underpowered steering pump. NHTSA will take further investigative action if justified. The closing of this investigation does not constitute a finding by NHTSA that a safety-related defect does not exist. The Agency reserves the right to take additional action if warranted by future circumstances. To review the ODI reports cited in the Closing Resume ODI Report Identification Number document, go to NHTSA.gov.Read more
PE — Closed
— Model Year: 2015
Seat belt buckle bracket failure
On July 17, 2019, NHTSA's Office of Defects Investigation (ODI) opened Preliminary Evaluation (PE) 19-008 after receiving three Vehicle Owner Questionnaire (VOQ) reports alleging the driver's side seat belt buckle separated from the seat frame, rendering the seat belt non-functional. The VOQs involv
... ed model year (MY) 2015 and 2016 Jeep Wrangler (JK platform) that were configured for right-hand drive (RHD) use. On August 8, 2019, ODI issued an information request (IR) letter to FCA.The scope of the IR included all JK Wrangler produced for sale in the U.S. (both left- and right-hand drive), and amongst other things, requested any reports or allegations of driver's seat belt bracket failures on these vehicles. In its review of FCA's response, ODI determined that approximately 1.7 million JK Wrangler were produced from MY 2007 to 2018, about 16,000 of which were configured for RHD. ODI notes that the RHD Wrangler are typically used for rural postal delivery which often experience a more severe duty cycle. Also RHD JK was was not produced in MY 2007.As explained in the IR response, FCA identified three distinct populations of JK Wrangler concerning the driver's seat belt bucket bracket; specifically the MY 2007-2018 LHD (~1.7M units), the MY 2008-2010 RHD (4,563 units), and the MY 2011-2018 RHD (11,463 units) populations.FCA provided details on the designs used in each of these populations, identifying specific differences deemed pertinent to the strength and durability of each unique bracket design. FCA further reviewed its analysis of the complaint and warranty data identified under the IR, and noting that it had not identified any allegations of bracket failures on the LHD population, and only one allegation on the MY 2008-2010 RHD vehicles. By comparison, FCA identified 24 allegations of bracket failure for the MY 2011-2018 RHD JK, including two reports duplicative of the VOQs. Neither the FCA nor the VOQ reports allege an injury or fatality due to bracket failure. Based on this analysis, FCA decided to conduct a safety recall for the MY 2011-2018 RHD JK population. On September 30, 2019, FCA submitted a Defect Information Report initiating NHTSA Safety Recall 19V-680 (FCA No. VA6). Under the recall action, FCA will replace the driver's seat belt bracket on MY 2011-2018 RHD Jeep JK Wrangler. The repair will be conducted free of charge.In view of FCA's recall action, and its explanations of the scope of that action, ODI is closing PE19-008. ODI will continue to monitor the non-recalled RHD, and the LHD JK Wrangler for evidence of seat belt bracket failure and will take further action if warranted.The three VOQ reports cited above can be reviewed at NHTSA.gov under the following reference numbers:11190251, 11218472, 11231639.Read more
DP — Closed
— Model Year: 2019
Frame Weld Deficiencies
In a letter received on October 24, 2018, a citizen petitioned the National Highway Traffic Safety Administration (NHTSA) to initiate a safety defect investigation into frame weld deficiencies on model year (MY) 2018 'JL' Jeep Wrangler vehicles. The petitioner described a broad list of frame weld de
... ficiencies, including porous welds, excessive slag, lack of weld penetration, over penetration of welds, overweld or weld drip, and weld splash. The weld defects are allegedly located at a variety of locations on the frame assembly.On November 16, 2018, the Office of Defects Investigation (ODI) opened a Defect Petition (DP18-004) to evaluate whether to grant or deny the petition. On March 8, 2019, ODI sent an Information Request letter to Fiat Chrysler Automobiles (FCA) requesting information on frame weld related issues on all MY 2018-2019 Jeep Wrangler 'JL' vehicles. Due to a previous steering related recall that was caused by a misaligned weld on the front track bar (NHTSA Recall No. 18V-675), ODI opted to include a request for additional information concerning reports of steering shimmy or wobble, loose steering, and steering lockup in the March request letter. ODI has performed a preliminary analysis on the information obtained from FCA. Based on ODI's review of the applicable materials, NHTSA has