SEAT BELTS:FRONT:ANCHORAGE
Defect Description
Chrysler (FCA US LLC) is recalling certain 2011-2018 Jeep Wrangler right hand drive vehicles. The driver's seat belt buckle mounting strap may fracture and separate from the seat frame.
Consequence
A separated or severed seat belt buckle strap will result in an inoperable seat belt, increasing the risk of injury in the event of a crash.
Remedy
FCA US will notify owners, and dealers will replace the driver's seat belt buckle, free of charge. Interim notices informing owners of the safety risk were mailed November 19, 2019. Owners will received a second letter and the recall began March 26, 2020. Owners may contact FCA customer service a
... t 1-800-853-1403. FCA's number for this recall is VA6.Read more11,463 vehicles affected
Manufacturer: Chrysler (FCA US LLC)
AIR BAGS:FRONTAL:PASSENGER SIDE:INFLATOR MODULE
Defect Description
Chrysler (FCA US LLC) is recalling certain 2010 Dodge Ram 3500, Ram 4500/5500, 2010-2011 Dodge Dakota, 2010-2014 Dodge Challenger, 2010-2015 Dodge Challenger, Chrysler 300, and 2010-2016 Jeep Wrangler vehicles. Upon deployment of the driver's frontal air bag, excessive internal pressure may cause t
... he inflator to explode.Read moreConsequence
In the event of a crash necessitating deployment of the passenger's frontal air bag, the inflator could explode with metal fragments striking the vehicle occupants potentially resulting in serious injury or death.
Remedy
Owners are advised not to drive their vehicle until the recall repair is complete. Chrysler will notify owners, and dealers will replace the passenger frontal air bag inflator, free of charge. The recall began February 4, 2019. Owners may contact Chrysler customer service at 1-800-853-1403. Chry
... sler's number for this recall is V01.Read more1,413,222 vehicles affected
Manufacturer: Chrysler (FCA US LLC)
AIR BAGS:FRONTAL:DRIVER SIDE:INFLATOR MODULE
Defect Description
Chrysler (FCA US LLC) is recalling certain model year 2011-2016 Right Hand Drive Jeep Wrangler vehicles manufactured February 16, 2010, to May 2, 2016. The clockspring assembly may become contaminated with dust and cause the air bag circuit to fail.
Consequence
Failure of the air bag circuit may prevent the driver's frontal air bag from deploying in the event of a crash, increasing the risk of injury.
Remedy
Chrysler will notify owners, and dealers will replace the clockspring, wheel back cover, and column shroud, free of charge. The recall began on August 11, 2016. Owners may contact Chrysler customer service at 1-800-853-1403. Chrysler's number for this recall is S40.
7,196 vehicles affected
Manufacturer: Chrysler (FCA US LLC)
TIRES:PRESSURE MONITORING AND REGULATING SYSTEMS
Defect Description
Chrysler Group LLC (Chrysler) is recalling certain model year 2014 Chrysler Town and Country and Dodge Grand Caravan vehicles manufactured March 20, 2014, to April 22, 2014, and 2014 Jeep Wrangler vehicles manufactured March 21, 2014, to April 22, 2014. Due to a software error, the Tire Pressure Mo
... nitoring System (TPMS) may fail to learn the locations of the individual sensors while the vehicle is being driven. As a result, the low tire pressure warning light will illuminate, despite the the tire pressures being within specification. Should one of the tires lose air pressure, the driver would not be notified of the change in air pressure. As such, these vehicles fail to comply with the requirements of Federal Motor Vehicle Safety Standard No. 138, "Tire Pressure Monitoring Systems."Read moreConsequence
If the TPMS light illuminates because the sensors cannot be located, it could mask an actual low tire pressure condition, possibly resulting in tire failure, increasing the risk of a crash.
Remedy
Chrysler has notified owners, and dealers will reprogram the TPMS module, free of charge. The recall began on October 23, 2014. Owners may contact Chrysler customer service at 1-800-853-1403. Chrysler's number for this recall is P63.
10,390 vehicles affected
Manufacturer: Chrysler Group LLC
Complaint Statistics
831 total complaints
32 crashes 36 fires 20 injuries
Top Reported Components
| Component | Complaints |
|---|
| ENGINE | 321 |
| POWER TRAIN | 86 |
| ELECTRICAL SYSTEM | 77 |
| AIR BAGS | 69 |
| SERVICE BRAKES | 50 |
| UNKNOWN OR OTHER | 48 |
| STEERING | 26 |
| FUEL/PROPULSION SYSTEM | 19 |
| VEHICLE SPEED CONTROL | 18 |
| STRUCTURE:BODY | 17 |
Incident date: Mar 1, 2025
The contact owns a 2014 Jeep Wrangler. The contact stated that the vehicle was difficult to stop. The traction control and cruise control features were inoperable. The parking brake, traction control, and ABS warning lights were illuminated. The vehicle was taken to an independent mechanic who deter
... mined the failure was caused by the ABS control module. An unknown local dealer was contacted, but the vehicle was not diagnosed or repaired. The manufacturer was contacted and opened a case. The approximate failure mileage was 161,000.Read more
Incident date: Mar 1, 2025
The contact owns a 2014 Jeep Wrangler. The contact stated that the vehicle was difficult to stop. The traction control and cruise control features were inoperable. The parking brake, traction control, and ABS warning lights were illuminated. The vehicle was taken to an independent mechanic who deter
... mined the failure was caused by the ABS control module. An unknown local dealer was contacted, but the vehicle was not diagnosed or repaired. The manufacturer was contacted and opened a case. The approximate failure mileage was 161,000.Read more
Incident date: Jan 12, 2026
Death wobble. Dealership that has it now (Campbell Chevorlet in Bowing green ky) knows and fails to fix or report it.
Incident date: Jan 12, 2026
Death wobble. Dealership that has it now (Campbell Chevorlet in Bowing green ky) knows and fails to fix or report it.
Incident date: Jan 12, 2026
Death wobble. Dealership that has it now (Campbell Chevorlet in Bowing green ky) knows and fails to fix or report it.
