2016 CHRYSLER 300 Recalls, Complaints & Safety

The contact purchased a 2016 Chrysler 300. The contact stated that shortly after purchasing the vehicle, the vehicle was taken to a dealer for several repairs, and the contact was concerned that there was a mileage discrepancy as per a Carfax Report. The vehicle was a dealer sale. At the time of purchase, the mileage was 117,338; however, the Carfax Report indicated that the mileage was 156,268 in February 2017. The Carfax Report also stated that the odometer had previously been tampered with in 2017 and indicated a mileage of 5,093 instead of 7,542. The contact stated that currently the approximate mileage was 166,801.

Notified by repair shop that my vehicle is experiencing identical problems with the fuel rail and fuel injector that was recalled for Mercedes in my class and year, but the dealer says my VIN is not applicable currently. Recall campaign number is 2022030003 and NHSTSA ID is 21V961. Was informed by dealer to call customer care at Mercedes, and subsequently informed by Mercedes to fill out this form.

The oil filter housing w/sender unit leaks oil under the upper intake plemun. The oil filter Chrysler installed in the vehicle is plastic.

Fuel pump lid is electrical connection is cause a malfunction when fuel up and burning a hole in the electrical connection causing fuel to leak out under the back seat this need to be fix before someone is killed do to a fire this is the 2n time being replace and the same issue

When gas tank is filled with more that 3/4 of a tank of gas, fumes are very strong within the vehicle and around it. This continues until the gas tank has less than 3/4 of a tank of gas. There is a recall for the evap canister on my year, make and model...but my VIN is not included.

1- Electrical components lost communication with all module I have diagnostic from dealer. 2- When happened car loose power putting my own safety and other at risk I don’t feel safety no more and all possible lights on dashboard come on. 3- I bring my car to dealer to do a diagnostic and said need change whole car harness, at time that dealer check 68 DYC was show, before happening to me twice and brin to shop close to my house one time has 85 DTC and second time 63 DTC I have diagnostic copy from dealer and from shop. 4- Dealer diagnosed my car. 5- It happened suddenly not warning at all when happened have to stop as soon as I can turn off engine and wait some minutes and turn on again after that engine light come on all the time and car can driving again. 6- Also a year ago on march last year my car was updated from Uconnect and a corrupt file from them damaged my radio they have to install a new radio with new software update for this reason at Uconnect expense, don’t know if this is related to this new problem that I have now, also send you the diagnostic at that time.

Have been having power steering problems over the past few years. Started by displaying a shift to park message while driving, my car would then lose power and shut down completely and power steering would lock up. Have taken to dealerships and independent mechanics and was told it was the wiring harness which they repaired several times and the car continued to have the issue. Approximately 3 months ago I was driving 55mph on highway when suddenly without any warning, the power steering failed and locked up making it very difficult to turn the wheel to get the vehicle off the highway safely. The power steering locking up put myself, my passengers and other drivers at risk bc I had no control over the steering. When I got the vehicle off of the highway a message repeatedly coming on and off saying “service power steering “ and another message saying power steering assist off service system. I was able to get the vehicle home, however the steering was extremely difficult especially in turns which is a major safety concern increasing a risk of an accident. I have done a lot of research about this issue and have found that there are numerous others with the same issue and same make/model as my 2016 Chrysler 300 C. I took the vehicle to another independent mechanic and they told me they couldn’t figure out what is wrong with it. I made another appointment with another mechanic and when I attempted to drive it “manually” as I had to do when it initially started doing this, the electric power steering has now completely locked up and the wheel is not functional at all and power steering has completely failed. This is not only a huge inconvenience but a serious safety hazard and should be investigated by the manufacturer.

The contact's son owns a 2016 Chrysler 300. The contact stated that the horn was inoperable. Additionally, the contact stated while her son was driving 60-65 MPH, the vehicle lost power steering functionality inadvertently. There was no warning light illuminated. The contact stated that the driver was able to veer to the side of the road. The contact stated that the driver turned off and restarted the vehicle, and the power steering became functional. The contact stated that the driver was able to drive to the residence. The vehicle was taken to an independent mechanic, where the failure could not be duplicated, and the contact was referred to the dealer. The dealer was contacted, and an appointment was scheduled for a diagnostic test. The vehicle was not diagnosed or repaired. The manufacturer was not notified of the failure. The failure mileage was approximately 31,000.

oil filter housing, oil pulled to back of engine creating hole, all oil leaked out.

Main Fuel Pump and accompanied electrical connect. The fuel pump and electrical wiring harness is available upon request. My safety was at risk due to a faulty electrical connection inside the fuel tank. My vehicle made a loud hmming sound at a stop sign, upon continuing forward the vehicle shut off randomly. Upon inspection, the fuel was not sending to the engine. We bought a new fuel pump and replaced at the side of the road. When inspecting the OEM fuel pump and accompanied electrical connection, we noticed over heated wiring and melts plastic inside the fuel tank on the underside of the fuel pump, as well as burnt connections on the outside of the fuel tank on the tip side of the fuel pump. We have pictures to support. No warning signs, signals, or lights were present at the time of failure. When purchasing new fuel pump, there were no instructions for replacement of electrical connections. The only indication we found as to what was happening was through public forums online, showing the electrical wiring was faulty and needed replacing with the alternative wiring harness due to wiring (hot wire, b+) being located too close to the grounding wiring causing it to burn amd/or arch creating a problem with which could cause fire and explosion. No information was readily available nor have we received any information on potential catastrophic injury or failure.