decided to grant the petition. While reviewing the applicable materials obtained from the manufacturer, ODI identified various reports and references to frame welded component detachments that were outside of the scope of NHTSA Recall No. 18V-675. Additionally, the information that FCA provided did not adequately address whether frame weld quality deficiencies compromise the structural integrity of vehicles, and therefore may pose an unreasonable risk to motor vehicle safety. Finally, ODI needs to further evaluate the alleged steering-related defects reported through MY 2019 and the alleged defects' relation to weld quality.The petition was granted on September 16, 2019. Preliminary Evaluation PE19-012 has been opened to further assess the scope, frequency, and potential safety-related consequences of alleged weld quality deficiencies and steering related concerns on the MY 2018-2019 'JL' Jeep Wrangler vehicles.The ODI reports cited above can be viewed on NHTSA.gov under the following reference numbers:11234967, 11222390, 11219370, 11217080, 1204905, 11179954, 11171786, 11161243, 11155523, 11153044, 11143617, 11142722, 11142426, 11141336, 11141035, 11140637, 11140344, 11140262, 11140085, 11140057, 11139880, 11139866, 11139557, 11139467, 11139436, 11138974, 11138758, 11138757, 11132030, 11129738, 11129667, 11124312, 11120232, 11119676, 11119650, 11119454, 11119450, 11115658, 11115137, 11113029, 11112515, 11110583, 11109903, 11093172, 11088501, 11076098Read more
EA — Closed
— Model Year: 2008
Air Bag Clockspring Wiring Failure
On May 10, 2016, Fiat Chrysler America (FCA) submitted a Part 573 Defect Information Report announcing NHTSA recall 16V290 involving 394,258 model year (MY) 2007-2010 Jeep Wrangler vehicles.Under the recall FCA will replace the clockspring and install a steering wheel back cover and steering wheel c
... olumn shroud.This recall also includes approx. 4,524 MY2007-2010 right hand drive (RHD) Jeep Wrangler vehicles commonly used for rural postal delivery services.In addition 7,180 MY 2011-2016 right hand drive Jeep Wrangler vehicles were also recalled under 16V288, the same remedy repair will be used.Upon review of the 1,942 MY 2007-2010 Jeep Wrangler consumer complaints, 17,195 warranty reports and field returned parts assessment, FCA concluded that a defect exists in the driver side clockspring assembly, a device that both connects (electrically) the driver air bag to the control module and allows rotational movement between the steering wheel and fixed steering column.Clockspring failure may compromise the air bag circuit causing illumination of the air bag warning lamp, and may result in non-deployment of the driver air bag in a frontal crash.FCA identified a contributing factor in that the recalled vehicles may be subjected to off-road dusty environments and/or usage with the vehicle roof top/doors removed thus allowing dust and moisture to enter the clockspring assembly.FCA advised that the MY 2011 and later Wrangler vehicles had an improved steering column cover/shroud that may reduce the amount of dirt/moisture that can enter the clockspring assembly.During the investigation FCA and the Office of Defects Investigation (ODI) also reviewed 193 MY 2011-2012 Jeep Wrangler consumer complaints, 3,918 warranty reports and field returned parts along with reports from other FCA vehicles that use the same clockspring assembly.Based on this review, the rate of repair and the failure mode does not indicate a defect trend at this time in the later MY Wrangler or other FCA vehicles.During the field return parts review, FCA found a significant number of MY 2011-2012 Wrangler returned parts that operated normally, the so called ?no trouble found? or NTF parts where no fault could be identified through bench testing.On June 10, 2016, FCA informed ODI of its intention to conduct a 15-yr, 150k mile extended warranty program due to the NTF issue and the MY 2011 and later vehicles having a somewhat elevated level of warranty replacement.Consumers will be notified of the program in writing.FCA will collect clocksprings replaced under the warranty extension program to further examine and study the root cause failure.ODI will monitor FCA?s analysis to determine if any further field action is warranted.Based on the actions taken by FCA to recall the MY 2007-2010 Jeep Wrangler vehicles and the MY 2008-2016 right hand drive Wrangler vehicles, this investigation is closed.FCA has also agreed to conduct a warranty extension and further evaluation of the MY 2011-2016 Wrangler.At the time of FCA's field data submission in PE 15-025 (September 2015), ODI was aware of a total of 416 MY 2007-2010 and 23 MY 2011-2012 VOQs relevant to this issue.In addition, there have been an additional 90 and 16 VOQs (respectively) received since the recall announcement (i.e., thru May 2016).The reports noted above can be viewed at SaferCar.gov under the reference (ODI) numbers cited on the attached listing.Read more
