ELECTRONIC STABILITY CONTROL (ESC):CONTROL MODULE
BMW of North America (BMW) is recalling certain 2023-2024 X1, 2024-2025 X5, 2025 X6, 2023-2025 X7, 740i, 760i, 2024 XM, 530i, 540i, i7, 750e, X2, 2024-2025 i5, 2024 Rolls Royce Spectre, 2025 MINI Countryman S ALL4, JCW Countryman ALL4, and 2025 MINI Hardtop 2 Door (Cooper, Cooper S) vehicles. Please refer to the recall report for the complete list of models. The welds in the servomotor of the integrated brake control module may break, causing a loss of power brake assist and rear brake function. In addition, the Antilock Brake System (ABS) and Dynamic Stability Control (DSC) system may not function.
Remedy: Dealers will replace the integrated brake system, free of charge. Owner notification letters were mailed November 13, 2024. Owners can contact BMW Customer Service at 1-800-525-7417.
309 vehicles affected
SERVICE BRAKES, HYDRAULIC:ANTILOCK/TRACTION CONTROL/ELECTRONIC LIMITED SLIP:CONTROL UNIT/MODULE
BMW of North America (BMW) is recalling certain 2023-2024 X1, 2024-2025 X5, 2025 X6, 2023-2025 X7, 740i, 760i, 2024 XM, 530i, 540i, i7, 750e, X2, 2024-2025 i5, 2024 Rolls Royce Spectre, 2025 MINI Countryman S ALL4, JCW Countryman ALL4, and 2025 MINI Hardtop 2 Door (Cooper, Cooper S) vehicles. Please refer to the recall report for the complete list of models. The welds in the servomotor of the integrated brake control module may break, causing a loss of power brake assist and rear brake function. In addition, the Antilock Brake System (ABS) and Dynamic Stability Control (DSC) system may not function.
Remedy: Dealers will replace the integrated brake system, free of charge. Owner notification letters were mailed November 13, 2024. Owners can contact BMW Customer Service at 1-800-525-7417.
309 vehicles affected
SEAT BELTS:FRONT
BMW of North America, LLC (BMW) is recalling certain 2024 XM, 2025 BMW X5 sDrive40i, X5 xDrive40i, X5 M60i, X5 M, X5 xDrive50e, X6 xDrive40i, X6 M60i, X6 M, X7 xDrive40i, X7 M60i, and Alpina XB7 vehicles. The seat belt system may inaccurately detect that passengers are belted, preventing the seat belt warning light from illuminating and possibly causing the supplemental restraint system to not deploy as intended during a crash. As such, these vehicles fail to comply with the requirements of Federal Motor Vehicle Safety Standard number 208, "Occupant Crash Protection."
Remedy: Dealers will inspect and replace the front seat lower seat belts as necessary, free of charge. Owner notification letters were mailed July 12, 2024. Owners may contact BMW customer service at 1-800-525-7417.
3,256 vehicles affected
EQUIPMENT:OTHER:LABELS
BMW of North America, LLC (BMW) is recalling certain 2024-2025 X5 xDrive40i vehicles. The tire information placard may indicate an incorrect tire size and tire pressure. As such, these vehicles fail to comply with the requirements of Federal Motor Vehicle Safety Standard number 110, "Tire Selection and Rims."
Remedy: Dealers will replace the tire information placard, free of charge. Owner notification letters were mailed July 9, 2024. Owners may contact BMW customer service at 1-800-525-7417.
703 vehicles affected
SERVICE BRAKES, HYDRAULIC:POWER ASSIST:ELECTRIC:CONTROL MODULE
BMW of North America, LLC. (BMW) is recalling certain 2023-2025 BMW, MINI, and Rolls-Royce vehicles. Please see the recall report for a complete list of models and model years. The integrated brake (IB) system may malfunction and result in a loss of power brake assist or cause the Antilock Brake (ABS) and Dynamic Stability Control (DSC) systems to not function properly.
Remedy: Dealers will replace the integrated brake system, free of charge. Owner notification letters were mailed between June and December 2024. Owners may contact BMW customer service at 1-800-525-7417 or Rolls Royce customer service at 1-877-877-3735.
266,716 vehicles affected
ELECTRONIC STABILITY CONTROL (ESC)
BMW of North America, LLC. (BMW) is recalling certain 2023-2025 BMW, MINI, and Rolls-Royce vehicles. Please see the recall report for a complete list of models and model years. The integrated brake (IB) system may malfunction and result in a loss of power brake assist or cause the Antilock Brake (ABS) and Dynamic Stability Control (DSC) systems to not function properly.
Remedy: Dealers will replace the integrated brake system, free of charge. Owner notification letters were mailed between June and December 2024. Owners may contact BMW customer service at 1-800-525-7417 or Rolls Royce customer service at 1-877-877-3735.
