2018 FORD EXPLORER

The contact owns a 2018 Ford Explorer. The contact received notification of NHTSA Campaign Number: 24V031000 (Structure); however, the part to do the recall repair was not yet available. The contact stated that while his wife was driving at highway speeds, the front passenger’s side A-pillar trim detached. The local dealer was contacted about the failure, and the contact was informed that parts were not yet available. The contact stated that the manufacturer had exceeded a reasonable amount of time for the recall repair. The manufacturer was made aware of the failure and informed the contact that the vehicle could be repaired out of pocket; however, the contact declined to pay out-of-pocket for the repair. The vehicle was not repaired. The failure mileage was approximately 60,000.

The contact owns a 2018 Ford Explorer. The contact received notification of NHTSA Campaign Number: 26V101000 (Suspension); however, the part to do the recall repair was not yet available. The local dealer was made aware of the issue and confirmed that parts for the recall repair were on back order. The contact called other dealers nearby and was provided the same information. The contact stated that the manufacturer had exceeded a reasonable amount of time for the recall repair. The manufacturer was made aware of the issue. The contact had not experienced a failure.

After replacing the newest recall for the rear toe link on my Explorer, I’ve noticed (along with a couple others on some forums) that the alignment does not stay set and will come undone. I finished driving 1000 miles after the swap and had sudden pressure loss in my rear tire. When I looked at it the entire outside of the tire on both driver and passenger side were completely eaten through and I’m not made of enough money to keep replacing tires and keep getting alignments done. I do have a video of my inside cam of when it happened if requested.

After replacing the newest recall for the rear toe link on my Explorer, I’ve noticed (along with a couple others on some forums) that the alignment does not stay set and will come undone. I finished driving 1000 miles after the swap and had sudden pressure loss in my rear tire. When I looked at it the entire outside of the tire on both driver and passenger side were completely eaten through and I’m not made of enough money to keep replacing tires and keep getting alignments done. I do have a video of my inside cam of when it happened if requested.

In 2025 the dashboard leather on our 2018 Ford Explorer Platinum began to come unglued and rolled apart creating a very distracting white strip. This is very distracting and reflects into our line of sight. We have taken to the Ford dealership for repair. And the only answer from them is Go to an upholstery shop or replace the full dashboard… Very expensive!! We have researched and discovered that this is a regularly reported problem on Reddit and other sites for Ford Explorers and Expeditions from 2018-2020. These SUVs are not cheap! We paid a lot of money for a luxury SUV and this is not acceptable. But Ford isn’t interested because they don't see it as the safety danger it really is. The exposure of the white matting underneath the leather creates a vision safety problem looking out the windshield. Pictures attached. We are asking for assistance in getting Ford to address and repair this problem. At the very least it is a quality control problem on their luxury SUVs that Ford should be fixing.

The contact owns a 2018 Ford Explorer. The contact received notification of NHTSA Campaign Number: 24V031000 (Structure); however, the part to do the recall repair was not yet available. The contact stated that while driving approximately 65 MPH, the front passenger’s side A-pillar trims detached. Several local dealers were contacted on several occasions. The contact stated that the manufacturer had exceeded a reasonable amount of time for the recall repair. The manufacturer was not made aware of the failure. The failure mileage was approximately 60,000.

While driving at an undisclosed speed, I noticed an abnormal buzzing sound coming from the windshield. I have noticed that there have been several complaints regarding that issue. Also, there was a strange smell coming inside the vehicle.

Received Safety Recall 26S08 about rear suspension toe link. However, the new toe link design Ford provided as a remedy only fixes the breakage issue, but it is known to be "inadjustable" and causing control issues from the recall on previous model years. The new toe link will lose alignment within 6 months, and causing early wore out on rear tires. It looks like Ford's remediation is only fixing one issue to create another one. A lot of owners are switching to aftermarket toe links which helps to stabilize the control.