PE — Closed
— Model Year: 2007
Air Bag Clockspring Wiring Failure
In it's response to ODI's PE15-025 Information Request letter, FCA identified 1,703 consumer complaints, field reports and legal claims responsive to the subject defect condition on the subject Wrangler vehicles.Six of these reports alleged an air bag non-deployment in a crash in which either the ai
... r bag warning light was allegedly on or came on afterward the crash, one of which also alleged injuries as a result of the non-deployment.FCA also provided data on other make, model and model year vehicles using the same clockspring.Additionally FCA provided 16,955 warranty claims related to the replacement of the air bag clockspring wiring assembly.It should be noted that FCA initiated an Extended Warranty Program on the left hand drive MY 2007 Wrangler in late calendar year 2011.6,777 of these claims are from the MY 2007 left hand drive Wrangler.FCA advises that some of the warranty claims involved clockspring failures that would not affect the air bag operation, for example due to noise, cruise control and/or radio operation issues.Many of these claims involved newer model year subject vehicles.FCA also noted that Wrangler's removable roof and door configuration may make it more susceptible to outdoor water/moisture and dust ingress.ODI investigated the right hand drive Wrangler in calender year 2011 for a similar clockspring issue under PE11-019.That investigation lead to NHTSA Safety Recall 11V258 on right hand drive model year (MY) 2008-2012 Wranglers.FCA redesigned the remedy clockspring to improve its durability and environmental protection and revised the design of the steering wheel to column shroud.Base on the data reviewed, this Preliminary Analysis (PE) is being upgraded to an Engineering Analysis (EA).The reports cited above are listed in the public investigative file available at SaferCar.gov under this investigation ID.Read more
PE — Closed
— Model Year: 2010
Skid plate debris fires
In a letter dated May 15, 2012, the Chrysler Group LLC (Chrysler) submitted a Defect Information Report to NHTSA identifying a safety defect regarding fires originating between the transmission skid plate and the exhaust catalyst in approximately 65,246 model year (MY) 2010 Jeep Wrangler 4x4 vehicle
... s with automatic transmissions (NHTSA Recall 12V-216).According to Chrysler, changes to the exhaust system for MY 2010 resulted in reduced clearances between the exhaust catalyst and the skid plate.If debris collects in the area of the skid plate and is not removed, there is an increased potential for underbody debris fires.ODI's analysis of skid plate area fires in the MY 2010 Wrangler vehicles with automatic transmissions found that the rate increased significantly from approximately 1.7 fires per 100,000 vehicle years in the MY 2007 through 2009 vehicles with the prior exhaust design to approximately 14.8 fires per 100,000 vehicle years in MY 2010 vehicles, a nearly 800 percent increase.In analysis of both Vehicle Owner Questionnaire (VOQ) data submitted to the Office of Defects Investigation (ODI) and Chrysler's consumer complaint data submitted to ODI, 35 unique reports were identified by Chrysler alleging fire in subject vehicles with origins near the engine compartment or in the underbody area directly beneath and to the rear of the engine compartment.Chrysler's assessments of the 35 reports of fire were categorized by likely causes.Eleven of the fires were determined to be caused by skid plate debris accumulation and 4 additional fires were found to have originated in the area of the skid plate, but debris ignition could not be confirmed.An additional skid plate debris fire was reported to ODI after the recall announcement, bringing the total known fire count to 36, including 12 caused by skid plate debris and 4 originating in the skid plate area from unknown causes.Chrysler identified a design change to the exhaust system in MY 2010 that increased the possibility of debris contact with an exhaust catalyst.Beginning in MY 2011, the skid plate was replaced with a skid bar for weight reduction purposes.The skid bar having a much smaller surface area than the skid plate reduces the potential for debris entrapment.The recall remedy for recall 12V-216 will involve replacement of the