266,716 vehicles affected
I have owned my BMW for only 19 months and in that short period of time, I have had to replace my windhsield (with OEM BMW Glass) 2x due to small road debris impacts (normal gravel/sand) becoming major fractures in less than a day. I have been driving for 40 years and only replaced 3 windshields in my life--2 of them in the past 10 months in this brand new BMW. Same roads and weather I have driven on for the past 24 years, in the south [XXX] ) so no unusual road gravel of weather conditions. I have to believe that these windshields are somehow more fragile than they should be. INFORMATION REDACTED PURSUANT TO THE FREEDOM OF INFORMATION ACT (FOIA), 5 U.S.C. 552(B)(6)
The contact owns a 2025 BMW X5. The contact stated that while reversing, the back-over prevention camera display audio system failed to function as intended. The back-over prevention camera audio alert failed to beep when the vehicle was close to other vehicles or objects. The vehicle was taken to the dealer; however, the failure was not duplicated. The contact stated that a computer test was performed; however, the failure was not duplicated. Additionally, the technician test drove the vehicle, but the failure was not duplicated. The vehicle was not diagnosed or repaired by an independent mechanic or dealer. The contact had a neck injury and stated that the failure of the back-over prevention system was an inconvenience. The manufacturer was not made aware of the failure. The failure mileage was approximately 30.
The contact owns a 2025 BMW X5. The contact stated that while his wife was driving at an undisclosed speed, for an unknown reason, she lost control of the vehicle and hit a telephone pole, where the vehicle came to a stop. The driver-side and passenger-side air bags did not deploy. No warning lights were illuminated. A police report was filed. The contact's wife was taken to the hospital by ambulance. The contact's wife did not suffer injuries. The vehicle was towed to a towing yard. The insurance company was notified. The manufacturer was made aware of the failure. The manufacturer advised the contact that a field inspector would be sent to inspect the vehicle. The field inspector inspected the vehicle. However, no information was provided regarding why the air bags did not deploy. The failure mileage was approximately 8,000.
Crash
We are reporting a safety issue with the BMW X5 xDrive50e model year 2025. I purchased this car on December 9, 2024, from BMW of Pembroke Pines, 14800 Sheridan Street Pembroke Pines FL 33331. Within two months of purchase, we found that car has unintended acceleration while it is about to be parked at very slow speed. I reported this safety issue to BMW dealer in Pembroke Pines FL where I purchased the Car. The dealership kept this car of investigation. After about five weeks they returned the car with a comment on my invoice that car is working normally. On October 24, 2025, while on vacation to St. Augustine FL and parking at the visitor center SUV accelerated and hit the wall of the visitor center. All the airbags opened and saved us from serious injuries. The crash report of this incident is attached to this report. BMW failed to investigate this issue and put us and others at high risk.
Crash
1 injured
We are reporting a safety issue with the BMW X5 xDrive50e model year 2025. I purchased this car on December 9, 2024, from BMW of Pembroke Pines, 14800 Sheridan Street Pembroke Pines FL 33331. Within two months of purchase, we found that car has unintended acceleration while it is about to be parked at very slow speed. I reported this safety issue to BMW dealer in Pembroke Pines FL where I purchased the Car. The dealership kept this car of investigation. After about five weeks they returned the car with a comment on my invoice that car is working normally. On October 24, 2025, while on vacation to St. Augustine FL and parking at the visitor center SUV accelerated and hit the wall of the visitor center. All the airbags opened and saved us from serious injuries. The crash report of this incident is attached to this report. BMW failed to investigate this issue and put us and others at high risk.
Crash
1 injured
Incident Date: January 9, 2026 Vehicle: 2025 BMW X5 xDrive50e Issue: car fire On January 9, 2026, while operating my 2025 BMW X5 xDrive50e (purchased new on June 14, 2025), a malfunction warning appeared on the infotainment screen. Immediately following this alert, the vehicle cabin filled rapidly with smoke. Upon stopping and exiting the vehicle, I observed flames coming from underneath the car. The fire quickly spread to the rear and trunk area of the vehicle. The car is likely a total loss. This fire created a life-threatening situation, as the cabin filled with smoke while the vehicle was in motion, requiring an emergency exit before the flames spread. A police report was filed on the date of the incident (01/09/2026); a copy of the report is pending. My insurance provider has been notified and is scheduled to inspect the vehicle early next week. Prior to this event, the vehicle had not been involved in any collisions and had no aftermarket modifications. The vehicle is currently located at All Star Collision in Farmingdale, though it is expected to be relocated by Progressive, my insurance carrier, in the near future. A police report was filed today but I have yet to receive a copy. I'm happy to provide if needed upon receipt.
