2024 BMW X5 Recalls, Complaints & Safety

Since buying the car new we have had a constant problem of the "emergency call system malfunction" on the dashboard. We've been to the dealer several times for this and each time they say they've fixed it. Last time they told us they had replaced the TCU module, but in the last month the warning has re-appeared. It seems to have affected the GPS now. While driving on the freeway the map was showing us a mile away on surface streets, giving us guidance such as "stop at the stop sign ahead and turn left".

The contact owns a 2024 BMW X5. The contact received notification of NHTSA Campaign Number: 24V104000 (Electronic Stability Control (ESC), Service Brakes, Hydraulic); however, the part to do the recall repair was not yet available. The contact stated that a message to complete the recall was displayed. The local dealer was contacted several times. The contact stated that the manufacturer had exceeded a reasonable amount of time for the recall repair. The manufacturer was not made aware of the issue. The contact had not experienced a failure.

I bought this car and started to have issues after a couple weeks. Because it is a hybrid model, it works perfectly fine when the car is running on the battery. Immediately the engine began to work, I get hesitation and the car drives rough. I took it to the first dealership that said there was water in the engine but they were proved wrong because what they show as water was apparently fuel that did not burn the right way in the cylinder. The dealership came with another excuse that the filter had traces of water which makes them to believe something was wrong. I took the car to another bmw dealership as I did not trust their diagnosis. The other bmw dealership performed some work on the car but then came to the conclusion that their hands were tied because of what the previous dealership reported to bmw north america. I called bmw north america and they told me to go back to the dealership after I had no success at the dealership. I believe this is a lemon case and also constitute a safety hazard because I nearly had an accident because the car switch from running on battery to combustion and immediately on the highway. The speed slows abruptly and car began to drive rough. I would appreciate any traction this can get from the board to resolve this with the manufacturer

Car's information system was giving error stating: "Urgent interior functionality check up. The driver restraint system of your vehicle is malfunctioning. There is an increased risk of injury in case of a collision." Took it to the BMW dealer, they shared this info: Cause: Read out faults found fault 930949 knee air bag drivers short to negative need to replace harnesses as per SIB 65-27-24. Correction: Replace harness for knee air bags. The estimate for this is $2,013.72 which breaks down to parts at $288.96 and 7 hours worth of labor costing $1,724.76. This car is two years old. I would assume this is a manufacturing defect happening at only two years of age.

The failure involves the Integrated Brake System, which is subject to a manufacturer issued safety recall, and related braking components including a wheel speed sensor that is part of the brake and stability control system. The vehicle is currently back in my possession and is available for inspection upon request. My safety and the safety of others were put at risk due to sudden and unpredictable loss of braking capability while driving, including abrupt deceleration and stopping in traffic, creating near collision situations. The issue has been reproduced multiple times and confirmed through repeated service visits, with the first and second recall related repairs performed at BMW of West Houston and a third repair attempt performed at BMW of Houston Midtown, following which the vehicle was returned to me. The vehicle has been inspected by authorized BMW dealerships and BMW North America has been notified, though I have not received guidance from corporate BMW regarding a plan moving forward or instructions on how to proceed should a fourth brake failure occur. Brake related warning lamps and system messages appeared following both the first and second recall repairs, and after the October 30, 2025 recall repair the vehicle experienced a brake system failure within approximately 22 miles of driving despite the presence of warning indicators. Given the repeated failures after recall repairs, the prior warning messages, and the lack of direction from BMW North America, I am concerned about operating the vehicle, particularly for longer distances, due to the unpredictable nature of the brake failures and the unresolved safety risk.

Three weeks ago the instrument cluster indicated a failure of the front collision avoidance system and said to have the vehicle examined by the dealer. I dropped it off two weeks ago and have been informed that they're having trouble updating the instrument panel and other component software. Other times the instrument panel would go dark for several seconds while driving. There is an open recall on X5 models produced from 01/24. Mine is not included as it was produced 11/23. Recall is 24V-138

The contact owns a 2024 BMW X5. The contact received notification of NHTSA Campaign Number: 24V104000 (Electronic Stability Control (ESC), Service Brakes, Hydraulic); however, the contact was informed that parts were not yet available. In addition, the contact stated that the parts for the recall repair had been unavailable for more than a year. The manufacturer was contacted; however, the contact was informed that the parts were not yet available. The contact had not experienced a failure.

The contact owns a 2024 BMW X5. The contact received notification of NHTSA Campaign Number: 24V104000 (ELECTRONIC STABILITY CONTROL (ESC), SERVICE BRAKES, HYDRAULIC); however, the part to do the recall repair was unavailable. The contact stated that the manufacturer had exceeded a reasonable amount of time for the recall repair. The manufacturer was made aware of the issue. The contact had not experienced a failure.

