2025 RAM 2500

6 recalls, 103 complaints

POWER TRAIN:AUTOMATIC TRANSMISSION:CONTROL MODULE (TCM/PCM/TECM)

Defect Description

Chryser (FCA US LLC) is recalling certain 2023-2026 Ram 2500 Pick up trucks. A software error in the powertrain control module may improperly allow the vehicle speed to exceed the tire speed rating, which can result in a loss of vehicle control.

Consequence

Loss of vehicle control increases the risk of a crash.

Remedy

Dealers will update the powertrain control module software, free of charge. Owner notification letters were mailed May 21, 2026. Owners may contact FCA customer service at 1-800-853-1403. FCA's number for this recall is 43D. Vehicle Identification Numbers (VINs) involved in this recall will become s... Read more

12,736 vehicles affected

Manufacturer: Chrysler (FCA US, LLC)

ELECTRICAL SYSTEM: INSTRUMENT CLUSTER/PANEL

Defect Description

Chrysler (FCA US, LLC) is recalling certain 2025-2026 Ram 1500 Pickup, Ram 2500 Pickup, Ram 3500 Pickup, Ram 3500 Cab Chassis, Ram 4500 Cab Chassis, and Ram 5500 Cab Chassis vehicles. A software error may cause the instrument panel display to fail. As such, these vehicles fail to comply with the req... Read more

Consequence

An instrument panel display that fails to show critical safety information, such as gear selection and warning lights, increases the risk of a crash.

Remedy

Dealers will update the instrument panel software, free of charge. Owner notification letters were mailed May 5, 2026. Owners may contact FCA customer service at 1-800-853-1403. FCA's number for this recall is 35D. Vehicle Identification Numbers (VINs) involved in this recall will become searchable ... Read more

65,348 vehicles affected

Manufacturer: Chrysler (FCA US, LLC)

ELECTRICAL SYSTEM: INTEGRATED TRAILER BRAKE CONTROL

Defect Description

Chrysler (FCA US, LLC) is recalling certain 2024-2026 Jeep Wagoneer S, 2025-2026 Ram 1500 Pickup, Ram 2500 Pickup, Ram 3500 Pickup, Ram 3500 Cab Chassis, Ram 4500 Cab Chassis, Ram 5500 Cab Chassis, and 2026 Jeep Cherokee vehicles. Due to an improperly designed trailer tow module, the trailer lights ... Read more

Consequence

Trailer brake lights and turn signals that do not illuminate reduce visibility to other drivers, increasing the risk of a crash. Additionally, trailer brakes that fail increase the risk of a crash.

Remedy

Dealers will replace the trailer tow module, free of charge. Owner notification letters were mailed beginning March 17, 2026. Owners may contact FCA US, LLC customer service at 1-800-853-1403. FCA US, LLC's number for this recall is 03D. Vehicle Identification Numbers (VINs) involved in this recall ... Read more

456,287 vehicles affected

Manufacturer: Chrysler (FCA US, LLC)

AIR BAGS: AIR BAG/RESTRAINT CONTROL MODULE

Defect Description

Chrysler (FCA US, LLC) is recalling certain 2025 Ram 2500 Pickup, 3500 Pickup, 3500 Cab Chassis, 4500 Cab Chassis, and 5500 Cab Chassis trucks. A software error in the occupant restraint controller module may cause the driver's side air bag and/or seat belt pretensioner not to deploy in a crash and ... Read more

Consequence

Driving with a disabled electronic stability control system increases the risk of a crash. Additionally, a driver's side air bag or seat belt pretensioner that does not deploy increases the risk of injury in a crash.