The contact owns a 2018 Ford Explorer. The contact received notifications of NHTSA Campaign Numbers: 24V031000 (Structure) and 26V101000 (Suspension); however, the parts to do the recall repairs were unavailable. The contact stated that the manufacturer had exceeded a reasonable amount of time for the recall repairs. The dealer was contacted and confirmed that parts were not yet available for the recall repairs. The manufacturer was not made aware of the issues. The contact had not experienced a failure.

The contact owns a 2018 Ford Explorer. The contact received notifications of NHTSA Campaign Numbers: 24V031000 (Structure) and 26V101000 (Suspension); however, the parts to do the recall repairs were unavailable. The contact stated that the manufacturer had exceeded a reasonable amount of time for the recall repairs. The dealer was contacted and confirmed that parts were not yet available for the recall repairs. The manufacturer was not made aware of the issues. The contact had not experienced a failure.

The contact owns a 2018 Ford Explorer. The contact stated that the VIN was associated with NHTSA Campaign Number: 26V101000 (SUSPENSION). The contact stated that while driving at an undisclosed speed, the vehicle failed to accelerate as intended while depressing the accelerator pedal, and the transmission seized. The contact stated that the vehicle failed to move forward or reverse(R) as needed. No warning light was illuminated. The vehicle was towed to the residence. The dealer was contacted; however, the vehicle was not taken to the dealer or an independent mechanic. The vehicle was not repaired. The contact called a transmission specialty shop. The vehicle was not inspected or diagnosed. The vehicle remained at the residence and had not been driven since. The manufacturer was not made aware of the failure. The failure mileage was approximately 92,000.

The contact owns a 2018 Ford Explorer. The contact stated that while her son was driving over a bridge, the A-pillar trim detached and fell off the vehicle, causing another vehicle to swerve to avoid the trim and sideswipe another vehicle. Additionally, the front windshield started to leak shortly after the A-pillar trim detached and fell off. The contact related the leaking to the missing A-pillar trim. The contact referenced NHTSA Campaign Number: 24V031000 (Structure). The dealer was notified of the failure and confirmed that the VIN was associated with the recall; however, the failure did not occur because of the loss of the A-pillar trim. The manufacturer was not notified of the failure. The approximate failure mileage was 60,000.

The contact owns a 2018 Ford Explorer. The contact received notifications of NHTSA Campaign Numbers: 24V031000 (STRUCTURE) and 26V101000 (SUSPENSION); however, the parts to do the recall repair were not yet available. The contact stated that while driving 40 MPH, the passenger's side A-pillar trim detached from the vehicle. The local dealer was contacted and confirmed that the recall repairs were not available. The contact stated that on a separate occasion, the driver’s side A-pillar trim became loose. The local dealer was not contacted. The vehicle was not repaired after the most recent failure. The contact stated that the manufacturer had exceeded a reasonable amount of time for the recall repair. The manufacturer was not made aware of the issue. The contact had not experienced a failure with the suspension. The dealer advised the contact that the part to do the recall repair was not yet available. The failure mileage was approximately 50,000.

The contact owns a 2018 Ford Explorer. The contact received notifications of NHTSA Campaign Numbers: 24V031000 (STRUCTURE) and 26V101000 (SUSPENSION); however, the parts to do the recall repair were not yet available. The contact stated that while driving 40 MPH, the passenger's side A-pillar trim detached from the vehicle. The local dealer was contacted and confirmed that the recall repairs were not available. The contact stated that on a separate occasion, the driver’s side A-pillar trim became loose. The local dealer was not contacted. The vehicle was not repaired after the most recent failure. The contact stated that the manufacturer had exceeded a reasonable amount of time for the recall repair. The manufacturer was not made aware of the issue. The contact had not experienced a failure with the suspension. The dealer advised the contact that the part to do the recall repair was not yet available. The failure mileage was approximately 50,000.