Fire
While attempting to park forward into a handicapped parking space, the car lurched forward approximately 4 feet instead of braking/stopping. The braking system appeared to fail and the electrical/sensors/ADAS warnings did not engage. The vehicle drove over a cement parking block and struck a building shrub, signage and hvac unit.
Crash
While attempting to park forward into a handicapped parking space, the car lurched forward approximately 4 feet instead of braking/stopping. The braking system appeared to fail and the electrical/sensors/ADAS warnings did not engage. The vehicle drove over a cement parking block and struck a building shrub, signage and hvac unit.
Crash
While attempting to park forward into a handicapped parking space, the car lurched forward approximately 4 feet instead of braking/stopping. The braking system appeared to fail and the electrical/sensors/ADAS warnings did not engage. The vehicle drove over a cement parking block and struck a building shrub, signage and hvac unit.
Crash
The vehicle shut off and would not start while at a stop light. It is new: under one year old and still within warranty. The error was a “Restart not possible. Drivetrain fault” as shown in the picture. My safety as well as my passenger’s were put at risk due to being in a congested roadway and unable to move. After attempting to restart the system software, I then observed a “High voltage battery” warning. At that point my passenger and I exited the vehicle. As I was on the phone with emergency roadside assistance while out of the vehicle for about 10 minutes, the vehicle was able to start with the warning now displaying “Drivetrain. You can continue driving. Have the problem checked by your local service center.” I hesitantly drove the vehicle home. While parked, I checked about 15 minutes later and the issue resurfaced (as pictured). The problem has not yet been taken to the dealership. It will be tomorrow. The issue has not yet been inspected by any other representatives. There were no warning signs whatsoever before the issue occurred. The vehicle simply shut off, and upon attempting restart the aforementioned errors were observed.
The vehicle shut off and would not start while at a stop light. It is new: under one year old and still within warranty. The error was a “Restart not possible. Drivetrain fault” as shown in the picture. My safety as well as my passenger’s were put at risk due to being in a congested roadway and unable to move. After attempting to restart the system software, I then observed a “High voltage battery” warning. At that point my passenger and I exited the vehicle. As I was on the phone with emergency roadside assistance while out of the vehicle for about 10 minutes, the vehicle was able to start with the warning now displaying “Drivetrain. You can continue driving. Have the problem checked by your local service center.” I hesitantly drove the vehicle home. While parked, I checked about 15 minutes later and the issue resurfaced (as pictured). The problem has not yet been taken to the dealership. It will be tomorrow. The issue has not yet been inspected by any other representatives. There were no warning signs whatsoever before the issue occurred. The vehicle simply shut off, and upon attempting restart the aforementioned errors were observed.
On September 2, 2025, my 2025 BMW X5 xDrive50e was involved in a head-on collision with another vehicle. Despite the severity of the impact, the following safety systems failed to deploy: Front airbags Driver seatbelt pretensioner BMW Assist / automatic emergency notification Witnesses reported that my vehicle briefly went airborne before landing with the rear wheels up on a curb. I suffered neck injuries, and my vehicle sustained significant frontal damage. BMW later downloaded the Event Data Recorder (EDR) and confirmed: A frontal non-deployment event Three fault codes in the airbag control module (ACSM) post-crash The crash algorithm activated and reset ΔV reached approx. 12.4 mph longitudinal Forward Collision Mitigation system issued an acute warning 0.5 seconds before impact BMW states the “impulse was not sufficient” to trigger restraint deployment BMW has refused to provide: The deployment thresholds (ΔV criteria) for airbags or pre-tensioners Any engineering explanation for why restraint systems did not activate Any technical rationale for the ACSM fault codes Any escalation beyond Customer Relations All I have been given is an unsigned summary letter and the raw EDR file. BMW Customer Relations stated that engineering is “not customer-facing” and that no additional information will be provided. This leaves serious concerns that: The restraint systems did not function properly in a real-world impact. BMW is refusing to disclose the engineering basis for its conclusions. Consumers may be at risk if this is a repeatable failure mode. I am requesting NHTSA review this incident as a potential defect in the airbag, pretensioner, and/or crash-sensing system in the 2025 BMW X5. I can provide the EDR report, photos, BMW’s letter, and full correspondence upon request. VIN: [XXX] Mileage: ~10,700 Crash Date: 09/02/2025 BMW Case #: XXX INFORMATION REDACTED PURSUANT TO THE FREEDOM OF INFORMATION ACT (FOIA), 5 U.S.C. 552(B)(6)
Crash
1 injured