Incident date: Jan 13, 2026
ABS Module component has failed which controls anti-lock brakes, cruise control and traction control. Jeep has no stock of ABS Modules, and no production dates for potential fix. Therefore these Jeeps have reverted a decade or two in safety losing their ABS, traction control and going into limp
... mode, which prevents you from driving (I have not experienced limp mode but neither do I wish for this to happen.)Read more
Incident date: Mar 9, 2026
2014 Jeep Wrangler ABS module failure, part number 68145835AE Dash light for ABS and Brake warning light are constant on the dash. This is the 2nd 2014 Jeep Wrangler I have owned that has this problem. It has been diagnosed by the Jeep dealer and another mechanic. The part is on National back ord
... er. I ordered the first one in 2024 and it has not been available. I have done a bunch of research and believe a CHIP in the module fails but is no longer available. My Jeep is available for inspection.Read more
Incident date: Dec 2, 2025
The vehicle has been virtually trouble-free for many years. Recently, it began to have some issues. The vehicle is covered under a lifetime warranty from Chrysler and has been serviced by the local Jeep dealer. We brought the vehicle in to service in November, 2025. One of the issues that had just o
... ccurred was that the brake warning lights came on. The dealer said they were not able to replace the AntiLock Brake module because they were backordered. They said the vehicle would be safe to drive. We waited a month and still no part. I reached out to the manufacturer, and they said the part was not in stock and I would be notified when they would be able to send it to the dealer. It is no about 5 months later and still no part. The part(s) show as available from the Manufacturer online, however they continue to say there are none available for our vehicle. The Dealer service department said this is not unique to us, that it is a constant problem for them to get this part from the manufacturer. We need the vehicle for transportation and are worried that the defective part may lead to brake failure and an accident.Read more
Incident date: Mar 2, 2026
FCA is not handling this recall professionally. Dealerships are stating they do not handle the towing, despite this being a DO NOT DRIVE recall that has resulted in deaths. FCA has used a call center that employs people who barely speak English. Lack of ability to communicate with the customer and d
... ealership staff should disqualify someone from serving in this capacity. The service department at my local dealership seems to be suggesting I just drive the vehicle down, which contradicts the DO NOT DRIVE portion of this recall. I do not believe FCA is acting in good faith to perform these recalls in a safe manner for the customer.Read more
Incident date: Feb 27, 2026
ABS pump is faulty, part is unavailable to purchase for years not safe when roads are icy or wet
Incident date: Oct 3, 2025
My ABS module failed, which is a very well know issue with the 2014 to 2018 models. When the ABS module failed I was driving the vehicle and it went into fail safe mode while I was on the freeway service road. The speedometer stopped working and the vehicle would not go over about 20 mph. The vehicl
... e was fine one minute and then I had no control of how fast I was going. I was with traffic that was going 60 mph and it could have been extremely dangerous for me or other drivers. The vehicle has been at the dealership since October 3rd, 2025 and has not been drivable due to this issue. It has not been inspected by anyone other than the dealership. There were warning lights but I was told that it was fine to drive until the part was available. It is currently on a national backorder for the last 18+ months without an estimated arrival date. The failure first appeared in June of 2024 and the part has been on backorder since then.Read more
Incident date: Oct 3, 2025
My ABS module failed, which is a very well know issue with the 2014 to 2018 models. When the ABS module failed I was driving the vehicle and it went into fail safe mode while I was on the freeway service road. The speedometer stopped working and the vehicle would not go over about 20 mph. The vehicl
... e was fine one minute and then I had no control of how fast I was going. I was with traffic that was going 60 mph and it could have been extremely dangerous for me or other drivers. The vehicle has been at the dealership since October 3rd, 2025 and has not been drivable due to this issue. It has not been inspected by anyone other than the dealership. There were warning lights but I was told that it was fine to drive until the part was available. It is currently on a national backorder for the last 18+ months without an estimated arrival date. The failure first appeared in June of 2024 and the part has been on backorder since then.Read more
Incident date: Oct 3, 2025
My ABS module failed, which is a very well know issue with the 2014 to 2018 models. When the ABS module failed I was driving the vehicle and it went into fail safe mode while I was on the freeway service road. The speedometer stopped working and the vehicle would not go over about 20 mph. The vehicl
... e was fine one minute and then I had no control of how fast I was going. I was with traffic that was going 60 mph and it could have been extremely dangerous for me or other drivers. The vehicle has been at the dealership since October 3rd, 2025 and has not been drivable due to this issue. It has not been inspected by anyone other than the dealership. There were warning lights but I was told that it was fine to drive until the part was available. It is currently on a national backorder for the last 18+ months without an estimated arrival date. The failure first appeared in June of 2024 and the part has been on backorder since then.Read more
Incident date: Mar 7, 2025
ABS module failure. Can’t even buy parts as they are unavailable. Jeep should be liable for this. If ABS prevents dangerous situations and the module is failed, they should be liable.
Incident date: Feb 10, 2026
OIL HOUSING FAILED , CAUSED OIL INTO ENGINE AND EXHAUST
Incident date: May 1, 2025
The ABS Control module has been out on my vehicle since May 2025. Which is when the part was ordered by my dealership through MOPAR as the part is only sold through MOPAR directly. This part cannot be replaced through third party and requires a MOPAR agent to scan to the vehicle. This has been a sys
... temic issue where it has been referred to as a “galactic back order” In the cars manual from Jeep when there are issues with the ABS control module it lists this as a critical safety issues and to take it directly to a dealership for service. When this issue is present it disables Electronic stability control (ESC), Anti locking braking system (ABS), Descent assist control, and cruise control. This increases safety issues especially when driving on slick winter or wet roadways. I wonder how many other people had an issue like this and contributed to an accident? When an inquiry is submitted to find out more about this issue from the order it’s going to be sent out on x date then x date comes and it gets pushed back now it’s y date then z. per stelantis this part is under their “engineer review” and now it’s unknown when they will release this part.Read more
Incident date: Nov 1, 2025
The contact owns a 2014 Jeep Wrangler. The contact stated that while driving at an undisclosed speed, the seat belt, parking brake, and ABS warning lights illuminated. The vehicle was taken to an independent mechanic and the dealer, who determined that the ABS module had failed and needed to be repl
... aced; however, the part was on backorder. The vehicle was not repaired. The manufacturer was not made aware of the failure. The failure mileage was approximately 84,000.Read more
Incident date: Jul 2, 2025
The ABS module was determined to be faulty via a code scan in July 2025 by the dealership. I took the vehicle to another mechanic for confirmation and this was determined to be accurate. A new module has been ordered but is on backorder and may not become available for months as many other owners ar
... e dealing with the same problem. I was told that it was still drivable and this is a daily driver vehicle. This now appears to be causing the vehicle to go into "limp" mode, not allowing the vehicle to accelerate at times when pulling into traffic.Read more
Incident date: Dec 1, 2025
ABS Module Failure. No fix or replacement part available. No recall, no Anti- lock brakes ,no traction control , disables cruise control , no solution available per Jeep ?
Incident date: Dec 1, 2025
ABS Module Failure. No fix or replacement part available. No recall, no Anti- lock brakes ,no traction control , disables cruise control , no solution available per Jeep ?
Incident date: Dec 1, 2025
ABS Module Failure. No fix or replacement part available. No recall, no Anti- lock brakes ,no traction control , disables cruise control , no solution available per Jeep ?