Horn stopped working. Airbag indicator will not reset. Took to local dealership but their service department doesn’t seem to find an active recall for this, even though I can see them listed, just not for my particular VIN number

Horn stopped working. Airbag indicator will not reset. Took to local dealership but their service department doesn’t seem to find an active recall for this, even though I can see them listed, just not for my particular VIN number

The contact owns a 2018 Ford Explorer. The contact received notification of NHTSA Campaign Number: 24V031000 (Structure); however, the part to do the recall repair was unavailable. The contact stated that the manufacturer had exceeded a reasonable amount of time for the recall repair. The contact stated that the A-pillar trim was beginning to detach from the windshield, allowing outside air to enter the vehicle. While in reverse, the back over prevention camera displayed a distorted image, or a solid blue screen without an image. The failure occurred several times while shifting into reverse. The dealer was contacted and confirmed that the part was not available yet available for the recall. The VIN was not under recall for the back-over prevention camera. The manufacturer was not made aware of the failure. The failure mileage was 78,896.

The contact owns a 2018 Ford Explorer. The contact received notification of NHTSA Campaign Number: 24V031000 (Structure); however, the part to do the recall repair was unavailable. The contact stated that the manufacturer had exceeded a reasonable amount of time for the recall repair. The contact stated that the A-pillar trim was beginning to detach from the windshield, allowing outside air to enter the vehicle. While in reverse, the back over prevention camera displayed a distorted image, or a solid blue screen without an image. The failure occurred several times while shifting into reverse. The dealer was contacted and confirmed that the part was not available yet available for the recall. The VIN was not under recall for the back-over prevention camera. The manufacturer was not made aware of the failure. The failure mileage was 78,896.

My 2018 Ford Explorer continues to have issues with the rear back up camera. It makes it difficult to see while backing, especially at night. I have noticed recalls concerning this very problem on Ford Explorers with a recall on this very issue beginning with 2020 models. My vehicle is experiencing the sale malfunction. We called Ford a couple of times about the issue, and their response was, summarized, “Sorry, it is not under the recall and there is nothing for us (Ford) to do.” I feel sure that I am not the only pre-2020 ford explorer owner to have this wide spread problem. It should be included in the recall. Thank you.

The contact owns a 2018 Ford Explorer. The contact received notification of NHTSA Campaign Number: 24V031000 (Structure). The contact became aware in 2025 that the driver’s and passenger’s sides A-pillar trims were loose. The contact called several dealers to set up a recall appointment, but was informed that the part was not available for the recall repair. The contact stated that the manufacturer had exceeded a reasonable amount of time for the recall repair. The manufacturer was not informed of the failure. The failure mileage was approximately 81,000.

The trim on my 2018 Ford explorer is almost completely detached now if this causes an accident and somebody were to possibly die due to this faulty, trim clip coming off on the road then that’s a big problem. It needs to be fixed immediately when you buy a beautiful vehicle like this there’s no reason the trim on the vehicle should be falling apart my guess it’s a very easy part to have manufactured and it’s been years so let’s start getting up and doing something about it.

The contact owns a 2018 Ford Explorer. The contact stated that while driving 35 MPH over a bump on a snowy road, there was an abnormal popping sound coming from the rear suspension, and the contact lost control of the vehicle. The contact stated that upon decelerating to 5 MPH, the contact was able to regain control of the vehicle and to pulled over to the side of the road. The vehicle was towed to the residence. The contact noticed that the rear driver's side tire was folded inward. The vehicle was towed to an independent mechanic, where it was diagnosed, and determined that the driver's side rear suspension toe link was fractured and needed to be replaced. The contact stated that the part was replaced; however, the rear suspension was making an abnormal squeaking sound while driving. The vehicle was not repaired. The contact became aware that the VIN was recently included in NHTSA Campaign Number: 26V101000 (Suspension), which the contact associated with the failure. The dealer and the manufacturer were not contacted. The failure mileage was approximately 110,000.

Upon startup rough idle and check engine light came on. Mechanic confirmed cylinder head thinning causing fluid leak into first cylinder. A mechanical note verifies but Ford won't issue a recall. Apparently Ford has know this for years with Ecoboost engines. I don't want to become a victim of vehicle dying in the middle of traffic. Have seen several complaints from Ford owners with no fixes by Ford.