On September 2, 2025, my 2025 BMW X5 xDrive50e was involved in a head-on collision with another vehicle. Despite the severity of the impact, the following safety systems failed to deploy: Front airbags Driver seatbelt pretensioner BMW Assist / automatic emergency notification Witnesses reported that my vehicle briefly went airborne before landing with the rear wheels up on a curb. I suffered neck injuries, and my vehicle sustained significant frontal damage. BMW later downloaded the Event Data Recorder (EDR) and confirmed: A frontal non-deployment event Three fault codes in the airbag control module (ACSM) post-crash The crash algorithm activated and reset ΔV reached approx. 12.4 mph longitudinal Forward Collision Mitigation system issued an acute warning 0.5 seconds before impact BMW states the “impulse was not sufficient” to trigger restraint deployment BMW has refused to provide: The deployment thresholds (ΔV criteria) for airbags or pre-tensioners Any engineering explanation for why restraint systems did not activate Any technical rationale for the ACSM fault codes Any escalation beyond Customer Relations All I have been given is an unsigned summary letter and the raw EDR file. BMW Customer Relations stated that engineering is “not customer-facing” and that no additional information will be provided. This leaves serious concerns that: The restraint systems did not function properly in a real-world impact. BMW is refusing to disclose the engineering basis for its conclusions. Consumers may be at risk if this is a repeatable failure mode. I am requesting NHTSA review this incident as a potential defect in the airbag, pretensioner, and/or crash-sensing system in the 2025 BMW X5. I can provide the EDR report, photos, BMW’s letter, and full correspondence upon request. VIN: [XXX] Mileage: ~10,700 Crash Date: 09/02/2025 BMW Case #: XXX INFORMATION REDACTED PURSUANT TO THE FREEDOM OF INFORMATION ACT (FOIA), 5 U.S.C. 552(B)(6)
Crash
1 injured
On September 2, 2025, my 2025 BMW X5 xDrive50e was involved in a head-on collision with another vehicle. Despite the severity of the impact, the following safety systems failed to deploy: Front airbags Driver seatbelt pretensioner BMW Assist / automatic emergency notification Witnesses reported that my vehicle briefly went airborne before landing with the rear wheels up on a curb. I suffered neck injuries, and my vehicle sustained significant frontal damage. BMW later downloaded the Event Data Recorder (EDR) and confirmed: A frontal non-deployment event Three fault codes in the airbag control module (ACSM) post-crash The crash algorithm activated and reset ΔV reached approx. 12.4 mph longitudinal Forward Collision Mitigation system issued an acute warning 0.5 seconds before impact BMW states the “impulse was not sufficient” to trigger restraint deployment BMW has refused to provide: The deployment thresholds (ΔV criteria) for airbags or pre-tensioners Any engineering explanation for why restraint systems did not activate Any technical rationale for the ACSM fault codes Any escalation beyond Customer Relations All I have been given is an unsigned summary letter and the raw EDR file. BMW Customer Relations stated that engineering is “not customer-facing” and that no additional information will be provided. This leaves serious concerns that: The restraint systems did not function properly in a real-world impact. BMW is refusing to disclose the engineering basis for its conclusions. Consumers may be at risk if this is a repeatable failure mode. I am requesting NHTSA review this incident as a potential defect in the airbag, pretensioner, and/or crash-sensing system in the 2025 BMW X5. I can provide the EDR report, photos, BMW’s letter, and full correspondence upon request. VIN: [XXX] Mileage: ~10,700 Crash Date: 09/02/2025 BMW Case #: XXX INFORMATION REDACTED PURSUANT TO THE FREEDOM OF INFORMATION ACT (FOIA), 5 U.S.C. 552(B)(6)
Crash
1 injured
drivetrain lights came on out of no where. i was coming to a red light and when car stopped the light on dash came on and message came on for drivetrain malfunction. Car was turned off and on and message went away. Car was brought to dealer and they were able to diagnose saying 3 injector problem and need to replace cylinder head. Was told this a problem with the new V8 engines. can be dangerous if driving and message is gone and continue driving.
drivetrain lights came on out of no where. i was coming to a red light and when car stopped the light on dash came on and message came on for drivetrain malfunction. Car was turned off and on and message went away. Car was brought to dealer and they were able to diagnose saying 3 injector problem and need to replace cylinder head. Was told this a problem with the new V8 engines. can be dangerous if driving and message is gone and continue driving.
The contact owns a 2025 BMW X5. The contact stated that while driving at an undisclosed speed, the brake pedal was depressed, and the vehicle failed to brake smoothly. No warning lights were illuminated. The vehicle was not diagnosed or repaired by an independent mechanic or dealer. The dealer was made aware of the failure; however, the contact was informed that parts were not available. The contact received notification of NHTSA Campaign Number: 24V104000 (Electronic Stability Control (ESC), Service Brakes, Hydraulic); however, the parts were not yet available. The contact stated that the parts had not been available since 2024, when the recall was initiated. The manufacturer was not made aware of the failure. The failure mileage was unknown.
See attached document for complaint.
See attached document for complaint.