Remedy

Dealers will update the occupant restraint controller module software, free of charge. Owner notification letters were mailed January 15, 2026. Owners may contact Chrysler customer service at 800-853-1403. Chrysler's number for this recall is C3C. Vehicle Identification Numbers (VINs) involved in th... Read more

52,565 vehicles affected

Manufacturer: Chrysler (FCA US, LLC)

ELECTRICAL SYSTEM: INSTRUMENT CLUSTER/PANEL

Defect Description

Chrysler (FCA US, LLC) is recalling certain 2025-2026 Ram 1500 Pickup, Ram 2500 Pickup, Ram 3500 Pickup, Ram 3500 Cab Chassis, 4500 Ram Cab Chassis, and Ram 5500 Cab Chassis vehicles. A software error may cause the instrument panel cluster display to be blank. As such, these vehicles fail to comply ... Read more

Consequence

An instrument panel display that does not show critical information, such as warning lights or gear selection, increases the risk of a crash.

Remedy

Dealers will inspect and update the instrument panel software or replace the instrument panel cluster, as necessary, free of charge. Owner notification letters were mailed December 18, 2025. Owners may contact Chrysler customer service at 800-853-1403. Chrysler's numbers for this recall are B4C and ... Read more

72,509 vehicles affected

Manufacturer: Chrysler (FCA US, LLC)

POWER TRAIN:AUTOMATIC TRANSMISSION:GEAR POSITION INDICATION (PRNDL)

Defect Description

Chrysler (FCA US, LLC) is recalling certain Ram 2500 and Ram 3500 vehicles equipped with a 3.5" cluster and column shifter. A software error may cause the gear selection display to be inaccurate. As such, these vehicles fail to comply with the requirements of Federal Motor Vehicle Safety Standard ... Read more

Consequence

An inaccurate gear selection display may mislead the driver as to what gear is actually selected, leading to unexpected vehicle movement and increasing the risk of a crash.

Remedy

Dealers will update the cluster software, free of charge. Owner notification letters were mailed May 22, 2025. Owners may contact Chrysler customer service at 800-853-1403. Chrysler's number for this recall is 36C.

778 vehicles affected

Manufacturer: Chrysler (FCA US, LLC)

Complaint Statistics

103 total complaints 4 crashes 5 fires 2 injuries

Top Reported Components

Component	Complaints
POWER TRAIN	18
ENGINE	15
ELECTRICAL SYSTEM	9
UNKNOWN OR OTHER	8
SERVICE BRAKES	7
STEERING	6
VISIBILITY/WIPER	5
FUEL/PROPULSION SYSTEM	4
FORWARD COLLISION AVOIDANCE: ADAPTIVE CRUISE CONTROL	4
FORWARD COLLISION AVOIDANCE: AUTOMATIC EMERGENCY BRAKING	3

Incident date: Aug 19, 2026

Driving by myself with no load at 12:15 in the afternoon with outside temperature at 80 degrees. Vehicle started to make a large screeching sound coming from engine bay. I pulled over into a parking lot and shut off engine. Vehicle continued to make screeching sound from engine bay; I opened hood... Read more

Fire

Incident date: Aug 19, 2026

Fire

Incident date: Aug 2, 2026

My 2021 Cadillac Escalade ESV with the 6.2L L87 engine received the remedy for Safety Recall 25V-274 (GM recall number N252494001) on July 30, 2025. The dealer inspected the engine, passed it, and performed the higher viscosity oil remedy. The engine was not repaired or replaced. On [DATE], while d... Read more

Incident date: Aug 1, 2026

This vehicle is subject to NHTSA Recall 26V067 (JLR campaign H570/H571/H572) for high-voltage battery thermal overload risk. The recall remedy instructs owners to park and charge the vehicle outside and away from structures. My property does not allow for this: the vehicle must be garaged in a bay d... Read more

Incident date: Jun 10, 2026

While making a right turn from a stop the powertrain briefly lost power and the car slowed before accelerating normally

Incident date: Jun 15, 2026

Unknown was just driving to go to my husband to work and it came on when I was coming back home and when I went to pick my husband up from work and was stopped at a stop sign the lights came back on

Incident date: Jun 15, 2026

Unknown was just driving to go to my husband to work and it came on when I was coming back home and when I went to pick my husband up from work and was stopped at a stop sign the lights came back on