The contact owns a 2024 BMW X5. The contact stated that while driving at an undisclosed speed, the brake pedal was depressed; however, the vehicle failed to respond as intended. The contact stated that the vehicle failed to stop smoothly. No warning lights were illuminated. The contact stated that when the brake pedal was depressed, the brake pedal had an abnormal feeling. The vehicle was not diagnosed or repaired by an independent mechanic or dealer. The contact received notification of NHTSA Campaign Number: 24V104000 (Electronic Stability Control (ESC), Service Brakes, Hydraulic); however, the parts were not yet available. The dealer was made aware of the failure; however, the contact was informed that parts were on back order. The contact stated that the dealer was contacted several times; however, the contact was informed each time that the parts were on back order. The contact stated that the parts had been unavailable for more than a year. The manufacturer was made aware of the failure but provided no assistance. The contact was advised to contact the NHTSA Hotline to report the failure. The failure mileage was approximately 1,000.

The contact owns a 2024 BMW X5. The contact received notification of NHTSA Campaign Number: 24V104000 (ELECTRONIC STABILITY CONTROL (ESC), SERVICE BRAKES, HYDRAULIC); however, the part to do the recall repair was not yet available. The contact stated that the manufacturer had exceeded a reasonable amount of time for the recall repair. The manufacturer was made aware of the issue. The contact had not experienced a failure.

2024 BMW X5 with 22k miles, leasing the vehicle. Had the vehicle in the dealer, Herb Chambers BMW of Boston a few months ago to fix a brake recall and change the oil. Dealer said they fixed both, and also said they needed the vehicle all day to fix the brakes, so they got me an Uber and then dropped off the vehicle when it was completed. Fast forward to today, October 2, 2025. Drive train warning came up when driving the vehicle, told to find a safe place to stop, within 10 seconds the vehicle lost most of engine power. Was able to stop in a safe location, contacted roadside assistance, numerous warnings came up on screen. Roadside assistance said to start and stop the vehicle and this cleared the message, said that vehicle was safe to drive, it was probably just a sensor issue that put the vehicle into some type of safe mode (what a horrible thing to do, an enormously unsafe as the operator should determine this). Two days later, another drive train warning and the vehicle on it's own moved the transmission into neutral while driving at 30mph. This issue with going into neutral on it's own, I found out through speaking with my wife, that this happened a couple of week prior as well. I called road side assistance and had the vehicle towed, called the dealer to get a loaner as this vehicle is not safe to drive in it's current condition. After this issue, I looked my vehicle up by VIN and saw that the brake recall wasn't fixed yet to my surprise. When I spoke to the dealer today as the vehicle was being towed there with this drive train issue, I said were my brakes for this recall fixed, they said the software issue was fixed, but not the mechanical issue. I said please fix this brake recall while in there looking at this drive train issue. Vehicle is clearly not safe to drive in this condition, and you can use your imagination if this happened while driving at highway speeds or various other scenarios, not good at all.

The car suddenly dead in the intersection when driving the car, then can’t start the car, can’t shift the gear, stay in neutral position all the time. A message came out staying “Brake problem “! After around 20 minutes, system messaged us “problem solved, OK to drive “, so we were able to start the engine and start driving as normal. I called Service center let them know the scenario but got no answer. After 4 days same problem reoccurring again, this time car dead during left turn, fortunately no car hit our car (we were having 2 babies in the car). A lot of messages showed up, still mentioned “Brake problems “, and after 15-20 minutes, message us again - “Problem solved, ok to drive “. We have AAA tow the car to BMW service center later since we didn’t feel the message was reliable. The service center identified the problem and replaced the Mechatronics Control Unit and returned the car to us after 7 days. I am concerned about the car’s system message, it’s mentioned “Problem solved, OK to drive “, the message could misleading and have been fatal if we continued driving the vehicle to freeway. After we got vehicle back we were still very cautious about the car. I sent my concern to New Central BMW Alhambra CA about one month ago -to the service manager and requested a written explanation of why this faulty message occurred and how BMW engineer plans to prevent this from happening again. But there was no answer so far. There were a “Brake problem recall” and a “Emission Recall “for this vehicle and we went through the procedure already before these 2 brake problems.