While driving my 2025 BMW X5 xDrive50e, a “Power Supply Malfunction – Stop Vehicle Immediately” warning appeared on the dashboard, advising me to pull over and call roadside assistance. The vehicle had previously been repaired for the same issue at Braman BMW in Miami, but the malfunction recurred the next day after getting it back. Prior to this, the car was out of service for 103 days following an accident due to BMW’s inability to supply a backordered acceleration sensor. The repair was completed in August 2025. The repeated “Power Supply Malfunction” messages raise concerns about the reliability of the electrical and hybrid power systems and potential loss of power while driving. The issue has been confirmed and documented by Braman BMW. The component remains under BMW inspection.
While driving my 2025 BMW X5 xDrive50e, a “Power Supply Malfunction – Stop Vehicle Immediately” warning appeared on the dashboard, advising me to pull over and call roadside assistance. The vehicle had previously been repaired for the same issue at Braman BMW in Miami, but the malfunction recurred the next day after getting it back. Prior to this, the car was out of service for 103 days following an accident due to BMW’s inability to supply a backordered acceleration sensor. The repair was completed in August 2025. The repeated “Power Supply Malfunction” messages raise concerns about the reliability of the electrical and hybrid power systems and potential loss of power while driving. The issue has been confirmed and documented by Braman BMW. The component remains under BMW inspection.
While driving my 2025 BMW X5 xDrive50e, a “Power Supply Malfunction – Stop Vehicle Immediately” warning appeared on the dashboard, advising me to pull over and call roadside assistance. The vehicle had previously been repaired for the same issue at Braman BMW in Miami, but the malfunction recurred the next day after getting it back. Prior to this, the car was out of service for 103 days following an accident due to BMW’s inability to supply a backordered acceleration sensor. The repair was completed in August 2025. The repeated “Power Supply Malfunction” messages raise concerns about the reliability of the electrical and hybrid power systems and potential loss of power while driving. The issue has been confirmed and documented by Braman BMW. The component remains under BMW inspection.
The rear cross traffic alert on this vehicle either does not work at all or, when it does work, it is ineffective in warning the driver. I brought the vehicle into my BMW dealer and they told me that it is operating as intended. In most cases, when backing out of a parking space or my driveway, I get no warning at all. In some cases, I did get some faint warning that was not obvious enough to actually get my attention. Many times, when I was backing up, I almost was hit by a passing car because I expected to get a warning and did not. There is a very large number of complaints about this problem on the internet. Unfortunately, I did not see these complaints before buying the vehicle. Had I known that this safety feature was ineffective in what it was designed to do, I would not have bought the vehicle. I am actually considering selling vehicle after only 7 months of ownership and taking a loss as a result of this problem. If there is a loss to be taken, it should be by BMW not me as the consumer. I believe that BMW has committed fraud with respect to rear cross traffic alert. They falsely represent that the vehicle has rear cross traffic alert which is a material fact known by them to be false. Buyers, to their own detriment, rely on this false representation in deciding to buy the vehicle. The buyer is not getting an important safety feature that they paid for and the absence of the safety feature puts them at risk of a collision.
NHTSA issued a recall (#24v-104) in Feb of 2024. As yet (1 1/2 years later), no remedy is available. How long must I be at risk of a motor vehicle accident before a solution is available?
While driving this new 2025 BMW X5 M60i vehicle with only 6200 miles, all of a sudden battery failure indicator came on in the middle of traffic, followed by drivetrain failure / malfunction indicator came on. BMW roadside assistance was contacted, and advised me to have vehicle stopped and pulled over immediately and towed. Situation was dangerous as the traffic was flowing at 40 mph. Vehicle Eventually totally lost power. It was towed to local BMW dealership where it was purchased from. The dealership service department was able to reproduce the issue, confirmed that it was a cracked transmission casing, resulting in fluid leak, causing electrical failure and leading to mechanical failure. BMW head office was contacted By the dealership service department and new transmission was requested. Please refer to pages 3 and 4 of the service report attached for details. This is a brand-new vehicle, bought directly from dealership 5 months ago, and had been driven with caution and care. No prior indicators were ever noticed. My safety and safety of nearby vehicles was compromised due to the fact that power was suddenly lost and engine failure unexpectedly occured at such low mileage in fastr flowing traffic. It is incomprehensible that a brand-new vehicle such as this would all of a sudden develop a serious malfunction without prior warning, and have a cracked / broken transmission casing which was found to be leaking fluids. It seems it was defective to begin with.