Incident date: Mar 30, 2026

2019 Infiniti QX50 with engine bearing failure defect matching NHTSA Recall #25V-437. Vehicle was sold to me on 12/24/2025 by a dealer, MORE THAN FIVE MONTHS after the recall was issued on 07/14/2025. The dealer NEVER disclosed the active, unrepaired safety recall. Two months after purchase, the en... Read more

Incident date: Jun 18, 2026

My 2016 Ford F-150 (VIN [XXX]) experienced an intermittent failure involving the transmission range sensor system. While driving, the vehicle displayed a check engine light and a “See Service Manual” message. The truck became noticeably underpowered. When shifted into Reverse, the transmission e... Read more

Incident date: Jun 18, 2026

The center mounted Mazda Connect infotainment system in my 2017 Mazda 6 Touring sedan is defective. The screen randomly & intermittently changes display modes while the vehicle is on (driving or parked). It began about 2024 & getting worse. One second it will be on navigation then it arbitrarily sw... Read more

Incident date: Mar 30, 2026

What component or system failed or malfunctioned? Engine and Transission System Fuel Management system, How was your safety or the safety of others put at risk? While driving the vehicle it would just shut off, when you tried to restart vehicle it would not start all you could smell was gas. Has t... Read more

Incident date: Jan 1, 2026

I was using actual smart summon to get my vehicle out of my garage. While standing behind the vehicle, it indicated that the car was in drive with no reversing lights on. The vehicle then rapidly lurches backwards, striking me and a freezer. After reviewing the dashcam footage the vehicle stated it ... Read more

Crash 1 injured

Incident date: Feb 3, 2026

Crash 1 injured

Incident date: Feb 3, 2026

My Tesla repeatedly displayed a “Passenger Safety Restraint” warning related to the front passenger restraint/airbag system. Tesla Service Center in Los Gatos, California attempted multiple repairs over several visits. The first repair identified a pinched and improperly routed passenger seat ha... Read more

Incident date: Mar 31, 2026

The exact failed component is unknown to me at this time, but the issue appears related to the vehicle’s electrical system. Prior to the incident, I received a charging error notification while the vehicle was plugged in. I unplugged the charger from the wall outlet, waited briefly, and plugged it... Read more

Incident date: Apr 22, 2026

This 2020 Camry's transmission will be fine and then when you let off the throttle it will begin to slow as it should. However, when you reapply the throttle the transmission slams very forefully into gear and jolts the car forward violently. Idl'd heard about this on numsrous Camry's before, but un... Read more

Incident date: May 20, 2025

The last 2 weeks my wipers have nearly quit functioning. They don’t go all the way up, will stop in the middle of the windshield, will not go down and when I use the wiper stick to try and get them to go back down the back wiper will start going as well even when I’m not hitting the switch for t... Read more

Incident date: May 20, 2025

UNKNOWN, The transmission slips,it wont drive now and my wheel barrings nearly snapped

Incident date: Oct 9, 2025

They were speeding with their phone in a phone stand watching a show while on the freeway

Incident date: Aug 14, 2025

The Park Assist function caused me to have an incident with my vehicle when parking. I safely engaged the autopark function and followed the prompts for the car to proceed with the parking. Suddenly, when reversing the car violently accelerated, making it impossible to brake or stop the collision wi... Read more

Crash

Incident date: Aug 14, 2025

2020 Hyundai Kona, ~36,300 miles. Driver's side door latch assembly. On or around May 9, 2026, an abnormal mechanical noise began coming from inside the driver's door whenever the key fob lock/unlock button was pressed, consistent with a failing latch actuator. I booked a service appointment, and on... Read more

Incident date: May 6, 2026

Have been getting “engine malfunction power reduced” already had it repaired once. Not sure what is causing this since it was just “repaired “. New battery in place. Also has accident icons on dashboard