Incident date: May 1, 2022
I own a 2014 Jeep Wrangler, Rubicon. I have not been able to drive my Jeep for 3 years because the ABS light is on and I am unable to get the part to replace it. I have heard from several other Jeep owners that they are experiencing the same ABS failure. The ABS light has been on since 2022 and the
... re are no MOPAR ABS replacement parts. I would like to officially report this failure because I have not been able to resolve this issue. I have taken my Jeep to several mechanics and they cannot repair this issue because their are no parts available.Read more
Incident date: Oct 23, 2025
I was driving on I35 on 10/23/2025 when I saw a small spark then my vehicle caught fire and i exited the vehicle called 911 Lewisville Fire Department and was informed that they responded to vehicle fire on 10/23/2025 at 9:45 pm, their case number is 2025-0012175. The representative stated that th
... e Lewisville Police Dept. also completed a report, case number 250068809.Read more
Fire
Incident date: Oct 23, 2025
I was driving on I35 on 10/23/2025 when I saw a small spark then my vehicle caught fire and i exited the vehicle called 911 Lewisville Fire Department and was informed that they responded to vehicle fire on 10/23/2025 at 9:45 pm, their case number is 2025-0012175. The representative stated that th
... e Lewisville Police Dept. also completed a report, case number 250068809.Read more
Fire
Incident date: Oct 23, 2025
I was driving on I35 on 10/23/2025 when I saw a small spark then my vehicle caught fire and i exited the vehicle called 911 Lewisville Fire Department and was informed that they responded to vehicle fire on 10/23/2025 at 9:45 pm, their case number is 2025-0012175. The representative stated that th
... e Lewisville Police Dept. also completed a report, case number 250068809.Read more
Fire
Incident date: Dec 10, 2025
The contact owns a 2014 Jeep Wrangler. The contact stated that while the vehicle was parked on a driveway on two occasions, the contact noticed that the vehicle was leaking oil onto the ground. The vehicle was towed to Seaside Park Service Center, where it was diagnosed with an oil filter housing fa
... ilure. The contact was advised that it was a common failure. The mechanic recommended replacing the oil filter housing with another model. The vehicle was not yet repaired. The mechanic referred the contact to the NHTSA Hotline to file a safety complaint. The manufacturer was not notified of the failure. The failure mileage was approximately 68,000. The VIN was unavailable.Read more
Incident date: Jun 1, 2024
ABS module failed and the Jeep began violently shaking on the freeway. There is a significant risk of the brakes locking up which put myself and the general public at risk. A dealer confirmed however there are no parts to buy from Stellantis/Mopar. They are on an "indefinite backorder". Even getting
... them rebuilt is impossible because they are unable to get the parts. ABS, brake, and traction control all came on when the module failed and the death rattle started. This has left me with a dangerous and almost completely useless vehicle for over a year with no resolution in sight. This is a public emergency with so many vehicles that this is happening to and we need a resolution.Read more
Incident date: Nov 14, 2025
I had Gresham 4 Wheel drive do several repairs on my 2014 Jeep Wrangler and the same day I drove it back home I experience death wobble which put me at risk by having me to stop at a highway to be able to control my vehicle which was extremely dangerous for me and other drivers. I have talked to the
... manager but he isn’t willing to have my vehicle towed to the shop and now I haven’t been able to drive my vehicle for a month now and have now lost hope of getting my vehicle fixed and safe to drive.Read more
Incident date: Feb 11, 2025
ABS MODULE FAILING IN 1000'S OF VECHILES AND JEEP HAS NO SOLUTION TO ANY CUSTOMERS. NO PARTS ARE AVAILABLE WORLD WIDE. LEAVING PEOPLE STRANDED IN REMOTE PLACES UNABLE TO USE A EXPENSIVE VECHILE. ABS MODULE FAILS AND THEN YOUR VECHIL IS STUCK IN GEAR WILL NOT CHANGE GEARS IN THE TRANSMISSION, SPEED
... O FAILS AND VECHILE SITTING ON BICKS FOR YEARS UNTIL SOME TIME A PART BECOMES AVAILABLE IN A SCRAPYARD.Read more
Incident date: Feb 11, 2025
ABS MODULE FAILING IN 1000'S OF VECHILES AND JEEP HAS NO SOLUTION TO ANY CUSTOMERS. NO PARTS ARE AVAILABLE WORLD WIDE. LEAVING PEOPLE STRANDED IN REMOTE PLACES UNABLE TO USE A EXPENSIVE VECHILE. ABS MODULE FAILS AND THEN YOUR VECHIL IS STUCK IN GEAR WILL NOT CHANGE GEARS IN THE TRANSMISSION, SPEED
... O FAILS AND VECHILE SITTING ON BICKS FOR YEARS UNTIL SOME TIME A PART BECOMES AVAILABLE IN A SCRAPYARD.Read more
Incident date: Feb 11, 2025
ABS MODULE FAILING IN 1000'S OF VECHILES AND JEEP HAS NO SOLUTION TO ANY CUSTOMERS. NO PARTS ARE AVAILABLE WORLD WIDE. LEAVING PEOPLE STRANDED IN REMOTE PLACES UNABLE TO USE A EXPENSIVE VECHILE. ABS MODULE FAILS AND THEN YOUR VECHIL IS STUCK IN GEAR WILL NOT CHANGE GEARS IN THE TRANSMISSION, SPEED
... O FAILS AND VECHILE SITTING ON BICKS FOR YEARS UNTIL SOME TIME A PART BECOMES AVAILABLE IN A SCRAPYARD.Read more
Incident date: Apr 20, 2024
I had repairs done to my Jeep in April 2024. At that time, I was made aware that my ABS control module was faulty and no longer functioning. I have been periodically checking with my mechanic and online to check the status of this part, only to find that it has been an ongoing issue with some models
... having this part unavailable since 2019. At the end of October 2025, I began having a major safety issue in which my Jeep's engine will shut off without warning and the only reason I will be aware is because the wheel will no longer turn easily (trying to turn without power steering). In addition, there will at times be a fluctuation of power either having a an extreme spike or drop in RPMs causing the Jeep to lurch while driving. The cruise control cannot be used with this issue, and I have also experienced malfunctions in the traction control (i.e. hydroplaning in a very small puddle in the road that a normal car could handle, let alone a Jeep). I have been waiting patiently for a year and a half and there are no updates available for Jeep owners, and the issues caused by this lack of parts could cause fatalities on the road or leave individuals with a very expensive, undrivable vehicle followed by the additional cost of purchasing a new vehicle. This is unacceptable for an extremely large and popular vehicle manufacturer to be unable to come to an agreement with parts manufacturers to resume production of a crucial vehicle part.Read more
Incident date: Apr 20, 2024
I had repairs done to my Jeep in April 2024. At that time, I was made aware that my ABS control module was faulty and no longer functioning. I have been periodically checking with my mechanic and online to check the status of this part, only to find that it has been an ongoing issue with some models