While driving this new 2025 BMW X5 M60i vehicle with only 6200 miles, all of a sudden battery failure indicator came on in the middle of traffic, followed by drivetrain failure / malfunction indicator came on. BMW roadside assistance was contacted, and advised me to have vehicle stopped and pulled over immediately and towed. Situation was dangerous as the traffic was flowing at 40 mph. Vehicle Eventually totally lost power. It was towed to local BMW dealership where it was purchased from. The dealership service department was able to reproduce the issue, confirmed that it was a cracked transmission casing, resulting in fluid leak, causing electrical failure and leading to mechanical failure. BMW head office was contacted By the dealership service department and new transmission was requested. Please refer to pages 3 and 4 of the service report attached for details. This is a brand-new vehicle, bought directly from dealership 5 months ago, and had been driven with caution and care. No prior indicators were ever noticed. My safety and safety of nearby vehicles was compromised due to the fact that power was suddenly lost and engine failure unexpectedly occured at such low mileage in fastr flowing traffic. It is incomprehensible that a brand-new vehicle such as this would all of a sudden develop a serious malfunction without prior warning, and have a cracked / broken transmission casing which was found to be leaking fluids. It seems it was defective to begin with.
The contact owns a 2025 BMW X5. The contact received notification of NHTSA Campaign Number: 24V104000 (ELECTRONIC STABILITY CONTROL (ESC), SERVICE BRAKES, HYDRAULIC); however, the part to do the recall repair was unavailable. The contact stated that the manufacturer had exceeded a reasonable amount of time for the recall repair. The manufacturer was made aware of the issue. The contact had not experienced a failure.
The contact owns a 2025 BMW X5. The contact received notification of NHTSA Campaign Number: 24V104000 (ELECTRONIC STABILITY CONTROL (ESC), SERVICE BRAKES, HYDRAULIC); however, the part to do the recall repair was unavailable. The contact stated that the manufacturer had exceeded a reasonable amount of time for the recall repair. The manufacturer was made aware of the issue. The contact had not experienced a failure.
The contact owns a 2025 BMW X5. The contact received notification of NHTSA Campaign Number: 24V104000 (Electronic Stability Control (ESC), Service Brakes, Hydraulic). The contact was informed by the dealer that parts for the recall repair were only available for newer vehicles. The manufacturer was made aware of the issue and informed the contact that parts were not yet available for the vehicle. The contact had not experienced failure.
The contact owns a 2025 BMW X5. The contact received notification of NHTSA Campaign Number: 24V104000 (Electronic Stability Control (ESC), Service Brakes Hydraulic). The contact called the dealer, who confirmed that parts were not yet available. The vehicle was not diagnosed or repaired. The manufacturer was contacted and informed the contact a second notice would be provided when parts became available. The contact had not experienced a failure.
The contact owns a 2025 BMW X5. The contact received notification of NHTSA Campaign Number: 24V104000 (Electronic Stability Control (ESC), Service Brakes Hydraulic). The contact called the dealer, who confirmed that parts were not yet available. The vehicle was not diagnosed or repaired. The manufacturer was contacted and informed the contact a second notice would be provided when parts became available. The contact had not experienced a failure.
The contact owns a 2025 BMW X5. The contact received notification of NHTSA Campaign Number: 24V104000 (Electronic Stability Control (ESC), Service Brakes, Hydraulic). The contact was informed by the dealer that parts for the recall repair were only available for newer vehicles. The manufacturer was made aware of the issue and informed the contact that parts were not yet available for the vehicle. The contact had not experienced failure.
BRAND NEW X5 BMW 50E CAME TO A STOP AND ENTIRE CAR WENT DEAD. NO START, LIGHTS, IN TOTAL DARKNESS WITH NO EMERGENCY LIGHTS. DASH SCREEN DID SHOW A DRIVE TRANE MALFUNCTION BEFORE IT TOTALLY DIED. CAR WAS REPAIRED AFTER 2 MONTHS AND REPLACEMENT PARTS MALFUNCTION. CAR STILL HAS ELECTRONIC ISSUES AND HAS BEEN IN THE SHOP 3 TIMES SINCE MAJOR FAILURE. SAFETY ISSUE WITH NO EMERGENCY LIGHTS AND IF I HAD BEEN DRIVING AND VEHICLE WENT DEAD I WOULD HAVE HAD A CRASH.
BRAND NEW X5 BMW 50E CAME TO A STOP AND ENTIRE CAR WENT DEAD. NO START, LIGHTS, IN TOTAL DARKNESS WITH NO EMERGENCY LIGHTS. DASH SCREEN DID SHOW A DRIVE TRANE MALFUNCTION BEFORE IT TOTALLY DIED. CAR WAS REPAIRED AFTER 2 MONTHS AND REPLACEMENT PARTS MALFUNCTION. CAR STILL HAS ELECTRONIC ISSUES AND HAS BEEN IN THE SHOP 3 TIMES SINCE MAJOR FAILURE. SAFETY ISSUE WITH NO EMERGENCY LIGHTS AND IF I HAD BEEN DRIVING AND VEHICLE WENT DEAD I WOULD HAVE HAD A CRASH.
