Technical Service Bulletins
Search 172,063 manufacturer communications covering 879 vehicle makes from 1955 to 2025.
Showing 225 bulletins for ALTEC
CSR-3155
Apr 12, 2024
050000 PARKING BRAKE
Altec Industries, Inc. has received notification from Ford Motor Company that a condition exists relating to motor vehicle safety, compliance, or emissions in certain vehicles that are equipped with Altec equipment. On certain 2023-2024 F65
PUN-3134
Mar 22, 2024
350000 EQUIPMENT
In January 2023, Altec made production changes to the LR8 leveling yoke retention assembly. The upgraded system includes a shoulder bolt and lock nut. The shoulder bolt and lock nut can be removed and reused and have a higher shear strength
SIL-3112
Mar 15, 2024
350000 EQUIPMENT
Altec has learned that on certain digger derricks built from January 29, 2015, to December 3, 2020, equipped with a Hetronic radio control system have experienced frequent dropouts or would not connect to the receiver. When the remotes were
SIL-3136
Mar 5, 2024
350000 EQUIPMENT
Altec has learned that a retaining ring was not installed on the capstan shaft of certain cable tensioning trailers built from June 2017 to June 2023. This could result in the capstan detaching from the motor on the affected units.
SIL-3117
Feb 7, 2024
160000 STRUCTURE
Altec has learned that insufficient clearance between the outrigger leg(s) and feeder tube(s) on certain LS63 and LS87 units built from September 2021 to February 2023 can cause outrigger interference. This can affect the outrigger's abilit
CSR-3146
Feb 2, 2024
010000 STEERING
Altec Industries, Inc. has received notification from Ford Motor Company that a condition exists relating to motor vehicle safety, compliance, or emissions in a vehicle you possess that is equipped with Altec equipment. On certain 2023 mode
SIL 3129
Jan 26, 2024
350000 EQUIPMENT
Altec has learned that the cap screws used to mount the planetary winch at the turntable could be shorter than specified on certain D3000A/B and D4000A/B units built from January 2012 to December 2015.
SIL-3125
Jan 17, 2024
350000 EQUIPMENT
Altec Industries, Inc. has issued a customer satisfaction campaign as described in the Service Information Letter (SIL). Altec has updated the preventive maintenance procedures for the boom tip pin retaining plate on certain A Class and A C
CSR-3138
Jan 9, 2024
060000 ENGINE AND ENGINE COOLING
Altec Industries, Inc. has received notification from Ford Motor Company that a condition exists relating to motor vehicle safety, compliance, or emissions in a vehicle you possess that is equipped with Altec equipment. On certain 2022 mode
CSR 3139
Dec 30, 2023
030000 SERVICE BRAKES, HYDRAULIC
Altec Industries, Inc. has received notification from Navistar that a condition exists relating to motor vehicle safety, compliance, or emissions in a vehicle you possess that is equipped with Altec equipment. Navistar has issued Recall 235
SIL 3128
Dec 28, 2023
090000 FUEL SYSTEM, OTHER
Altec has learned that certain AH model aerial devices built from September 2022 to November 2023 could have loose PTO and/or pump mounting fasteners. Loose fasteners could lead to leaks, damage to components, and unit downtime.
SIL 3105
Dec 21, 2023
350000 EQUIPMENT
Altec has learned that the affected units may have incorrect fittings installed at the lower control station manifold block. Incorrect fittings can allow air into the hydraulic system. The presence of air in the hydraulic system will cause
SIL 3123
Dec 7, 2023
350000 EQUIPMENT
Altec has learned that Section 9 of the Maintenance and Parts Manual for Certain AC45E cranes built from September 2020 to November 2023 contains an incorrect torque value of 250 foot-pounds (339 Na??m) for the rotation gearbox mounting cap
SIL 3100
Nov 30, 2023
350000 EQUIPMENT
Altec has learned that the boom rest flanges can become damaged during transportation or stowing of the boom on certain AC40E units built from September 2022 to June 2023. This can result in damage to the boom.
SIL 3065
Nov 28, 2023
350000 EQUIPMENT
Altec has learned that the pressure plates in the reel motor were not manufactured to specification, causing the plates to stick together. This can cause the reel park brake to not fully release, or cause the reel motor to lock up on certai
SIL 3119
Nov 22, 2023
350000 EQUIPMENT
Altec has learned that an incorrect grade auger retention pin could be installed on certain DC, DL, and DM derricks built from July 2015 to August 2023. Over time, this could result in the pin becoming damaged.
SIL 3108
Nov 14, 2023
160000 STRUCTURE
Altec has learned that on certain AT41M aerial devices built from April 27, 2023, to June 24, 2023, the curb side chassis frame rail was drilled in a location that does not conform with the chassis manufacturera??s recommendation. The unit
CSR-3127
Nov 6, 2023
110000 ELECTRICAL SYSTEM
Altec Industries, Inc. has received notification from Navistar that a condition exists relating to motor vehicle safety, compliance, or emissions in certain vehicles equipped with Altec equipment. Navistar has decided certain 2021 thru 2024
SIL 3099
Oct 31, 2023
020000 SUSPENSION
Altec has learned that on certain Altec units equipped with air suspension built from April 2020 to June 2023, some operators may be dumping the chassis airbags before deploying the outriggers. This can cause the airbags to become damaged.
CSR 3118
Oct 30, 2023
100000 POWER TRAIN
Altec Industries, Inc. has received notification from Ford Motor Company that a condition exists relating to motor vehicle safety, compliance, or emissions in a vehicle that is equipped with Altec equipment. Certain 2024 and 2025 model year
CSR 3121
Oct 23, 2023
100000 POWER TRAIN
Altec Industries, Inc. has received notification from Fiat Chrysler Automobiles (FCA) that certain 2022 model year (DD) Ram 3500 cab chassis, (DP) Ram 4500/550 cab chassis, (D2) Ram 3500 pickup trucks equipped with an AISIN transmission cou
SIL 3110
Sep 27, 2023
350000 EQUIPMENT
Altec learned that a connection in the upper controls joystick in certain OEM Controls on AT238P aerial devices built from November 2020 to August 2022 can fail due to wire movement during use and issued SIL-845 to re-manufacture controller
SIL 3066
Sep 22, 2023
110000 ELECTRICAL SYSTEM
Altec has learned that operators might be using the crane and unit simultaneously on certain Altec units equipped with Venturo, Liftmoore, and Autocrane service cranes built from March 2009 to August 2022. These units were designed for sing
SIL 3077
Sep 19, 2023
110000 ELECTRICAL SYSTEM
Altec has learned that the Samlex inverter default threshold on certain units built from August 2022 to April 2023 may not be able to accommodate the 110 power accessories at the platform. This can result in the operator being unable to use
CSR 3109
Aug 22, 2023
060000 ENGINE AND ENGINE COOLING
Altec Industries, Inc. has received notification from Ford Motor Company that a condition exists relating to motor vehicle safety, compliance, or emissions in a vehicle you possess that is equipped with Altec equipment. Certain 2020 to 2022