skid plate with the skid bar.As background, the MY 2010 subject vehicles are a part of the JK generation of Jeep Wrangler vehicles that began production in MY 2007.Chrysler conducted a prior recall (09V-436) of MY 2007 and 2008 Jeep Wranglers for a defect involving overheated transmission fluid expulsion that could contact the exhaust and cause an engine compartment fire.The recall remedy was to add audible (chime) and visual warnings (hot oil message in the instrument cluster) to alert the driver that the vehicle was being operated with elevated transmission fluid temperatures.Chrysler enhanced the audible warning with a service campaign (J31) for MY 2009 and a portion of the subject MY 2010 vehicles.Transmission fluid expulsion has not been identified as the cause of any of the 36 fire incidents in the subject vehicles. No indications of a common causal pattern were evident in the remaining 20 fire incidents in the subject vehicles.Six (6) of the incidents appear to be related to improper wiring of various added aftermarket equipment, 2 appear to be related to improper oil change, 1 was related to a damaged transfer case, 1 was related to an electrical short circuit and the remaining 10 were of unknown origin.Accordingly, this Preliminary Evaluation is closed.The ODI reports cited above can be reviewed at www-odi.Read more
PE — Closed
— Model Year: 2006
CLUTCH LINKAGE FAILURE
ON MAY 2, 2006 DAIMLERCHRYSLER CORPORATION (DCC) SUBMITTED TO THE NATIONAL HIGHWAY TRAFFIC SAFETY ADMINISTRATION (NHTSA) A PART 573 REPORT ADVISING THAT CERTAIN MODEL YEAR 2006 JEEP WRANGLER VEHICLES WOULD BE VOLUNTARILY REC ALLED TO REPLACE A DEFECTIVE CLUTCH LINKAGE COMPONENT.THE RECALL ACTION IS
... IDENTIFIED BY NHTSA NO. 06V147 (DCC NO. F22).THE LINKAGE ROD BETWEEN THE CLUTCH PEDAL AND CLUTCH MASTER CYLINDER CAN BREAK WHEN THE CLUTCH PEDAL IS DEPRESSED; LINKAGE ROD FAILURE UNDER THESE CONDITIONS RESULTS IN IMMEDIATE ENGAGEMENT OF THE CLUTCH AND RENDERS THE CLUTCH PEDAL INEFFECTIVE THEREAFTER .THE 6,876 MANUAL TRANSMISSION VEHICLES INCLUDED IN THE RECALL ACTION WERE ALL MANUFACTURED BETWEEN 11/3/2005 AND 2/13/2006.DCC WILL REPLACE THE DEFECTIVE LINKAGE WITH A COMPONENT OF A PREVIOUS DESIGN LEVEL WHICH HAS NOT EXPERIENCED FIELD FAILURE.THE TIMING OF DCC'S ACTION HAS NOT BEEN DETERMINED.ACCORDINGLY, THIS PRELIMINARY EVALUATION IS CLOSED.Read more
EA — Closed
— Model Year: 1994
PARKING BRAKE RESULTING IN ROLLAWAY
There is no summary currently available
PE — Closed
— Model Year: 1994
PARKING BRAKE
ALLEGED THE THE PARKING BRAKE FAIL TO HOLD THE VEHICLE STATIONARY WHEN APPLIED, AND THE VEHICLE ROLLED AWAY
PE — Closed
— Model Year: 2000
AIR BAG MODULE DETACHMENT
ODI HAS RECEIVED A COMMPLAINT STATING THAT THE DRIVER-SIDE FRONTAL AIR BAG MODULE DETACHED FROM THE STEERING WHEEL WHILE ATTEMPTION TO USE THE HORN FOR THE FIRST TIME IN A BRAND NEW MODEL YEAR 2000 JEEP WRANGLE (PURCHASED I LATE MARCH 2000).THE AIR BAG MODULE FELL OFF THE STEERING WHEEL AND WAS HANG
... ING BY ITS WIRES.THE REPAIRING DELERSHIP STATED THAT THE TWO MOUNTING SCREWS, HOLDING THE INTEGTATED HORN/AIR BAG MODULE TO THE STEERING WHEEL, WERE MISSING.THIS INVESTIGATIONN IS OPENED TO DETERMINE THE SCOPE OF THE POTENTIAL PROBLEM OF MIS-ASSEMBLED AIR BAG MODULES IN TH EJEEP WRANGLE VEHICLES.Read more
RQ — Closed
— Model Year: 1999
INSTRUMENT PANEL GROUND SCREW
THE INSTRUMENT PANEL WIRING GROUND ATTACHMENT SCREWS CAN LOOSEN
RQ — Closed
— Model Year: 1992
FUEL LEAKAGE
ODI HAS RECEIVED 6 REPORTS ON FUEL LEAKAGE AND 3 REPORTS ON ALLEGED REMEDY FAILURE REPORTS
PE — Closed
— Model Year: 1990
SEAT BACK FAILURE
There is no summary currently available
EA — Closed
— Model Year: 1987
SEAT BELT BUCKLE FAILURE
There is no summary currently available
PE — Closed
— Model Year: 1988
SEAT BELT BUCKLE FAILURE
There is no summary currently available
EA — Closed
— Model Year: 1988
SENDING UNIT GASKET FAILS
There is no summary currently available
EA — Closed
— Model Year: 1989
DRIVESHAFT/UNIV.JOINT FAIL
There is no summary currently available
PE — Closed
— Model Year: 1990
SENDING UNIT GASKET FAILS
There is no summary currently available
PE — Closed
— Model Year: 1992
FUEL LINE LEAKAGE
There is no summary currently available
PE — Closed
— Model Year: 1988
EXHAUST SYSTEM FIRES
There is no summary currently available
EA — Closed
— Model Year: 1989
FUEL TANK/EXHAUST INTERFER
There is no summary currently available
PE — Closed
— Model Year: 1987
FUEL TANK/EXHAUST INTERFER
There is no summary currently available
PE — Closed
— Model Year: 1985
SAFETY BELT RETRACTOR
===
PE — Closed
— Model Year: 1987
WINDSHIELD WIPER FAILURE
There is no summary currently available