BRAND NEW X5 BMW 50E CAME TO A STOP AND ENTIRE CAR WENT DEAD. NO START, LIGHTS, IN TOTAL DARKNESS WITH NO EMERGENCY LIGHTS. DASH SCREEN DID SHOW A DRIVE TRANE MALFUNCTION BEFORE IT TOTALLY DIED. CAR WAS REPAIRED AFTER 2 MONTHS AND REPLACEMENT PARTS MALFUNCTION. CAR STILL HAS ELECTRONIC ISSUES AND HAS BEEN IN THE SHOP 3 TIMES SINCE MAJOR FAILURE. SAFETY ISSUE WITH NO EMERGENCY LIGHTS AND IF I HAD BEEN DRIVING AND VEHICLE WENT DEAD I WOULD HAVE HAD A CRASH.
This 2025 SUV X5 xDrive50e the hybrid battery will over heat in hot weather temperatures therefore the battery will not charge with the issued 110 plug in home charger. BMW was aware of this malfunction and never warned or recalled the information to customers. This vehicle will not allow climate control features to work because there is no charge on the battery as well. The vehicle can overheat and could shut down and this problem was never disclosed to customers. The vehicles were selling in 2024.
The SUV has been in the dealer service center twice. BMW includes a charging cable a dual 110v/220v intended to charge the car as it is a plug in hybrid. Per the dealer the charging cable and the car are working as intended however when plugged in it will loose charge not gain it. The problem with this is the car will not remote start/ pre-condition in the hot Arizona sun without the battery having a charge on it. The design is a heat pump which runs on battery not the ICE. The charger is not able to keep up with the electrical demand of the charging system while plugged into a 110v outlet even suppling up to 20A. There is no formal literature about the charging cable being unable to charge the battery when the temperature is more than 90 degrees outside. The dealers suggestion is to install a separate paid for 220v charger (-/+ $2,000). The safety issue is the car will not cool sufficiently for a child to be in the car.
My cross traffic warning system is inoperative. Dealer said the sensors are operating normally. This is a safety hazard.
The contact owns a 2025 BMW X5. The contact stated upon starting the vehicle, several unknown warning lights were illuminated. Additionally, the contact stated that there were twenty-one failure codes displayed on the infotainment system screen. The contact stated that upon starting the vehicle the following day, no warning lights were illuminated. The contact stated that a dealer mobile technician arrived to the residence, and the vehicle was driven to the dealer, where it was diagnosed that an improper coding of the electronic modules had caused the Digital Motor Electronics (DME) to not communicate. The contact was informed that the electronic modules needed to be recoded. The DME data was cleared, and the DME was reprogrammed. The vehicle was repaired. The manufacturer was not made aware of the failure. The failure mileage was approximately 3,165.
The contact owns a 2025 BMW X5. The contact stated upon starting the vehicle, several unknown warning lights were illuminated. Additionally, the contact stated that there were twenty-one failure codes displayed on the infotainment system screen. The contact stated that upon starting the vehicle the following day, no warning lights were illuminated. The contact stated that a dealer mobile technician arrived to the residence, and the vehicle was driven to the dealer, where it was diagnosed that an improper coding of the electronic modules had caused the Digital Motor Electronics (DME) to not communicate. The contact was informed that the electronic modules needed to be recoded. The DME data was cleared, and the DME was reprogrammed. The vehicle was repaired. The manufacturer was not made aware of the failure. The failure mileage was approximately 3,165.
Driving home on a two lane road that is joined by a side road at a 45degree angle. A woman ran the stop sign and suddenly appeared on my road right in front about 40-50 feet away. The BMW did not show any visual or audible warning and the forward collision mitigation system functioned in a substandard way not mitigating the crash into the woman’s drivers door. Damages amounted to 25.8k to my vehicle and took 48 days to repair at my local BMW dealer in Albany NY. BMW states to me that the system worked properly. If that was the case how come I had massive front end damage impacting about 30 mph. The BMW manual shows a frontal cross traffic intrusion and leads one to believe in the system. It is substandard and needs revision by BMW engineering.
Crash
Driving home on a two lane road that is joined by a side road at a 45degree angle. A woman ran the stop sign and suddenly appeared on my road right in front about 40-50 feet away. The BMW did not show any visual or audible warning and the forward collision mitigation system functioned in a substandard way not mitigating the crash into the woman’s drivers door. Damages amounted to 25.8k to my vehicle and took 48 days to repair at my local BMW dealer in Albany NY. BMW states to me that the system worked properly. If that was the case how come I had massive front end damage impacting about 30 mph. The BMW manual shows a frontal cross traffic intrusion and leads one to believe in the system. It is substandard and needs revision by BMW engineering.