Incident date: May 6, 2026

Incident date: Apr 20, 2026

The contact owns a 2021 Ford F-150. The contact stated that while driving at an undisclosed speed, the vehicle experienced a loss of automotive power. No warning light was illuminated. Additionally, while depressing the brake pedal, the vehicle jerked, and the transmission unexpectedly downshifted t... Read more

Incident date: Mar 11, 2026

For the second time the service high voltage system warning has came on first time it was updated the dealership said now it’s back on again A/C not working properly

Incident date: Apr 17, 2026

I routinely have plugged in my PHEV, enjoying the quiet electric ride. I could complete a day's commute with the electric charge. However, the battery capacity was significantly reduced at about 50K miles. At about 73K miles, within a couple miles of starting to drive, the car would decelerate an... Read more

Incident date: Apr 17, 2026

I keep getting check engine lights and they have repaired serval of the items and I did get a letter in the mail saying the battery would now have a lifetime warranty if it threw a certain code and I had two codes come up and some people told me to replace my 12v battery and it would probably clear ... Read more

Incident date: Sep 4, 2025

The contact owns a 2020 Chevrolet Silverado 1500. The contact stated that while his wife was driving approximately 10 MPH and depressing the brake while turning, the ABS warning light illuminated, and the brake pedal remained on the floorboard. The vehicle was pulled into a parking lot and was able ... Read more

Incident date: Sep 4, 2025

The contact owns a 2020 Ford Escape. The contact stated that while operating the vehicle, the check engine warning light remained illuminated. The contact stated that after shifting to reverse(R), the vehicle failed to operate as needed. The vehicle was taken to the local dealer who diagnosed that t... Read more

Incident date: Sep 4, 2025

Incident date: Mar 7, 2026

On June 17th, 2025 while driving from [XXX] back to my home state of [XXX] , I experienced an engine malfunction in Chester, Va where the 6.2 L87 engine was shaking and had severe hesitation. It was diagnosed by the Chevrolet dealership in Chester, VA as suffering severe failure of ALL 8 fuel injec... Read more

Incident date: Mar 7, 2026

Incident date: Dec 1, 2025

The contact owns a 2022 GMC Yukon. The contact stated that while the vehicle was in the dealer for a recall repair for the traction control module and a systems update, the contact stated that the ABS, traction control, and electronic stability control (ESC) systems became disabled. The dealer was n... Read more

Incident date: Nov 4, 2025

My 2023 Tesla Model X began experiencing safety-related failures immediately after a Tesla software update. Right after the update, the vehicle’s cameras stopped functioning correctly and GPS/navigation also stopped working properly. Since that point, subsequent Tesla software updates have failed ... Read more

Incident date: Nov 4, 2025

Incident date: Dec 1, 2025

Incident date: Nov 4, 2025

I bought this truck new I still own problem is the cooling system does not function properly I have put new radiator and all heat and cooling in it the heat and air does not operate properly I have talked with crysler several times and they will help with issue it’s been like this about as long as... Read more

Incident date: Mar 20, 2026

The vehicle’s ignition system began malfunctioning immediately after a recall-related service (Campaign CS2312 – ignition cylinder protector installation) performed on January 9, 2026. Prior to this service, the vehicle had no ignition or electrical issues. After the repair, the ignition key bec... Read more

Incident date: Mar 20, 2026

We own a 2024 Cadillac Lyriq EV. We began experiencing safety concerns related to battery performance and overall vehicle reliability during the active bumper-to-bumper warranty period. These concerns were reported to an authorized GM dealer, Napleton Cadillac, prior to warranty expiration. Service ... Read more

Incident date: Feb 4, 2026

My 2020 Hyundai Kona (VIN: [XXX] ) has a persistent engine stalling safety defect that matches Recall 203 (22-01-042H, NHTSA Campaign 21V301000 – Nu 2.0L Atkinson Engine Inspection and Replacement). The recall addresses improperly heat-treated piston oil rings causing cylinder bore scuffing, accel... Read more

Incident date: Feb 4, 2026

Incident date: Mar 9, 2026

The system does not alert me if someone is sitting in 3rd row without seatbelt. No one has been injured, but i noticed it in January 2026. Not sure how long it has been happening.