Entertainment system control. Power draws down and kills battery. Display locks into reverse camera, and I can't access any controls for extended periods of time. Display just locks, and I can't adjust anything in it. This seems to be a known issue for all Sync 3 based backends.

Fuel system evap leak just like the Safety Recall 18S35

The contact owns a 2018 Ford Explorer. The contact stated that while driving at an undisclosed speed, the check engine warning light illuminated. Prior to the failure, when the vehicle was started, there was an abnormal sound coming from the engine. After several minutes, the sound ceased. The vehicle was taken to an independent mechanic who diagnosed the vehicle with a misfire in cylinder #3. The contact was informed that the spark plug was stuck, and the independent mechanic was unable to remove the spark plug. The contact stated that while driving at an undisclosed speed, the check engine warning light illuminated. The vehicle was taken back to the independent mechanic. The vehicle was diagnosed with a misfire in cylinder #3, and the spark plug and ignition coil were replaced. The contact was unsure if the stuck spark plug was removed the second time the vehicle was repaired. Most recently, the contact noticed that while the vehicle was in park(P) and left running, the vehicle was idling roughly. The message "Engine Coolant Over Temperature" was intermittently displayed. The contact pulled over to the side of the road, left the vehicle running, exited the vehicle, opened the hood, and there was no smoke or steam present. The contact returned to the vehicle and noticed that the temperature gauge was indicating that the engine was HOT. The contact drove back to the residence. The vehicle was taken to the dealer, where it was diagnosed with coolant intrusion in cylinders #1, #2, and #4. The contact was informed that the coolant reservoir was empty, that the spark plug in cylinder #3 was stuck, and that the engine needed to be replaced. The vehicle was not repaired. The contact took the vehicle to an independent mechanic for a second opinion, who diagnosed coolant intrusion in cylinders #1, #2, and #4, and that the spark plug was stuck in cylinder #3. The vehicle was not repaired due to the cost. The dealer notified the manufacturer of the failure. The failure mileage was approximately 118,000.

The contact owns a 2018 Ford Explorer. The contact received notification of NHTSA Campaign Number: 24V031000 (STRUCTURE); however, the part to do the recall repair was unavailable. The local dealer was contacted, and it was confirmed that the part was not available. The contact stated that the manufacturer had exceeded a reasonable amount of time for the recall repair. The manufacturer was made aware of the issue. The contact stated that the A-pillar trim was ejected from the vehicle on both the passenger’s and driver’s side of the vehicle. The failure mileage was unknown.

See attached document for complaint. I am in receipt of your multiple Important Safety Recall notices/letter and am very upset with your company. I keep receiving these recall notices/letters and I call the Ford Dealer to set up an appointment and they tell me the part is not available. This has been going on for over a year!!!! If this is a safety recall then why is it not important enough to service my vehicle?!!!

The contact owns a 2018 Ford Explorer. The contact received notification of NHTSA Campaign Number: 24V031000 (Structure); however, the part to do the recall repair was not yet available. The contact stated while driving at various speeds, there was air entering the vehicle through the front driver’s side A-pillar trim. No warning light was illuminated. The local dealer was contacted on several occasions; however, parts were not yet available for the recall repair. The vehicle was not diagnosed or repaired. The manufacturer was made aware of the failure. The failure mileage was approximately 69,000.

The contact owns a 2018 Ford Explorer. The contact stated that after the vehicle was idling at a traffic stop, the vehicle failed to accelerate as intended while depressing the accelerator pedal. The check engine warning light illuminated. The contact pulled over to the side of the road and turned off the vehicle. The vehicle was restarted; however, the vehicle stalled after driving several minutes. The vehicle was towed to an independent mechanic who diagnosed the vehicle with engine failure and determined that the engine needed to be replaced. The vehicle was not repaired due to the cost. The vehicle remained with the independent mechanic unrepaired. The manufacturer was not made aware of the failure. The approximate failure mileage was 162,000.

