Technical Service Bulletins
Search 172,063 manufacturer communications covering 879 vehicle makes from 1955 to 2025.
Showing 225 bulletins for ALTEC
SIL 856
Jun 22, 2022
350000 EQUIPMENT
Altec has learned of the potential for washers on the outer race rotation bearing cap screws to overlap the adjacent weld on AT238P and AT335 aerial devices built from October 2019 to November 2021. While there have been no reports of unit
CSR 540
Jun 13, 2022
100000 POWER TRAIN
Altec Industries, Inc. has received notification from an Original Equipment Manufacturer (OEM) that a condition exists relating to motor vehicle safety, compliance, or emissions in a vehicle you possess that is equipped with Altec equipment
SIL 850
May 3, 2022
110000 ELECTRICAL SYSTEM
The body compartment wiring on certain Altec aerial devices, digger derricks, and body-only units built from 2014 to 2021 contains an in-line fuse located close to the lighting in the compartment, while other units are fused upstream, close
SIL 843
Apr 29, 2022
350000 EQUIPMENT
Altec has learned that the lift cylinder pivot pin retainers may bend or break during use on DT80 digger derricks built from March 2007 to October 2021. If the pin retainer fails, the pivot pin will still be held in place in the turntable o
SIL 852
Apr 27, 2022
350000 EQUIPMENT
Altec has learned that the electrohydraulic outrigger/tools control valve on AA755L and A-series aerial devices and DLB, DMB, and D2/3/4000B series digger derricks could have the potential to produce a very small amount of flow into the low
SIL 845
Apr 20, 2022
110000 ELECTRICAL SYSTEM
Altec has learned that a connection in the upper controls joystick on AT238P aerial devices built from November 2020 to September 2021 can fail due to wire movement during use. If this happens with the boom elevated, the operator in the pla
SIL 848
Apr 13, 2022
060000 ENGINE AND ENGINE COOLING
Altec has learned that the engine on certain AT35/37/40G and AT37/41/48 ME/PE aerial devices built from August 2020 to August 2021 on Ford F-450/F550/F-600 gas engine chassis equipped with a JEMS S/SE hybrid system could not enter idle miti
CSR 533
Apr 11, 2022
160000 STRUCTURE
Altec Industries, Inc. has been notified by Hiab that an update exists for certain Effer models with a safety screw at the extension cylinder. This relates to the operation or customer satisfaction of the unit. Hiab has updated the inspecti
CSR 537
Apr 1, 2022
010000 STEERING
Altec Industries, Inc. has received notification from Ford Motor Company that a condition exists relating to motor vehicle safety, compliance, or emissions in a vehicle you possess that is equipped with Altec equipment. Ford Motor Company
CSR 536
Apr 1, 2022
130000 VISIBILITY
Altec Industries, Inc. has received notification from Fiat Chrysler Automobiles (FCA) that a condition exists relating to motor vehicle safety, compliance, or emissions in a vehicle you possess that is equipped with Altec equipment. FCA US
CSR 539
Apr 1, 2022
070000 FUEL SYSTEM, GASOLINE
Altec Industries, Inc. has received notification from an Original Equipment Manufacturer (OEM) that a condition exists relating to motor vehicle safety, compliance, or emissions in a vehicle you possess that is equipped with Altec equipment
CSR 538
Apr 1, 2022
070000 FUEL SYSTEM, GASOLINE
Altec Industries, Inc. has received notification from an Original Equipment Manufacturer (OEM) that a condition exists relating to motor vehicle safety, compliance, or emissions in a vehicle you possess equipped with Altec equipment. Cummi
PUN 2021E
Mar 25, 2022
160000 STRUCTURE
Altec has developed gauges to facilitate the inspection for bearing wear on the upper boom drive mechanism walking links on All LRIV, LRV, LR7, LR8, and MT66-E76 aerial devices. Kits are now available containing a gauge and instructions for
CSR 532
Mar 18, 2022
050000 PARKING BRAKE
Altec Industries, Inc. has received notification from Navistar that a condition exists relating to motor vehicle safety, compliance, or emissions in a vehicle you possess that is equipped with Altec equipment. On certain trucks equipped
CSR 531
Mar 18, 2022
050000 PARKING BRAKE
Altec Industries, Inc. has received notification from Navistar that a condition exists relating to motor vehicle safety, compliance, or emissions in a vehicle you possess that is equipped with Altec equipment. On certain trucks equipped
CSR 528
Feb 25, 2022
060000 ENGINE AND ENGINE COOLING
Altec Industries, Inc. has received notification from an Original Equipment Manufacturer (OEM) that a condition exists relating to motor vehicle safety, compliance, or emissions in a vehicle you possess that is equipped with Altec equipment
CSR 530
Feb 16, 2022
080000 FUEL SYSTEM, DIESEL
Altec is committed to providing our customers reliable products from initial delivery throughout the useful life of the machine. Ford Motor Company has decided that a defect that relates to motor vehicle safety exists in certain 2021 mod
SIL 844
Feb 7, 2022
350000 EQUIPMENT
Altec has learned that there could be loose, missing, or incorrectly installed mounting fasteners on the electric power take-off (ePTO) on certain aerial devices built from 2015 to 2020 and equipped with a JEMS 18E20 hybrid system. This can
CSR 529
Feb 3, 2022
020000 SUSPENSION
Altec Industries, Inc. has received notification from an Original Equipment Manufacturer (OEM) that a condition exists. This condition relates to the operation or customer satisfaction of the unit when equipped with an Altec aerial device o
SIL 841
Jan 18, 2022
162000 STRUCTURE:BODY
Altec has learned that on certain derricks built from 2008 to 2020 the diameter of the wire winch rope installed may exceed the maximum allowable diameter specified by the ANSI A10.31 derrick standard based on the winch drum diameter. Use
PUN 2021F
Jan 6, 2022
210000 TRAILER HITCHES
Altec has learned that after the Load Trail Revision A trailers used with TDA58 aerial devices built from September 2014 to June 2016 are updated according to CSN 821, the clearance between the rear of the operator-selected tow vehicle and
CSR 527
Nov 30, 2021
060000 ENGINE AND ENGINE COOLING
Fiat Chrysler Automobiles US has decided that a defect that relates to motor vehicle safety exists on certain 2021 through 2022 model year (DJ) Ram 2500 pickup, (D2) Ram 3500 pickup, (DD) Ram 3500 cab chassis, and (DP) Ram 4500/5500 cab cha
SIL 839
Nov 30, 2021
100000 POWER TRAIN
Some customers have reported the loss of functionality of the Altec unit or the EZ Trac system on certain 2016-2021 Ford F750 chassis with EZ Trac hydraulic all-wheel drive installed. The investigation has shown that improper wiring could h
SIL 830
Nov 5, 2021
350000 EQUIPMENT
Some customers have reported hose carrier failure and/or cover damage occurring during the operation of LS60 aerial devices built from January 2017 to May 2020. Altec has developed an improved design of the hose carrier tray and cover syste
PUN 2021D
Nov 3, 2021
110000 ELECTRICAL SYSTEM
Altec has learned that the labeling describing the proper jump starting procedure for certain vehicles equipped with a Jobsite Energy Management System (JEMS) 2, 4, 6, or 12 built by Altec from 2015 to 2021 has sometimes been overlooked. Fa