Incident date: Mar 9, 2026

The engine seized up at 165,000 miles. According to one [XXX] at Trinity Automotive in Fairfield, Ohio, it's a known issue. According to [XXX] at PrebCo in Eaton, Ohio, the issue is related to low-pressure piston rings. Compression tests showed between 0 psi in one cylinder and between 55 and 58 p... Read more

Incident date: Mar 9, 2026

Constant whine from under the vehicle while in park or idle. Even after having the rack replaced

Incident date: Mar 4, 2026

Durring inspection i observed an exhaust clip making direct contact with a brake line and it had caused some wear to the metal brake line. This vehicle is an active school bus and I found similar failures or evidence of contact on all 3 of my bluebird vision buses equipped with the 7.3 gas V8.

Incident date: Mar 4, 2026

Incident date: Jan 3, 2026

BLOWER MOTOR stopped working. Due to the lack of forced air in the cabin, the windows and windshield fog up and it is impossible to see safely. Blower motor or blower motor resistor has failed providing no heat, no air conditioning, no air at all. Land Rover Service repair shop confirmed this is a ... Read more

Incident date: Jan 3, 2026

Incident date: Feb 19, 2026

The contact owns a 2026 Toyota Camry Hybrid. The contact received notification of NHTSA Campaign Number: 25V869000 (Hybrid Propulsion System); however, the part to do the recall repair was not yet available. The local dealer was contacted. The contact stated that the manufacturer had exceeded a reas... Read more

Showing 50 of 103 complaints.

NHTSA Safety Investigations, RAM 2500

Investigations opened by NHTSA into potential safety defects. These are separate from recalls and may or may not result in a recall.

PE, Closed , Model Year: 2017

Loss of Brake Performance

The Office of Defects Investigation (ODI) opened this investigation on November 28, 2022, after receiving 134 reports from consumers alleging an intermittent or permanent loss of braking performance in certain 2017-2018 Ram 2500-3500 pickup trucks manufactured by Fiat Chrysler Automobiles (FCA). The... alleged failures continued to occur at a steady rate across both models, at all speeds, with limited detectability. Consumers complained that the Anti-lock Braking System (ABS) warning light illuminated on their vehicles. The ABS module works in conjunction with the Hydraulic Control Unit (HCU), an electromechanical device that controls hydraulic pressure to the individual wheel brake assemblies, to manage braking forces during emergency stops. During this investigation, ODI received over 2,500 consumer complaints concerning ABS or HCU warning lights that illuminated on the dashboards of their vehicles. Many consumers described also having trouble with cruise control, traction control, or electronic stability control. Of the complaints received, over 50% mentioned that the ABS or HCU warning light was intermittent in nature. ODI learned that in January 2021, FCA was aware of a problem with the ABS pump motors on the subject vehicles. FCA had been working with the supplier, ZF, on an issue concerning swelling of the brushes inside the motor. According to a briefing given by ZF to FCA on January 15, 2021, the ABS, electronic stability control (ESC), traction control system (TSC) and other functions utilizing the motor would be disabled in the event of a problem with an ABS pump motor. ZF also informed FCA that Slip Control would be inhibited with the driver warning lamp illuminated, base braking would not be affected, and FMVSS stopping distance requirements would still be met. In order to better understand the potential consequences of the brushes swelling and the disablement of the ABS, ESC, TSC and other functions, ODI requested that NHTSA's Vehicle Research and Test Center (VRTC) conduct testing on a subject vehicle with a faulty pump motor installed. During the testing, VRTC found that as the brushes started to swell in the motor, the warning lamp could illuminate intermittently, causing confusion to drivers. Although the warning light illuminated intermittently, VRTC discovered that the pump was not working properly regardless of the warning light status. In this condition drivers might think that their vehicle is operating normally when the warning light is off, but instead, the ABS, ESC, TSC and other functions supported by the pump will not work. Following a series of meetings with FCA to demonstrate the findings ofVRTC's testing, FCA conducted an internal review and on November 27, 2024, FCA submitted safety recalls 24V-896 and 24E-100. In view of the recalls being conducted by FCA, ODI has closed this Preliminary Evaluation. The Agency reserves the right to take additional action if warranted by future circumstances. To review the ODI reports cited in the Closing Resume ODI Report Identification Number document, go to NHTSA.gov.Read more