My BMW X5 has a recall on the braking system that was sent to me on October 2024 and still nothing has been done about it yet, the dealer always says it's not available yet, I believe this problem should be fixed by now and wonder if BMW will ever fix this problem, I believe they have had enough time to correct this. [XXX] , [XXX] INFORMATION REDACTED PURSUANT TO THE FREEDOM OF INFORMATION ACT (FOIA), 5 U.S.C. 552(B)(6)

The contact owns a 2024 BMW X5. The contact received notification of NHTSA Campaign Number: 24V104000 (Electronic Stability Control (ESC), Service Brakes, Hydraulic); however, the part to do the recall repair was not yet available. The contact stated that the manufacturer had exceeded a reasonable amount of time for the recall repair. The dealer was made aware of the issue and confirmed that parts were not yet available. The manufacturer was made aware of the issue and confirmed that parts were not yet available. The contact had not experienced a failure.

Since purchasing the car new, the check engine light has come on repeatedly (probably about ten times in 2+ years). I believe it’s related to the electric charging components. This seems to be a known and unresolved problem with this model. BMW has refused to replace the vehicle or even acknowledge that this is a known problem, even though I paid almost 90K for the car. They just expect me to take it to the dealership every couple of month. I told them I want to trade in the car and asked how they intend to stand behind their defective product, and I have heard nothing in return. The check engine light is currently on since the most recent software update.

The Integrated Brake System and Dynamic Safety Control both malfunctioned, not turning on. The car is totaled, so I don't think anything is available for inspection. There was water on the highway, and the car ended up going off the road into the grass and rolled over a few times before landing at the bottom of the ditch 100ft away. The car was not inspected because I was not aware of the major recall until I started looking into it. There was a snapshot of the DTC codes two weeks before the incident and there were codes specifically for the IB system as noted in the recall. There may have been one or two times throughout driving the car beforehand that a error light popped up, but then it disappeared almost immediately after.

Crash 1 injured

A car from the other side made an illegal left turn in front of me, and I braked very early, yet still slid into them. The car had been inspected at the time at the collision center, and had DTC codes from before repair and after repair, showing the Integrated Brake systems had failures before and after. There was no mention of the results of the inspection until I asked after another braking incident occurred two weeks later. There were moments where a light would pop up for a second, then disappear. It may have happened only once.

Crash

A car from the other side made an illegal left turn in front of me, and I braked very early, yet still slid into them. The car had been inspected at the time at the collision center, and had DTC codes from before repair and after repair, showing the Integrated Brake systems had failures before and after. There was no mention of the results of the inspection until I asked after another braking incident occurred two weeks later. There were moments where a light would pop up for a second, then disappear. It may have happened only once.

Crash

The Integrated Brake System and Dynamic Safety Control both malfunctioned, not turning on. The car is totaled, so I don't think anything is available for inspection. There was water on the highway, and the car ended up going off the road into the grass and rolled over a few times before landing at the bottom of the ditch 100ft away. The car was not inspected because I was not aware of the major recall until I started looking into it. There was a snapshot of the DTC codes two weeks before the incident and there were codes specifically for the IB system as noted in the recall. There may have been one or two times throughout driving the car beforehand that a error light popped up, but then it disappeared almost immediately after.

Crash 1 injured

A car from the other side made an illegal left turn in front of me, and I braked very early, yet still slid into them. The car had been inspected at the time at the collision center, and had DTC codes from before repair and after repair, showing the Integrated Brake systems had failures before and after. There was no mention of the results of the inspection until I asked after another braking incident occurred two weeks later. There were moments where a light would pop up for a second, then disappear. It may have happened only once.

Crash

The Integrated Brake System and Dynamic Safety Control both malfunctioned, not turning on. The car is totaled, so I don't think anything is available for inspection. There was water on the highway, and the car ended up going off the road into the grass and rolled over a few times before landing at the bottom of the ditch 100ft away. The car was not inspected because I was not aware of the major recall until I started looking into it. There was a snapshot of the DTC codes two weeks before the incident and there were codes specifically for the IB system as noted in the recall. There may have been one or two times throughout driving the car beforehand that a error light popped up, but then it disappeared almost immediately after.

Crash 1 injured

The contact owns a 2024 BMW X5. The contact received notification of NHTSA Campaign Number: 24V104000 (ELECTRONIC STABILITY CONTROL (ESC), SERVICE BRAKES, HYDRAULIC); however, the part to do the recall repair was unavailable. The contact stated that the manufacturer had exceeded a reasonable amount of time for the recall repair. The manufacturer was made aware of the issue. The contact had not experienced a failure.