The contact owns a 2018 Ford Explorer. The contact stated that while driving at an undisclosed speed, there was a whistling sound coming from the front windshield. The contact stated that the trim had detached and flown off the vehicle, and there was a constant rattling sound coming from the windshield. The vehicle was taken to the dealer, where the contact was informed about an open recall on the VIN. The contact was informed that parts were not yet available. An alternate dealer was contacted, and the contact was informed that parts were not yet available. The contact later received notification of NHTSA Campaign Number: 24V031000 (Structure); however, the parts were not available. The manufacturer was not made aware of the failure. The failure mileage was approximately 45,000.

The contact owns a 2018 Ford Explorer. The contact received notification of NHTSA Campaign Number: 24V031000 (Structure); however, the part to do the recall repair was not yet available. The local dealer was contacted. The contact stated that the manufacturer had exceeded a reasonable amount of time for the recall repair. The manufacturer was not made aware of the issue. The contact had not experienced a failure.

Right front caliber went out at 47,186 miles in 11/14/2025. No abs sensor went on alerting me to the problem. Had it fixed. Two months later, 1/05/2026, at 47,620 miles later, the control HCU and module ABS went out. Again, no sensor alerting me to a problem. I could hardly drive it. Had Ford look at it, assess the problem, and had to drive home due to another cost. Could have been on the highway when this occurred. Was in town, but was an awful experience! Brakes locked up on me!

The manufacturer has not remedied the repair of a recall within a timely manner. I am scheduled to ship my vehicle overseas, which requires all recalls to be addressed. Manufacturer Recall Number24S02 (NHTSA Recall Number24V031)

The contact owns a 2018 Ford Explorer. The contact received notification of NHTSA Campaign Number: 24V031000 (Structure); however, the part to do the recall repair was not yet available. The local dealer was not contacted. The manufacturer was not made aware of the issue. The contact stated that the manufacturer had exceeded a reasonable amount of time for the recall repair. The contact had not experienced a failure.

I am filing a safety complaint regarding unresolved recalls on my 2018 Ford Explorer (VIN: [XXX] ). FIRST RECALL: Over two years ago, I was notified to repair the exterior A-pillar trim/window shields. The dealer in Yakima, WA, placed me on a waiting list and said the part was unavailable. I have been waiting over two years with no resolution. Recently, while driving on the highway, this part fell off and struck the windshield of another vehicle behind me, creating a dangerous situation and potential for serious injury. The dealer refused to repair it for free, stating I must either wait longer or purchase the part myself, despite this being a manufacturer safety recall. This long delay and refusal put my safety and the safety of others at risk. It also caused stress, confrontation, and concern for my financial obligations, as I continue paying for a vehicle with unresolved safety defects. SECOND RECALL: The high-speed cooling fan motor relay recall was not properly addressed. The dealer only started the vehicle, stated the fan worked, and performed no inspection or repair, leaving a potential hazard unresolved. FORD RESPONSE: I reported these incidents to Ford Customer Service, but they said the situation did not qualify for opening a case. I strongly disagree, as these are confirmed safety recalls and one part already failed during driving. ADDITIONAL CONCERNS: I am still making monthly payments for this vehicle while unresolved recalls continue to appear. The ongoing failure to repair these defects, despite multiple reports, creates financial and safety burdens. I request NHTSA to investigate these matters, require Ford to complete all recall repairs properly, and hold the dealer accountable for their refusal to provide free safety repairs in a timely manner. Thank you. INFORMATION REDACTED PURSUANT TO THE FREEDOM OF INFORMATION ACT (FOIA), 5 U.S.C. 552(B)(6)

During a storm, our SUV had water leaking in through the top, middle of the windshield. The water soaked the dashboard controls and our heating/air system was stuck on high heat and would not turn off. It was 70° and it was extremely hot in the SUV and the windows kept fogging up making it hard to see. Our temperature controls no longer work properly.

During a storm, our SUV had water leaking in through the top, middle of the windshield. The water soaked the dashboard controls and our heating/air system was stuck on high heat and would not turn off. It was 70° and it was extremely hot in the SUV and the windows kept fogging up making it hard to see. Our temperature controls no longer work properly.