... having this part unavailable since 2019. At the end of October 2025, I began having a major safety issue in which my Jeep's engine will shut off without warning and the only reason I will be aware is because the wheel will no longer turn easily (trying to turn without power steering). In addition, there will at times be a fluctuation of power either having a an extreme spike or drop in RPMs causing the Jeep to lurch while driving. The cruise control cannot be used with this issue, and I have also experienced malfunctions in the traction control (i.e. hydroplaning in a very small puddle in the road that a normal car could handle, let alone a Jeep). I have been waiting patiently for a year and a half and there are no updates available for Jeep owners, and the issues caused by this lack of parts could cause fatalities on the road or leave individuals with a very expensive, undrivable vehicle followed by the additional cost of purchasing a new vehicle. This is unacceptable for an extremely large and popular vehicle manufacturer to be unable to come to an agreement with parts manufacturers to resume production of a crucial vehicle part.Read more
Incident date: Apr 20, 2024
I had repairs done to my Jeep in April 2024. At that time, I was made aware that my ABS control module was faulty and no longer functioning. I have been periodically checking with my mechanic and online to check the status of this part, only to find that it has been an ongoing issue with some models
... having this part unavailable since 2019. At the end of October 2025, I began having a major safety issue in which my Jeep's engine will shut off without warning and the only reason I will be aware is because the wheel will no longer turn easily (trying to turn without power steering). In addition, there will at times be a fluctuation of power either having a an extreme spike or drop in RPMs causing the Jeep to lurch while driving. The cruise control cannot be used with this issue, and I have also experienced malfunctions in the traction control (i.e. hydroplaning in a very small puddle in the road that a normal car could handle, let alone a Jeep). I have been waiting patiently for a year and a half and there are no updates available for Jeep owners, and the issues caused by this lack of parts could cause fatalities on the road or leave individuals with a very expensive, undrivable vehicle followed by the additional cost of purchasing a new vehicle. This is unacceptable for an extremely large and popular vehicle manufacturer to be unable to come to an agreement with parts manufacturers to resume production of a crucial vehicle part.Read more
Incident date: Aug 17, 2024
Anti-Lock Braking System Pump #68259556AD failure leaving the vehicle immobilized, dealership/manufacturer have NOT had replacement for over 3 YEARS now, many Mopar cars are suffering from this safety issue of not having ABS, and not having a solution for this problem
Incident date: Aug 17, 2024
Anti-Lock Braking System Pump #68259556AD failure leaving the vehicle immobilized, dealership/manufacturer have NOT had replacement for over 3 YEARS now, many Mopar cars are suffering from this safety issue of not having ABS, and not having a solution for this problem
Incident date: Apr 1, 2025
The ABS light on my instrument panel has been going off for Since April 2025. I have attempted to order a replacement ABS Control Module, but Stallantis keeps canceling the order with no reason provided. This appears to be a long ongoing problem, and others have reported waiting years for a replac
... ement. I have also heard reports that Stallantis is no longer making the part. I understand that NHTSA has forced a recall on other Jeep/Ram ABS Control Modules, so I'm not sure why one has not been placed on the Jeep JK series.Read more
Incident date: Apr 1, 2025
The ABS light on my instrument panel has been going off for Since April 2025. I have attempted to order a replacement ABS Control Module, but Stallantis keeps canceling the order with no reason provided. This appears to be a long ongoing problem, and others have reported waiting years for a replac
... ement. I have also heard reports that Stallantis is no longer making the part. I understand that NHTSA has forced a recall on other Jeep/Ram ABS Control Modules, so I'm not sure why one has not been placed on the Jeep JK series.Read more
Incident date: May 26, 2023
Starting in approximately mid 2023 the vehicle began to leak oil. This was noted once the vehicle was parked after driving. There were various amounts of oil pooled underneath the oil filter housing on the ground. At this time it had approximately 70,000 miles. I had to consistently add many quarts
... of oil to keep the vehicle operating while going to several mechanics to diagnose the problem. There are many instances where a strong burning smell comes from the engine compartment especially when traveling at higher speeds (highway driving). It was determined that the oil filter housing had cracked and was the source of the oil leak. The cost for repair was approximately $800 for labor and the part, having to spend additional money to get a rental car. The mechanics stated that they have had to replace this same part on many other Jeep Wranglers that are the same make/year. The mechanic did say that another jeep that had the same problem did catch on fire due to the oil running down through the heated engine as this part is made of plastic and situated on the top side of the engine. My Jeep is current on all maintenance and there has been no accident to cause this part to crack. I was made aware that previous models had metal housing, as opposed to plastic hence there not being an issue. By the time we figured out the source of the leak, it was no longer under warranty, so I had the work completed by a local mechanic instead of the dealer. No warnings, not even a low oil pressure or check engine light came on. It was the burning smell and oil loss that made me aware of an issue. Once again, at approximately 100,000 miles it has happened again. The mechanic I originally brought it to is out of business, but the part would be out of warranty regardless. Now I am stuck spending another approximately 1,000 to have it replaced again, with the same part that will inevitably crack again. They really need to recall and replace this part with a metal housing.Read more
Incident date: Sep 10, 2025
ABS sensor has failed at 35,000 miles and has left me without antilock brakes which impairs the braking ability of my vehicle in emergency situations. This needs to be issued as a recall.
Incident date: Sep 10, 2025
ABS sensor has failed at 35,000 miles and has left me without antilock brakes which impairs the braking ability of my vehicle in emergency situations. This needs to be issued as a recall.
Incident date: Jul 11, 2023
The ABS module on my vehicle is faulty. Jeep is no longer manufacturing the part needed for repair. My vehicle is drivable but no longer has ABS. This is affecting a very large number of Jeep wranglers and stallantis / Jeep refuses to make a replacement part available or issue a recall.