PE, Closed , Model Year: 2019

High pressure fuel pump failure

The Office of Defects Investigation (ODI) opened PE21-021 on October 14, 2021 to investigate allegations of stall/loss of motive power as a result of high pressure fuel pump failures in certain model year (MY) 2019-2020 RAM 2500, 3500, 4500, and 5500 heavy duty trucks equipped with 6.7L Cummins turb... odiesel engines.On November 12, 2021, FCA filed vehicle recall 21V-880 and equipment recall 21E-094 on the subject population, identifying an `internally failed component? of the high pressure fuel pump equipped on the 6.7L Cummins Turbodiesel engine that introduced debris into the fuel system potentially causing fuel starvation and consequently an unexpected loss of motive power. Discussions with FCA identified the high pressure fuel pump equipped on these vehicles as the Bosch-supplied CP4. On December 16, 2021, Bosch filed recall 21E-101, stating the pump failure was a consequence of a manufacturer application-specific fuel system design.NHTSA subsequently identified recall 21V-586 involving loss of motive power due to failed CP4 fuel pumps on certain BMW vehicles.As a result of having received multiple recalls related to a common component, from two separate vehicle manufacturers, NHTSA?s focus shifted to determine if the related defect allegation was limited in scope to the recalled population. In early 2022, information request letters were sent to FCA and BMW to determine the root cause and consequentially identify the proper scope of potentially defective vehicles. After ODI received their information request response, FCA filed recalls 22V-406, 22E-048, 22V-767, and 22E-087. During review of information request response materials, NHTSA determined that sufficient information to identify a comprehensive recall population could not be produced by FCA or BMW. On March 17, 2023, this Preliminary Evaluation was upgraded to an Engineering Analysis (EA23-001), expanding the scope to include the Tier-one supplier and any manufacturer who equipped or installed similar high pressure fuel pumps subject to the failures observed in the recall population.The ODI reports cited above can be reviewed at: http://www-odi.nhtsa.dot.gov/owners/SearchNHTSAID using the following complaint identification numbers: 11351441, 11361603, 11361616, 11365300, 11365426, 11365858, 11366401, 11372337, 11373793, 11374797, 11376793, 11378173, 11384377, 11386063, 11387018, 11399710, 11402550, 11415339, 11418868, 11418870, 11427075, 11434276, 11436807, 11437226, 11437249, 11437273, 11437292, 11437294, 11437394, 11437399, 11437403, 11437405, 11437423, 11437528, 11437565, 11437579, 11437580, 11437590, 11437679, 11437744, 11437781, 11437842, 11437993, 11438006, 11438008, 11438121, 11438138, 11438155, 11438392, 11438629, 11439359, 11439879, 11440397, 11443030, 11448163, 11458918, 11460558Read more