The contact owns a 2024 BMW X5. The contact stated that after receiving the notification of NHTSA Campaign Number: 24V104000 (ELECTRONIC STABILITY CONTROL (ESC), SERVICE BRAKES, HYDRAULIC); the contact was informed that parts were still not available for the recall repair. The local dealer and manufacturer were notified of the failure. The contact had not experienced a failure related to the recall.

Test DSC hydronic unit. Drive carefully! Take to your nearest dealer! Brake booster malfunction on recall but my vin number doesn’t show up on recall

The contact owns a 2024 BMW X5. The contact stated that after receiving the notification of NHTSA Campaign Number: 24V104000 (ELECTRONIC STABILITY CONTROL (ESC), SERVICE BRAKES, HYDRAULIC); the contact was informed that parts were still not available for the recall repair. The local dealer and manufacturer were notified of the failure. The contact had not experienced a failure related to the recall.

The contact owns a 2024 BMW X5. The contact received notification of NHTSA Campaign Number: 24V104000 (ELECTRONIC STABILITY CONTROL (ESC), SERVICE BRAKES, HYDRAULIC); however, the part to do the recall repair was unavailable. The contact stated that the manufacturer had exceeded a reasonable amount of time for the recall repair. The manufacturer was made aware of the issue. The contact had not experienced a failure.

I have had an open recall for BRAKING since February 12. Both BMW USA and my local deal say they cannot or will not fix the issue. Again, this is for braking. BMW USA has not responded to multiple emails. I no longer feel safe driving this vehicle. It is on a lease and I wish to terminate the lease with no penalty.

I have recently experienced sudden phantom braking on my vehicle on three separate occasions, following a recall on a brake module that was taken care of at the dealer. Each time this happened at highway speed for no apparent reason. The dealer, BMW of Buffalo has had the car for over a week without finding the problem. They have been in constant touch with corporate, trying to diagnose this. No luck! I will not drive this Vehicle, nor can I in good conscie nce trade it in to another dealer. I could be held liable. I'm wondering what you may have on record since there are reports on the web of similiar occurances

The drive train failed on the car and left the car without power as the transmission disengaged and was revving in drive mode. This happened when I was making a right turn. Oncoming traffic had to dodge us making it a very dangerous situation. The shoulder was narrow so half of the car in the number one lane. The car had been back into the dealership many time for similar issue but this time the car actual hard warning signs flash on the screen and loss complete power and maneuverability. A few different lights came on the dash. Prior to the car completely shutting down, the car would down shift really hard and the computer says the car was trying to go in reverse. I’ve loss all confidence in this car and feel unsafe getting back into it.

There has been no incident. This safety recall was issued on February 2024. BMW is still unable, or unwilling, to provide the parts to remedy this safety recall.

On [XXX], while my 2024 BMW X5 was parked and stationary in an uncovered lot in Fort Lee, NJ, a large crack suddenly formed on the windshield. The crack originated at the top edge and extended approximately 8 inches. There was no impact observed, and the windshield had no prior chips or damage. The vehicle was exposed to sustained outdoor temperatures near 100°F for multiple consecutive days due to an extreme heat dome over the region. I suspect a thermal stress fracture possibly related to glass quality or installation. This type of failure raises safety concerns about the structural integrity of the glass. I have contacted BMW and am awaiting their response. INFORMATION REDACTED PURSUANT TO THE FREEDOM OF INFORMATION ACT (FOIA), 5 U.S.C. 552(B)(6)

On July 23, 2025, at around 10:50 AM, shortly after leaving my community and driving onto a main road, my BMW X5 suddenly experienced what felt like an emergency braking event and completely lost power. I was driving at approximately 40 mph when this happened. It caused surrounding vehicles to honk and make sudden maneuvers to avoid a collision, creating a dangerous situation. I was extremely frightened and shocked, and for a moment I panicked because there were cars all around me. With the help of a friend and my family, I contacted BMW Roadside Assistance. It took nearly five hours before my vehicle was finally towed about nine miles away to the Irvine BMW dealership for service. This incident has caused me extreme emotional distress, sleeplessness, and serious concerns about the safety and quality of the vehicle. I am seeking help and an official investigation into this issue.

The contact owns a 2024 BMW X5. The contact received notification of NHTSA Campaign Number: 24V104000 (Electronic Stability Control (ESC), Service Brakes, Hydraulic); however, the part to do the recall repair was not yet available. The contact stated that the message "Stop, the vehicle will be turning off" was displayed on the instrument panel. The local dealer was contacted. The contact stated that the manufacturer had exceeded a reasonable amount of time for the recall repair. The manufacturer was not made aware of the failure. The failure mileage was approximately 15,000. VIN tool confirms parts not available.