Incident date: May 3, 2025
While driving in town the red warning lights came on (Traction control, abs lights) Vehicle would not shift when trying to accelerate, speedometer not working along with a few other issues. Mechanic said abs module needs to be replaced. Then he informed me that the part is not available for purchase
... and not being manufactured anymore. I now have a vehicle that is useless and not safe to drive. This is unacceptable customer service. Very disappointed in Jeep for not addressing this problem or offering an alternative solution. I can not afford to buy another car.Read more
Incident date: May 3, 2025
While driving in town the red warning lights came on (Traction control, abs lights) Vehicle would not shift when trying to accelerate, speedometer not working along with a few other issues. Mechanic said abs module needs to be replaced. Then he informed me that the part is not available for purchase
... and not being manufactured anymore. I now have a vehicle that is useless and not safe to drive. This is unacceptable customer service. Very disappointed in Jeep for not addressing this problem or offering an alternative solution. I can not afford to buy another car.Read more
Incident date: Sep 2, 2025
The engine in my 2014 Jeep Wrangler Unlimited (3.6L Pentastar V6) suddenly seized without warning at approx. 154,525 miles. The vehicle stalled while in motion, causing immediate loss of power and creating a dangerous situation where I could have been struck by other traffic. This was a major safety
... hazard. The Jeep was towed to a dealership, where technicians confirmed the engine is seized and provided a written estimate of about $12,000 for full engine replacement. I later had the vehicle towed back to my home, but the failed engine remains in the vehicle and is available for inspection upon request. The problem has been reproduced and confirmed by the authorized Jeep service center. Jeep/Stellantis Customer Care has also been contacted, and a case has been opened.Decline goodwill assistance. There were no warning lamps, messages, or prior symptoms before the failure. The vehicle was operating normally until the sudden stall. This lack of warning combined with the engine seizure placed my safety and the safety of others at risk. I believe this issue is part of a known defect pattern with the 3.6L Pentastar engine, which has been subject to numerous complaints, service bulletins, and litigation. A well-maintained Jeep engine should not fail catastrophically at this mileage without warning.Read more
Incident date: Nov 22, 2023
I am writing to formally lodge a complaint regarding the ongoing issue with the ABS control module in my vehicle. For the past two years, this component has been faulty, leaving me without ABS functionality, traction control, and proper braking performance. As a result, I have experienced several da
... ngerous situations in which my vehicle was nearly involved in accidents due to these safety deficiencies. Despite my efforts to resolve the matter, I have been unable to obtain the replacement part. I have contacted multiple dealerships, suppliers, and even Mopar directly, yet I have been given no estimated timeframe for delivery. I currently have the part on order, fully paid for, and after two years there is still no indication of when or if it will become available. This situation has created serious safety concerns for both myself and other motorists. Furthermore, I am unable to trade in or properly service my vehicle due to this unresolved issue. I find this unacceptable and believe it demonstrates a significant failure in both product support and customer service. I respectfully request immediate action to resolve this matter, whether through expedited access to the replacement part, an alternative solution, or other appropriate corrective measures. My priority is ensuring my vehicle is safe to operate, and I urge you to address this situation without further delay.Read more
Incident date: Nov 22, 2023
I am writing to formally lodge a complaint regarding the ongoing issue with the ABS control module in my vehicle. For the past two years, this component has been faulty, leaving me without ABS functionality, traction control, and proper braking performance. As a result, I have experienced several da
... ngerous situations in which my vehicle was nearly involved in accidents due to these safety deficiencies. Despite my efforts to resolve the matter, I have been unable to obtain the replacement part. I have contacted multiple dealerships, suppliers, and even Mopar directly, yet I have been given no estimated timeframe for delivery. I currently have the part on order, fully paid for, and after two years there is still no indication of when or if it will become available. This situation has created serious safety concerns for both myself and other motorists. Furthermore, I am unable to trade in or properly service my vehicle due to this unresolved issue. I find this unacceptable and believe it demonstrates a significant failure in both product support and customer service. I respectfully request immediate action to resolve this matter, whether through expedited access to the replacement part, an alternative solution, or other appropriate corrective measures. My priority is ensuring my vehicle is safe to operate, and I urge you to address this situation without further delay.Read more
Incident date: Nov 22, 2023
I am writing to formally lodge a complaint regarding the ongoing issue with the ABS control module in my vehicle. For the past two years, this component has been faulty, leaving me without ABS functionality, traction control, and proper braking performance. As a result, I have experienced several da
... ngerous situations in which my vehicle was nearly involved in accidents due to these safety deficiencies. Despite my efforts to resolve the matter, I have been unable to obtain the replacement part. I have contacted multiple dealerships, suppliers, and even Mopar directly, yet I have been given no estimated timeframe for delivery. I currently have the part on order, fully paid for, and after two years there is still no indication of when or if it will become available. This situation has created serious safety concerns for both myself and other motorists. Furthermore, I am unable to trade in or properly service my vehicle due to this unresolved issue. I find this unacceptable and believe it demonstrates a significant failure in both product support and customer service. I respectfully request immediate action to resolve this matter, whether through expedited access to the replacement part, an alternative solution, or other appropriate corrective measures. My priority is ensuring my vehicle is safe to operate, and I urge you to address this situation without further delay.Read more
Incident date: Aug 13, 2025
Defective abs module causing safety issues like calipers sticking, very common issue on these models dealers don’t repair
Incident date: Dec 20, 2023
The contact owns a 2014 Jeep Wrangler. The contact stated that while stopped at a red light, the accelerator pedal was depressed; however, the vehicle failed to accelerate as intended. The contact's vehicle was rear-ended. The contact's wife, who was the other occupant of the vehicle, was taken to t
... he hospital in a private vehicle. The contact's wife sustained a dislocated left hip. In addition, the contact's wife had previously had a left hip replacement and undergone four left hip surgeries. The vehicle was driven to the contact's residence. A police report was filed; however the information was unavailable. The contact stated that three months after the vehicle was purchased, the ABS, traction control, and several unknown warning lights illuminated. The vehicle was taken to the dealer, where it was diagnosed with a failed ABS module. The contact was informed that the ABS module needed to be replaced. The vehicle was not repaired. The contact was informed that the parts were on back order. The contact stated that the order was placed almost thirteen months ago. The contact stated that the vehicle was almost rear-ended two times recently. The manufacturer was made aware of the failure but provided no assistance. The contact was advised to contact the NHTSA Hotline and report the failure. The failure mileage was approximately 110,000.Read more