EA, Closed , Model Year: 2014

Steering loss due to linkage separation

On December 17, 2018, NHTSA's Office of Defects Investigation (ODI) opened Preliminary Evaluation PE18016 to investigate alleged drag link failures in the steering system on model year (MY) 2015 and 2016 Ram 2500 trucks manufactured by FCA US, LLC (FCA). The drag link failures were found to be due... to a safety defect with the steering linkage where the drag link adjustable connector (used to adjust the steering system), held in position by two opposing jam nuts, can loosen. The loosening of this part can lead to wear and deterioration of the threads and eventual separation of the drag link, causing loss of steering. During the course of PE18016, it was found that two styles of drag link were used by FCA on the subject vehicles. The subject vehicles consist of two drivetrain types including four-wheel drive (4WD) and two-wheel drive (2WD). The 4WD and 2WD trucks used drag links of differing design but both incorporated the same threaded connector. In January 2019 FCA issued recall 19V-021 to address a potential loss of steering control in certain Model Year (MY) 2013-2018 4WD RAM 2500 and 3500 trucks. The trucks using the 2WD style drag link were not included in the scope of recall 19V-021. ODI upgraded PE18016 to an Engineering Analysis EA19004 on December 12, 2019. The purpose of EA19004 was to investigate if the root cause of the safety defect addressed by recall 19V-201 also affected the 2WD trucks and evaluate FCA’s rationale for not including them. ODI also monitored incoming consumer complaints regarding the remedy associated with 19V-021 and evaluated the suitability and long-term effectiveness of the prescribed repair. In the Defect Information Report submitted for recall 19V-021, FCA stated that the outboard jam nut could loosen and result in damage to the threading of the steering drag link connector. This could cause a separation in the drag link resulting in a loss of steering control. FCA determined that only the 4WD style drag link was affected and did not recall trucks with the 2WD style drag link due to design differences that made it unsusceptible to this failure mode. The repair remedy called for the steering coupler to be tightened to the proper torque prior to the jam nut being spot welded to the coupler body. If the coupler has already become detached or correct torque cannot be obtained, the drag link is to be replaced with an updated unit that went into production on the MY2019 RAM trucks.This updated unit uses a clamp to secure the coupler in place of the jam nuts used on original style components. In order to determine if the 2WD drag link was susceptible to the same defect found on the 4WD vehicles, ODI requested that our Vehicle Research and Test Center (VRTC) conduct testing on both RAM 2500 4WD and 2WD trucks. This testing was to determine operating conditions that might lead to loosened jam nuts of the recalled 4WD design and recreate these conditions on the 2WD vehicles to discover whether the 2WD design would also experience the loosening defect. Results from VRTC’s dynamic testing indicated that when the jam nuts are significantly under-torqued, they may loosen further from regular vehicle operation on the 4WD vehicles. Further, VRTC testing does not refute FCA’s assertion that the failure mechanism does not exist in the 2WD steering system. At the time of this closing resume, ODI has only received two allegations of drag link separation on 2WDvehicles.Neither could be validated as resulting from loose jam nuts. Since the release of recall 19V-021 ODI has received consumer complaints regarding the appearance of the spot weld applied to the defective drag link and the inability to have the steering properly aligned after welding of the jam nut. In September 2023, FCA provided owners with a supplemental Vehicle Alignment Clarification notification that provided information on an updated alignment procedure. Regarding the spot weld remedy used on the 4WD vehicles, ODI is concerned about the remedy in that during an alignment by a non-dealer repair facility, the spot weld might not be replaced after the alignment. To date there is no complaint trend of post alignment drag link separations, weld failures or other safety related incidents on remedied vehicles. This investigation is being closed with no further action. The closing of this investigation does not constitute a finding by NHTSA that a safety-related defect does not exist. The Agency reserves the right to take additional action if warranted by future circumstances.Read more