Crash
Driving home on a two lane road that is joined by a side road at a 45degree angle. A woman ran the stop sign and suddenly appeared on my road right in front about 40-50 feet away. The BMW did not show any visual or audible warning and the forward collision mitigation system functioned in a substandard way not mitigating the crash into the woman’s drivers door. Damages amounted to 25.8k to my vehicle and took 48 days to repair at my local BMW dealer in Albany NY. BMW states to me that the system worked properly. If that was the case how come I had massive front end damage impacting about 30 mph. The BMW manual shows a frontal cross traffic intrusion and leads one to believe in the system. It is substandard and needs revision by BMW engineering.
Crash
The gloss finish of wood and metal on dashboard and center console along with glass prism gear and infotainment controller of these vehicles present significant visibility issues. These visibility issues manifest in reflections on the driver and passenger window glass in a manner that obscures side mirror visibility. The high gloss finish of the dashboard wood cause blinding reflections from the sunlight depending on positioning of the vehicle relative to the sun. The jewel-like glass of the gear selector and infotainment controller cause additional sunlight reflections which can blind the driver depending on the position of the vehicle relative to the sun.
Multiple issues with the software. 1. Since yesterday, [XXX] car failed to start with the message "software upgrade failed". Sitting like a brick now - engine doesn't start and can't get the car off parking mode. 2, Last week, the remote functions of the software as well as emergency call system stopped working. Called the local dealer BMW of North Canton on June 25, Ohio to check and fix and they scheduled it for Monday June 30. But car refused to start per point 1. 1. Couple of times got the message while driving that driver inability to drive detected and suddenly slowing down the car and veering it to a side. Transient actions. Took it to the dealership, supposedly a software bug was fixed but then the message flashed one more time recently. INFORMATION REDACTED PURSUANT TO THE FREEDOM OF INFORMATION ACT (FOIA), 5 U.S.C. 552(B)(6)
Multiple issues with the software. 1. Since yesterday, [XXX] car failed to start with the message "software upgrade failed". Sitting like a brick now - engine doesn't start and can't get the car off parking mode. 2, Last week, the remote functions of the software as well as emergency call system stopped working. Called the local dealer BMW of North Canton on June 25, Ohio to check and fix and they scheduled it for Monday June 30. But car refused to start per point 1. 1. Couple of times got the message while driving that driver inability to drive detected and suddenly slowing down the car and veering it to a side. Transient actions. Took it to the dealership, supposedly a software bug was fixed but then the message flashed one more time recently. INFORMATION REDACTED PURSUANT TO THE FREEDOM OF INFORMATION ACT (FOIA), 5 U.S.C. 552(B)(6)
Multiple issues with the software. 1. Since yesterday, [XXX] car failed to start with the message "software upgrade failed". Sitting like a brick now - engine doesn't start and can't get the car off parking mode. 2, Last week, the remote functions of the software as well as emergency call system stopped working. Called the local dealer BMW of North Canton on June 25, Ohio to check and fix and they scheduled it for Monday June 30. But car refused to start per point 1. 1. Couple of times got the message while driving that driver inability to drive detected and suddenly slowing down the car and veering it to a side. Transient actions. Took it to the dealership, supposedly a software bug was fixed but then the message flashed one more time recently. INFORMATION REDACTED PURSUANT TO THE FREEDOM OF INFORMATION ACT (FOIA), 5 U.S.C. 552(B)(6)
My 2025 BMW X5e was repaired under recall 24V‑104 for the integrated brake system. Before this recall, the vehicle did NOT have any braking hesitation or drag issues. After the recall repair was done (replacement and reprogramming), the vehicle now shows hesitation to move forward after releasing the brake pedal from a complete stop, as if the brakes are still dragging. This creates a safety concern when merging into traffic or driving in stop‑and‑go conditions. The dealer is unable or unwilling to resolve the issue. I am requesting NHTSA to investigate this recall fix as it may have introduced a new defect.
My 2025 BMW X5e was repaired under recall 24V‑104 for the integrated brake system. Before this recall, the vehicle did NOT have any braking hesitation or drag issues. After the recall repair was done (replacement and reprogramming), the vehicle now shows hesitation to move forward after releasing the brake pedal from a complete stop, as if the brakes are still dragging. This creates a safety concern when merging into traffic or driving in stop‑and‑go conditions. The dealer is unable or unwilling to resolve the issue. I am requesting NHTSA to investigate this recall fix as it may have introduced a new defect.
It has now been a year since i picked up my 2025 X5, and I STILL have not been able to get it repaired. My dealer informed me that there is still no remedy for me car. It has now been a year of me owning the car and driving around with a recall on my brakes. This is ridiculous. Not no mention the fact that when i picked up this car, there was already a recall on them that my dealer did not make me aware of. BMW sold me a car with a brake recall and still hasn’t fixed it after a year.