Crash
1 injured
Showing 50 of 831 complaints.
NHTSA Safety Investigations — JEEP WRANGLER
Investigations opened by NHTSA into potential safety defects. These are separate from recalls and may or may not result in a recall.
PE — Open
— Model Year: 2020
Instrument Panel Cluster (IPC) Failure
The Office of Defects Investigations (ODI) is opening a Preliminary Evaluation on 2020 Model Year Jeep Gladiators and Wranglers involving a malfunctioning Instrument Panel Clusters (IPC) resulting in the loss of important vehicle metrics and other status information. ODI has received 89 Vehicle
... Owner Questionnaires (VOQs) alleging a complete or partial loss of the IPC display while driving.  The subject vehicles' IPC display includes the speedometer, fuel gauge, engine temperature, turn signal indicators, warning light, and other gauges that are normally illuminated while the vehicle is in operation. Loss of the fuel gauge while driving may lead to an inability to determine the fuel level and result in a loss of motive power, and the loss of other safety-related information may impede a driverâs ability to take action to prevent a safety risk.  Furthermore, an IPC that is suddenly not visible to the driver may divert the driverâs attention from the driving task, potentially causing a vehicle crash. ODI is opening this Preliminary Evaluation to evaluate the scope, severity and frequency of the alleged IPC malfunctions and to assess potential safety-related consequences. To review the ODI reports cited in the Opening Resume ODI Report Identification Number document, go to NHTSA.govRead more
RQ — Open
— Model Year: 2024
Loss of Motive Power
The Office of Defects Investigation (ODI) has identified 68 Vehicle Owner Questionnaire (VOQ) reports for model years (MY) 2021 through 2024 Jeep Wrangler 4xe vehicles alleging a loss of motive power. Recall 22V-865 was issued by the manufacturer to address an engine shutdown condition in certain MY
... 2021-2023 Wrangler 4xe vehicles. The complaints noted here contain both post recall remedy failures and failures in vehicles not included within the scope of 22V-865. An analysis comparing complaints received before the issuance of recall 22V-865 and complaints outside the scope of the recall has been conducted. The results show the current complaint rate is higher in the out of scope vehicles than it was for vehicles that were later covered by the recall. ODI is opening this Recall Query (RQ) to assess the severity of the alleged defect in vehicles not included in recall 22V-865.ODI will also assess the scope and remedy effectiveness of the recall. To review the ODI reports cited in the Opening Resume ODI Report Identification Number document, go to NHTSA.gov.Read more
PE — Closed
— Model Year: 2019
Frame weld deficiencies
On September 16, 2019, the Office of Defects Investigation (ODI) granted Defect Petition DP18-004 and opened Preliminary Evaluation PE19-012 to investigate allegations of deficient frame welds and their potential safety related effects on 2018-2019 Jeep Wranglers. Due to a previous steering related
... recall that was caused by a misaligned weld on the front track bar (NHTSA Recall No. 18V-675), ODI decided to include reports of steering shimmy or wobble, loose steering, and steering stiction (loss of power steering) as part of this investigation and parent petition (DP18-004). ODI received information from the vehicle manufacturer Fiat Chrysler Automobiles (FCA) via information request letters dated March 8, 2019, and February 6, 2020. Supplemental requests for information occurred between July 2020 and July 2023. A review of the responsive manufacturer information showed that vehicles presenting an unexpected reduction in steering ability due to a welding tool misalignment were correctly addressed via recall 18V-675. General complaints concerning the weld appearance were not associated with a realized risk to motor vehicle safety. ODI identified a limited number of reports involving weld separation on vehicles that were out of scope of recall 18V-675. FCA identified various causes of weld quality issues in early production (build dates prior to March 2018) including improper welding techniques on galvanized frames and component part variation leading to off-seam welds. These issues were addressed in production for subject vehicles built after July 2018 and preceded a drop in weld failure reports. ODI reviewed manufacturer and agency reports of weld failures out of scope of recall 18V-675 and did not find any that resulted in a loss of vehicle control. There are no known crashes, injuries, or fatalities as a result of weld failures on vehicles not included in recall 18V-675. Due to the steering related consequence associated with Recall 18V-675, ODI opted to include a request for information regarding various steering issues experienced by vehicles included in this investigation. ODI reviewed manufacturer as well as agency data and determined these various steering issues were not related to any weld defect. Since the opening of this investigation, FCA has addressed the following steering concerns; a. Steering looseness due to material choice in the steering box internal components. FCA released an updated part with an internal component material less sensitive to temperature variances (TSB 08-003-21 REV. A).NHTSA will take further investigative action if justified. b. Steering wobble or shimmy due to a manufacturing and design deficiency in the steering damper. FCA released a part via Customer Satisfaction Notification (CSN) V41 in June 2019 which implemented supplier quality control improvements and design changes due to the presence of air in the base valve which degraded damping performance.NHTSA will take further investigative action if justified. c. Steering stiction, or loss of power steering, due to an underpowered steering pump calibration that occurred at highway speeds during cold weather. In December 2021, FCA released CSN Y95 which corrected this issue via software update. Due to the decreased number of consumer complaints, the service campaign appears to have addressed the issue related to an underpowered steering pump. NHTSA will take further investigative action if justified. The closing of this investigation does not constitute a finding by NHTSA that a safety-related defect does not exist. The Agency reserves the right to take additional action if warranted by future circumstances. To review the ODI reports cited in the Closing Resume ODI Report Identification Number document, go to NHTSA.gov.Read more
PE — Closed
— Model Year: 2015
Seat belt buckle bracket failure
On July 17, 2019, NHTSA's Office of Defects Investigation (ODI) opened Preliminary Evaluation (PE) 19-008 after receiving three Vehicle Owner Questionnaire (VOQ) reports alleging the driver's side seat belt buckle separated from the seat frame, rendering the seat belt non-functional. The VOQs involv