PE, Closed , Model Year: 2013

Steering loss due to linkage separation

On December 17, 2018, NHTSA's Office of Defects Investigation (ODI) opened Preliminary Evaluation (PE) 18-016 to investigate the steering system on model year (MY) 2015 and 2016 Ram 2500 manufactured by FCA US, LLC (FCA). Four complaints were received alleging separation of the drag link, a steering... linkage that connects between the right front steering knuckle and the pitman arm on the steering box output shaft. The failures were found to be at a threaded coupler within the drag link used for adjusting the length of the linkage during routine maintenance (alignment) of the steering system.Once separation occurs, turning the steering wheel has no effect, and there is no way for the driver to control or maintain the direction of the vehicle. During the investigation, it was determined that the same threaded coupler was used on two different drag link designs FCA manufactured on MY 2013-2018 Ram 2500 and 3500 pickups. FCA refers to the designs as either 4x2 or 4x4 style. In both designs, the coupler is prevented from turning on the drag link via two jam nuts that are tightened against the coupler. In its response to NHTSA's March 15, 2019, Information Request (IR) letter, FCA identified 48 incidents alleging separation of the steering linkage at the coupler resulting in a loss of steering control. Of those, 13 involved a crash, one of which resulted in an injury. All of the separations involved the 4x4 style drag link. Additionally, FCA's IR response refers to over 300 4x4 style equipped vehicles that experienced, or may have experienced loosening of one or more coupler jam nuts. On January 25, 2019, FCA submitted a Defect Information Report (DIR) initiating NHTSA Recall No. 19V-021. In its DIR, FCA stated that the outboard jam nut in certain MY 2013-2018 Ram 2500 and 3500 could loosen potentially resulting in damage to the coupler and/or drag link threading allowing one end of the drag link to separate. The DIR notes that drag link separation results in loss of steering control, which in turn can cause a crash without warning. FCA's DIR did not identify a root cause for the defect, however it posits that an improperly torqued outboard jam nut could loosen, and with long-term vehicle use, cause damage to the outer link bar and/or coupler threads due to relative motion between the two components. The scope of Recall 19V-021 included vehicles with the 4x4 style drag link only. Also discussed in its IR response, FCA noted that the 4x2 style drag link contains a design difference (the outboard portion of the drag link is straight while the 4x4 style contains a bend) which it suggests may result in differences in the mechanical (bending) loads presented at the coupler and jam nut interface. Moreover, the DIR states that While root cause of the 4x4 style defect has not been established, FCA US believes that bending loads on the drag link is, at least, a causal contributing factor. FCA notes it did not identify any reports alleging 4x2 style separation as well as only three reports of loosening of jam nuts, two of which resulted in loosening that provided obvious warning to the vehicle operator, indicating a different failure mode.NHTSA is upgrading this investigation to Engineering Analysis (EA) 19-004 in order to continue to monitor the subject 4x2 style vehicles for evidence of field failures. Additionally, in conjunction with NHTSA's Vehicle Research and Test Center, ODI intends to more thoroughly study potential root cause(s) of the 4x4 style defect mechanism, and if identified, will seek to determine if the 4x2 drag link is susceptible to the same mechanism(s). NHTSA will also evaluate the long-term suitability of the recallRead more

RAM 2500 - All Years Overview

Complete safety history for the RAM 2500 across all model years (2009, 2026).

156 Total Recalls

7,796 Total Complaints

4 Investigations

352 Reported Crashes

129 Reported Fires

5 Reported Deaths

RAM 2500 - Year by Year

Compare recalls and complaints across model years. Click any year to see full details.

Year	Recalls	Complaints
2026	7	38	View
2025 (current)	6	103
2024	5	79	View
2023	8	65	View
2022	12	275	View
2021	8	162	View
2020	10	233	View
2019	12	271	View
2018	10	3,804	View
2017	12	1,025	View
2016	14	374	View
2015	15	289	View
2014	16	484	View
2013	16	273	View
2010	4	309	View
2009	1	12	View

Other RAM Models

Model	Recalls	Complaints
3500	357	3,389	View
1500	324	16,135	View
PROMASTER	176	777	View
5500	163	198	View
4500	162	64	View
PROMASTER CITY	46	139	View
C/V TRADESMAN	5	14	View
3500 CAB CHASSIS	2	4	View

Vehicle Safety

Consumer Safety

Infrastructure

Public Health

2025 RAM 2500

Complaint Statistics

Top Reported Components

NHTSA Safety Investigations, RAM 2500

RAM 2500 - All Years Overview

RAM 2500 - Year by Year

Other RAM Models