I am filing a safety complaint regarding unresolved recalls on my 2018 Ford Explorer (VIN: [XXX] ). FIRST RECALL: Over two years ago, I was notified to repair the exterior A-pillar trim/window shields. The dealer in Yakima, WA, placed me on a waiting list and said the part was unavailable. I have been waiting over two years with no resolution. Recently, while driving on the highway, this part fell off and struck the windshield of another vehicle behind me, creating a dangerous situation and potential for serious injury. The dealer refused to repair it for free, stating I must either wait longer or purchase the part myself, despite this being a manufacturer safety recall. This long delay and refusal put my safety and the safety of others at risk. It also caused stress, confrontation, and concern for my financial obligations, as I continue paying for a vehicle with unresolved safety defects. SECOND RECALL: The high-speed cooling fan motor relay recall was not properly addressed. The dealer only started the vehicle, stated the fan worked, and performed no inspection or repair, leaving a potential hazard unresolved. FORD RESPONSE: I reported these incidents to Ford Customer Service, but they said the situation did not qualify for opening a case. I strongly disagree, as these are confirmed safety recalls and one part already failed during driving. ADDITIONAL CONCERNS: I am still making monthly payments for this vehicle while unresolved recalls continue to appear. The ongoing failure to repair these defects, despite multiple reports, creates financial and safety burdens. I request NHTSA to investigate these matters, require Ford to complete all recall repairs properly, and hold the dealer accountable for their refusal to provide free safety repairs in a timely manner. Thank you. INFORMATION REDACTED PURSUANT TO THE FREEDOM OF INFORMATION ACT (FOIA), 5 U.S.C. 552(B)(6)

During a storm, our SUV had water leaking in through the top, middle of the windshield. The water soaked the dashboard controls and our heating/air system was stuck on high heat and would not turn off. It was 70° and it was extremely hot in the SUV and the windows kept fogging up making it hard to see. Our temperature controls no longer work properly.

I am filing a safety complaint regarding unresolved recalls on my 2018 Ford Explorer (VIN: [XXX] ). FIRST RECALL: Over two years ago, I was notified to repair the exterior A-pillar trim/window shields. The dealer in Yakima, WA, placed me on a waiting list and said the part was unavailable. I have been waiting over two years with no resolution. Recently, while driving on the highway, this part fell off and struck the windshield of another vehicle behind me, creating a dangerous situation and potential for serious injury. The dealer refused to repair it for free, stating I must either wait longer or purchase the part myself, despite this being a manufacturer safety recall. This long delay and refusal put my safety and the safety of others at risk. It also caused stress, confrontation, and concern for my financial obligations, as I continue paying for a vehicle with unresolved safety defects. SECOND RECALL: The high-speed cooling fan motor relay recall was not properly addressed. The dealer only started the vehicle, stated the fan worked, and performed no inspection or repair, leaving a potential hazard unresolved. FORD RESPONSE: I reported these incidents to Ford Customer Service, but they said the situation did not qualify for opening a case. I strongly disagree, as these are confirmed safety recalls and one part already failed during driving. ADDITIONAL CONCERNS: I am still making monthly payments for this vehicle while unresolved recalls continue to appear. The ongoing failure to repair these defects, despite multiple reports, creates financial and safety burdens. I request NHTSA to investigate these matters, require Ford to complete all recall repairs properly, and hold the dealer accountable for their refusal to provide free safety repairs in a timely manner. Thank you. INFORMATION REDACTED PURSUANT TO THE FREEDOM OF INFORMATION ACT (FOIA), 5 U.S.C. 552(B)(6)