... ed model year (MY) 2015 and 2016 Jeep Wrangler (JK platform) that were configured for right-hand drive (RHD) use. On August 8, 2019, ODI issued an information request (IR) letter to FCA.The scope of the IR included all JK Wrangler produced for sale in the U.S. (both left- and right-hand drive), and amongst other things, requested any reports or allegations of driver's seat belt bracket failures on these vehicles. In its review of FCA's response, ODI determined that approximately 1.7 million JK Wrangler were produced from MY 2007 to 2018, about 16,000 of which were configured for RHD. ODI notes that the RHD Wrangler are typically used for rural postal delivery which often experience a more severe duty cycle. Also RHD JK was was not produced in MY 2007.As explained in the IR response, FCA identified three distinct populations of JK Wrangler concerning the driver's seat belt bucket bracket; specifically the MY 2007-2018 LHD (~1.7M units), the MY 2008-2010 RHD (4,563 units), and the MY 2011-2018 RHD (11,463 units) populations.FCA provided details on the designs used in each of these populations, identifying specific differences deemed pertinent to the strength and durability of each unique bracket design. FCA further reviewed its analysis of the complaint and warranty data identified under the IR, and noting that it had not identified any allegations of bracket failures on the LHD population, and only one allegation on the MY 2008-2010 RHD vehicles. By comparison, FCA identified 24 allegations of bracket failure for the MY 2011-2018 RHD JK, including two reports duplicative of the VOQs. Neither the FCA nor the VOQ reports allege an injury or fatality due to bracket failure. Based on this analysis, FCA decided to conduct a safety recall for the MY 2011-2018 RHD JK population. On September 30, 2019, FCA submitted a Defect Information Report initiating NHTSA Safety Recall 19V-680 (FCA No. VA6). Under the recall action, FCA will replace the driver's seat belt bracket on MY 2011-2018 RHD Jeep JK Wrangler. The repair will be conducted free of charge.In view of FCA's recall action, and its explanations of the scope of that action, ODI is closing PE19-008. ODI will continue to monitor the non-recalled RHD, and the LHD JK Wrangler for evidence of seat belt bracket failure and will take further action if warranted.The three VOQ reports cited above can be reviewed at NHTSA.gov under the following reference numbers:11190251, 11218472, 11231639.Read more
DP — Closed
— Model Year: 2019
Frame Weld Deficiencies
In a letter received on October 24, 2018, a citizen petitioned the National Highway Traffic Safety Administration (NHTSA) to initiate a safety defect investigation into frame weld deficiencies on model year (MY) 2018 'JL' Jeep Wrangler vehicles. The petitioner described a broad list of frame weld de
... ficiencies, including porous welds, excessive slag, lack of weld penetration, over penetration of welds, overweld or weld drip, and weld splash. The weld defects are allegedly located at a variety of locations on the frame assembly.On November 16, 2018, the Office of Defects Investigation (ODI) opened a Defect Petition (DP18-004) to evaluate whether to grant or deny the petition. On March 8, 2019, ODI sent an Information Request letter to Fiat Chrysler Automobiles (FCA) requesting information on frame weld related issues on all MY 2018-2019 Jeep Wrangler 'JL' vehicles. Due to a previous steering related recall that was caused by a misaligned weld on the front track bar (NHTSA Recall No. 18V-675), ODI opted to include a request for additional information concerning reports of steering shimmy or wobble, loose steering, and steering lockup in the March request letter. ODI has performed a preliminary analysis on the information obtained from FCA. Based on ODI's review of the applicable materials, NHTSA has decided to grant the petition. While reviewing the applicable materials obtained from the manufacturer, ODI identified various reports and references to frame welded component detachments that were outside of the scope of NHTSA Recall No. 18V-675. Additionally, the information that FCA provided did not adequately address whether frame weld quality deficiencies compromise the structural integrity of vehicles, and therefore may pose an unreasonable risk to motor vehicle safety. Finally, ODI needs to further evaluate the alleged steering-related defects reported through MY 2019 and the alleged defects' relation to weld quality.The petition was granted on September 16, 2019. Preliminary Evaluation PE19-012 has been opened to further assess the scope, frequency, and potential safety-related consequences of alleged weld quality deficiencies and steering related concerns on the MY 2018-2019 'JL' Jeep Wrangler vehicles.The ODI reports cited above can be viewed on NHTSA.gov under the following reference numbers:11234967, 11222390, 11219370, 11217080, 1204905, 11179954, 11171786, 11161243, 11155523, 11153044, 11143617, 11142722, 11142426, 11141336, 11141035, 11140637, 11140344, 11140262, 11140085, 11140057, 11139880, 11139866, 11139557, 11139467, 11139436, 11138974, 11138758, 11138757, 11132030, 11129738, 11129667, 11124312, 11120232, 11119676, 11119650, 11119454, 11119450, 11115658, 11115137, 11113029, 11112515, 11110583, 11109903, 11093172, 11088501, 11076098Read more
EA — Closed
— Model Year: 2008
Air Bag Clockspring Wiring Failure
On May 10, 2016, Fiat Chrysler America (FCA) submitted a Part 573 Defect Information Report announcing NHTSA recall 16V290 involving 394,258 model year (MY) 2007-2010 Jeep Wrangler vehicles.Under the recall FCA will replace the clockspring and install a steering wheel back cover and steering wheel c
... olumn shroud.This recall also includes approx. 4,524 MY2007-2010 right hand drive (RHD) Jeep Wrangler vehicles commonly used for rural postal delivery services.In addition 7,180 MY 2011-2016 right hand drive Jeep Wrangler vehicles were also recalled under 16V288, the same remedy repair will be used.Upon review of the 1,942 MY 2007-2010 Jeep Wrangler consumer complaints, 17,195 warranty reports and field returned parts assessment, FCA concluded that a defect exists in the driver side clockspring assembly, a device that both connects (electrically) the driver air bag to the control module and allows rotational movement between the steering wheel and fixed steering column.Clockspring failure may compromise the air bag circuit causing illumination of the air bag warning lamp, and may result in non-deployment of the driver air bag in a frontal crash.FCA identified a contributing factor in that the recalled vehicles may be subjected to off-road dusty environments and/or usage with the vehicle roof top/doors removed thus allowing dust and moisture to enter the clockspring assembly.FCA advised that the MY 2011 and later Wrangler vehicles had an improved steering column cover/shroud that may reduce the amount of dirt/moisture that can enter the clockspring assembly.During the investigation FCA and the Office of Defects Investigation (ODI) also reviewed 193 MY 2011-2012 Jeep Wrangler consumer complaints, 3,918 warranty reports and field returned parts along with reports from other FCA vehicles that use the same clockspring assembly.Based on this review, the rate of repair and the failure mode does not indicate a defect trend at this time in the later MY Wrangler or other FCA vehicles.During the field return parts review, FCA found a significant number of MY 2011-2012 Wrangler returned parts that operated normally, the so called ?no trouble found? or NTF parts where no fault could be identified through bench testing.On June 10, 2016, FCA informed ODI of its intention to conduct a 15-yr, 150k mile extended warranty program due to the NTF issue and the MY 2011 and later vehicles having a somewhat elevated level of warranty replacement.Consumers will be notified of the program in writing.FCA will collect clocksprings replaced under the warranty extension program to further examine and study the root cause failure.ODI will monitor FCA?s analysis to determine if any further field action is warranted.Based on the actions taken by FCA to recall the MY 2007-2010 Jeep Wrangler vehicles and the MY 2008-2016 right hand drive Wrangler vehicles, this investigation is closed.FCA has also agreed to conduct a warranty extension and further evaluation of the MY 2011-2016 Wrangler.At the time of FCA's field data submission in PE 15-025 (September 2015), ODI was aware of a total of 416 MY 2007-2010 and 23 MY 2011-2012 VOQs relevant to this issue.In addition, there have been an additional 90 and 16 VOQs (respectively) received since the recall announcement (i.e., thru May 2016).The reports noted above can be viewed at SaferCar.gov under the reference (ODI) numbers cited on the attached listing.Read more
PE — Closed
— Model Year: 2007
Air Bag Clockspring Wiring Failure
In it's response to ODI's PE15-025 Information Request letter, FCA identified 1,703 consumer complaints, field reports and legal claims responsive to the subject defect condition on the subject Wrangler vehicles.Six of these reports alleged an air bag non-deployment in a crash in which either the ai
... r bag warning light was allegedly on or came on afterward the crash, one of which also alleged injuries as a result of the non-deployment.FCA also provided data on other make, model and model year vehicles using the same clockspring.Additionally FCA provided 16,955 warranty claims related to the replacement of the air bag clockspring wiring assembly.It should be noted that FCA initiated an Extended Warranty Program on the left hand drive MY 2007 Wrangler in late calendar year 2011.6,777 of these claims are from the MY 2007 left hand drive Wrangler.FCA advises that some of the warranty claims involved clockspring failures that would not affect the air bag operation, for example due to noise, cruise control and/or radio operation issues.Many of these claims involved newer model year subject vehicles.FCA also noted that Wrangler's removable roof and door configuration may make it more susceptible to outdoor water/moisture and dust ingress.ODI investigated the right hand drive Wrangler in calender year 2011 for a similar clockspring issue under PE11-019.That investigation lead to NHTSA Safety Recall 11V258 on right hand drive model year (MY) 2008-2012 Wranglers.FCA redesigned the remedy clockspring to improve its durability and environmental protection and revised the design of the steering wheel to column shroud.Base on the data reviewed, this Preliminary Analysis (PE) is being upgraded to an Engineering Analysis (EA).The reports cited above are listed in the public investigative file available at SaferCar.gov under this investigation ID.Read more
PE — Closed
— Model Year: 2010
Skid plate debris fires
In a letter dated May 15, 2012, the Chrysler Group LLC (Chrysler) submitted a Defect Information Report to NHTSA identifying a safety defect regarding fires originating between the transmission skid plate and the exhaust catalyst in approximately 65,246 model year (MY) 2010 Jeep Wrangler 4x4 vehicle
... s with automatic transmissions (NHTSA Recall 12V-216).According to Chrysler, changes to the exhaust system for MY 2010 resulted in reduced clearances between the exhaust catalyst and the skid plate.If debris collects in the area of the skid plate and is not removed, there is an increased potential for underbody debris fires.ODI's analysis of skid plate area fires in the MY 2010 Wrangler vehicles with automatic transmissions found that the rate increased significantly from approximately 1.7 fires per 100,000 vehicle years in the MY 2007 through 2009 vehicles with the prior exhaust design to approximately 14.8 fires per 100,000 vehicle years in MY 2010 vehicles, a nearly 800 percent increase.In analysis of both Vehicle Owner Questionnaire (VOQ) data submitted to the Office of Defects Investigation (ODI) and Chrysler's consumer complaint data submitted to ODI, 35 unique reports were identified by Chrysler alleging fire in subject vehicles with origins near the engine compartment or in the underbody area directly beneath and to the rear of the engine compartment.Chrysler's assessments of the 35 reports of fire were categorized by likely causes.Eleven of the fires were determined to be caused by skid plate debris accumulation and 4 additional fires were found to have originated in the area of the skid plate, but debris ignition could not be confirmed.An additional skid plate debris fire was reported to ODI after the recall announcement, bringing the total known fire count to 36, including 12 caused by skid plate debris and 4 originating in the skid plate area from unknown causes.Chrysler identified a design change to the exhaust system in MY 2010 that increased the possibility of debris contact with an exhaust catalyst.Beginning in MY 2011, the skid plate was replaced with a skid bar for weight reduction purposes.The skid bar having a much smaller surface area than the skid plate reduces the potential for debris entrapment.The recall remedy for recall 12V-216 will involve replacement of the skid plate with the skid bar.As background, the MY 2010 subject vehicles are a part of the JK generation of Jeep Wrangler vehicles that began production in MY 2007.Chrysler conducted a prior recall (09V-436) of MY 2007 and 2008 Jeep Wranglers for a defect involving overheated transmission fluid expulsion that could contact the exhaust and cause an engine compartment fire.The recall remedy was to add audible (chime) and visual warnings (hot oil message in the instrument cluster) to alert the driver that the vehicle was being operated with elevated transmission fluid temperatures.Chrysler enhanced the audible warning with a service campaign (J31) for MY 2009 and a portion of the subject MY 2010 vehicles.Transmission fluid expulsion has not been identified as the cause of any of the 36 fire incidents in the subject vehicles. No indications of a common causal pattern were evident in the remaining 20 fire incidents in the subject vehicles.Six (6) of the incidents appear to be related to improper wiring of various added aftermarket equipment, 2 appear to be related to improper oil change, 1 was related to a damaged transfer case, 1 was related to an electrical short circuit and the remaining 10 were of unknown origin.Accordingly, this Preliminary Evaluation is closed.The ODI reports cited above can be reviewed at www-odi.Read more
PE — Closed
— Model Year: 2006
CLUTCH LINKAGE FAILURE
ON MAY 2, 2006 DAIMLERCHRYSLER CORPORATION (DCC) SUBMITTED TO THE NATIONAL HIGHWAY TRAFFIC SAFETY ADMINISTRATION (NHTSA) A PART 573 REPORT ADVISING THAT CERTAIN MODEL YEAR 2006 JEEP WRANGLER VEHICLES WOULD BE VOLUNTARILY REC ALLED TO REPLACE A DEFECTIVE CLUTCH LINKAGE COMPONENT.THE RECALL ACTION IS
... IDENTIFIED BY NHTSA NO. 06V147 (DCC NO. F22).THE LINKAGE ROD BETWEEN THE CLUTCH PEDAL AND CLUTCH MASTER CYLINDER CAN BREAK WHEN THE CLUTCH PEDAL IS DEPRESSED; LINKAGE ROD FAILURE UNDER THESE CONDITIONS RESULTS IN IMMEDIATE ENGAGEMENT OF THE CLUTCH AND RENDERS THE CLUTCH PEDAL INEFFECTIVE THEREAFTER .THE 6,876 MANUAL TRANSMISSION VEHICLES INCLUDED IN THE RECALL ACTION WERE ALL MANUFACTURED BETWEEN 11/3/2005 AND 2/13/2006.DCC WILL REPLACE THE DEFECTIVE LINKAGE WITH A COMPONENT OF A PREVIOUS DESIGN LEVEL WHICH HAS NOT EXPERIENCED FIELD FAILURE.THE TIMING OF DCC'S ACTION HAS NOT BEEN DETERMINED.ACCORDINGLY, THIS PRELIMINARY EVALUATION IS CLOSED.Read more
EA — Closed
— Model Year: 1994
PARKING BRAKE RESULTING IN ROLLAWAY
There is no summary currently available
PE — Closed
— Model Year: 1994
PARKING BRAKE
ALLEGED THE THE PARKING BRAKE FAIL TO HOLD THE VEHICLE STATIONARY WHEN APPLIED, AND THE VEHICLE ROLLED AWAY
PE — Closed
— Model Year: 2000
AIR BAG MODULE DETACHMENT
ODI HAS RECEIVED A COMMPLAINT STATING THAT THE DRIVER-SIDE FRONTAL AIR BAG MODULE DETACHED FROM THE STEERING WHEEL WHILE ATTEMPTION TO USE THE HORN FOR THE FIRST TIME IN A BRAND NEW MODEL YEAR 2000 JEEP WRANGLE (PURCHASED I LATE MARCH 2000).THE AIR BAG MODULE FELL OFF THE STEERING WHEEL AND WAS HANG
... ING BY ITS WIRES.THE REPAIRING DELERSHIP STATED THAT THE TWO MOUNTING SCREWS, HOLDING THE INTEGTATED HORN/AIR BAG MODULE TO THE STEERING WHEEL, WERE MISSING.THIS INVESTIGATIONN IS OPENED TO DETERMINE THE SCOPE OF THE POTENTIAL PROBLEM OF MIS-ASSEMBLED AIR BAG MODULES IN TH EJEEP WRANGLE VEHICLES.Read more
RQ — Closed
— Model Year: 1999
INSTRUMENT PANEL GROUND SCREW
THE INSTRUMENT PANEL WIRING GROUND ATTACHMENT SCREWS CAN LOOSEN
RQ — Closed
— Model Year: 1992
FUEL LEAKAGE
ODI HAS RECEIVED 6 REPORTS ON FUEL LEAKAGE AND 3 REPORTS ON ALLEGED REMEDY FAILURE REPORTS
PE — Closed
— Model Year: 1990
SEAT BACK FAILURE
There is no summary currently available
EA — Closed
— Model Year: 1987
SEAT BELT BUCKLE FAILURE
There is no summary currently available
PE — Closed
— Model Year: 1988
SEAT BELT BUCKLE FAILURE
There is no summary currently available
EA — Closed
— Model Year: 1988
SENDING UNIT GASKET FAILS
There is no summary currently available
EA — Closed
— Model Year: 1989
DRIVESHAFT/UNIV.JOINT FAIL
There is no summary currently available
PE — Closed
— Model Year: 1990
SENDING UNIT GASKET FAILS
There is no summary currently available
PE — Closed
— Model Year: 1992
FUEL LINE LEAKAGE
There is no summary currently available
PE — Closed
— Model Year: 1988
EXHAUST SYSTEM FIRES
There is no summary currently available
EA — Closed
— Model Year: 1989
FUEL TANK/EXHAUST INTERFER
There is no summary currently available
PE — Closed
— Model Year: 1987
FUEL TANK/EXHAUST INTERFER
There is no summary currently available
PE — Closed
— Model Year: 1985
SAFETY BELT RETRACTOR
===
PE — Closed
— Model Year: 1987
WINDSHIELD WIPER FAILURE
There is no summary currently available