[XXX] ur complaint I can't figure out where one files a complaint on an outstanding recall. Ford keeps sending notices, but is obviously not serious about fixing the issue, as its been going on approaching 3 years. If you call their hotline, it cuts you off after entering the recall number, saying there's no available fix at the moment. However, by searching some dealers around the nation, the parts are out there to purchase, but our two local dealers say they've seen nothing and advise using two sided tape in the meantime. How can such a basic part be so difficult to have available in under 2 - 3 years time? Our pillar piece has been barely hanging on for almost 2 years. INFORMATION REDACTED PURSUANT TO THE FREEDOM OF INFORMATION ACT (FOIA), 5 U.S.C. 552(B)(6) INFORMATION REDACTED PURSUANT TO THE FREEDOM OF INFORMATION ACT (FOIA), 5 U.S.C. 552(B)(6)

The contact owns a 2018 Ford Explorer. The contact received notification of NHTSA Campaign Number: 24V031000 (Structure) however, the part to do the recall repair was not yet available. The local dealer was contacted and confirmed that the remedy was not available. The contact stated that the manufacturer had exceeded a reasonable amount of time for the recall repair. The manufacturer was made aware of the issue and confirmed that the remedy was not yet available. The contact had not experienced a failure.

The displayed view by the back up camera flickers, or shows a blue screen when the car is placed in reverse. This places the safety of pedestrians at risk of being hit by the vehicle when backing up. This places the safety of other drivers and myself at risk of collision when backing up. The component (back up camera) was inspected by a Ford dealer (Sunrise Ford in Fort Pierce Fl.). I was charged $199 to run diagnostics on the camera. They found that the camera had an internal fault, vision blurry and suggest replacing camera at a charge of $1145. I was told that the existing recalls do not cover my VIN. I contacted Ford customer care to see if my VIN was covered under the announced 15 year warranty for backup camera replacement. Although 2016 - 2025 Ford explorers was listed as being eligible for replacement, I was told my VIN was not included. Ford customer care opened up case number CXH-06550938-R6D9Q3 to investigate the problem. The problem started about 6 months ago and only happened once in a while then the camera would work as intended. Now the problem occurs 90% of the time the car is placed in reverse.

My 2018 Ford Explorer sport had a recall on the luggage rack. The railing on top it was repaired. In twenty one, but the repairer didn't hold the relling, flew off on the passenger side and driver's side is about to fly off.And my local four dealer has changed hands.So they're refusing to repair it again.So recall clips felled, so what do I do

The contact owns a 2018 Ford Explorer. The contact received notification of NHTSA Campaign Number: 24V031000 (Structure); however, the part to do the recall repair was unavailable. The contact stated that the manufacturer had exceeded a reasonable amount of time for the recall repair. The manufacturer was made aware of the issue. The contact had not experienced a failure.

- I have experienced a sudden loss of engine power and speed on 5 occasions. Very scary and dangerous to completely lose power on the highway with cars behind you. Had to pull off onto the shoulder(s) in dangerous conditions, with two young kids in the backseat. Hazards, turn off the car, restart the car, etc. - When the power loss happens, the vehicle's dashboard lights turn on, including the engine and wrench icons along with the words "See Manual." - Based on my research, I believe it may be due to a defective throttle body and/or software, related to the "terrain management system." - Problem was not reproduced or confirmed by a dealer or independent service center - No inspections by the manufacturer, police, insurance representatives or others - No warning message is provided prior to the failure, which is another issue

My VIN was removed for the A Pillar recall. I received no notice as to why and my car was inspected a year ago. At that time the problem was not present. It is present now, but for some reason, my VIN has been removed. I would like to know under what conditions it was removed and by whom.

2018 Leather on dashboard shrinks pulled away from the glue. Causes a safety hazard while driving.

- I have experienced a sudden loss of engine power and speed on 5 occasions. Very scary and dangerous to completely lose power on the highway with cars behind you. Had to pull off onto the shoulder(s) in dangerous conditions, with two young kids in the backseat. Hazards, turn off the car, restart the car, etc. - When the power loss happens, the vehicle's dashboard lights turn on, including the engine and wrench icons along with the words "See Manual." - Based on my research, I believe it may be due to a defective throttle body and/or software, related to the "terrain management system." - Problem was not reproduced or confirmed by a dealer or independent service center - No inspections by the manufacturer, police, insurance representatives or others - No warning message is provided prior to the failure, which is another issue