The contact owns a 2016 Chrysler 300. The contact stated while driving at an undisclosed speed, he heard an abnormal clicking sound coming from the engine compartment. No warning lights were illuminated. The vehicle was taken to an independent mechanic, who diagnosed failures with the connecting rod bearings and hydraulic roller lifters. The vehicle was not repaired. The manufacturer was not notified of the failure. The failure mileage was 180,000. The VIN was not available.

Door panels are separating from all interior doors. Separating has caused issues with doors locking and airbag deployment. This is an issue the manufacturer has been aware of for years yet still manufactures cars with this issue. Chrysler and Dodge vehicles. Issue is so common that replacement parts, which are not covered by manufacturer's warranty and can cost anywhere from $1000+ per door, are backordered.

The bolts were loose on the driveshaft on the all-wheel-drive, which caused them to have to replace the entire driveshaft! If the driveshaft would’ve broke, whoever was driving the vehicle, whether it be me, or with my son in it, we would’ve wrecked and possibly died! The problem has been confirmed with a certified dealer! There is no warning signals. There was nothing and there is a recall on the same. There is a recall for the exact same problem as my car, and now they will not cover it because it doesn’t show up on the Vin! This is a very dangerous safety issue and Chrys learning to address this as soon as possible! Especially after one of their managers told me it would be paid for if I had a diagnosed with a certified dealer and now they’re saying they’re not paying for it

The contact's daughter owns a 2016 Chrysler 300. The contact stated that the back-over prevention camera displayed a distorted image while in use. The contact stated that an unknown dealer was notified of the failure. The manufacturer was not notified of the failure. The vehicle was not repaired. The failure mileage was approximately 103,000.

The door molding on the passenger side is now over 1 inch pulled away from the window because of heat. The door molding may cause issues when/if the airbags are deployed. Now two other doors are having the same issue but not as large of a gap between the window and molding.

The contact owns a 2016 Chrysler 300. The contact stated while driving at an undisclosed speed, the power train warning light illuminated. The contact stated that when she arrived at her destination and proceeded to park the vehicle, the gear shifter was inoperable. The contact stated that she waited for several minutes, and the gear shifter became operable, and she was able to safely park the vehicle. The contact stated that the failure occurred previously, and the gear shifter was replaced but the failure reoccurred. The vehicle was not diagnosed or repaired by an independent mechanic or dealer. The manufacturer was not made aware of the failure. The failure mileage was approximately 130,000.

PASSENGER DOOR PANEL WARPING. LARGE GAP BETWEEN PANEL AND WINDOW. THIS WILL EVENTUALLY AFFECT THE WINDOW FUNCTIONING, AS WELL AS THE AIR BAG. THIS IS DANGEROUS AND CAN BE LIFE THREATENING.

The contact owns a 2016 Chrysler 300. The contact stated that water was leaking from the rear passenger’s side of the vehicle. Additionally, the contact stated that the window trim on the rear driver's side door had detached. The vehicle was not diagnosed or repaired by an independent mechanic or dealer. The manufacturer was not made aware of the failure. The approximate failure mileage was 40,000.

Door panels are separating from interior passenger door. Separating has caused issues with doors locking and airbag deployment. This is an issue the manuafaturer has been aware of for years yet still manufatures cars with this issue. Chrysler and Dodge vehicles. Issue is so common that replacement parts, which are not covered by manufacturers warranty and can cost anywhere from $1000+ per door, are backordered. http://www.chryslerproblems.com/300-warped-door-panels/ https://www.300cforums.com/threads/2016-chrysler-300-door-panels.277838/ https://www.carcomplaints.com/Chrysler/300/2016/accessories-interior/ https://www.motorbiscuit.com/a-lawsuit-accuses-dodge-of-failing-to-repair-defective-charger-models/ https://www.carcomplaints.com/news/2021/chrysler-warped-door-panel-lawsuit-party-dismissed.shtml https://www.chargerforums.com/threads/interior-door-panels-peeling-lifting-on-newer-dodge-chargers-update-class-action-lawsuit-active.387463/page-7 https://www.carcomplaints.com/news/2020/chrysler-300-dodge-charger-door-panels-coming-off.shtml

Both front door panels severely warped to the point of Cracking and causing the door locks to bind and to also cause the possibility that side air bags may not deploy as designed or deploy prematurely. Warranty and Extended Warranty refused repair claims citing manufacturer defects. Repair estimate over $2000.

Unknown, plastic around window frame is popping off. I believe it to be due to heat however was advised it may cause side air bag deployment issues. After googling I found this to be a known issue

I was sitting at a stop light waiting to make a left turn when the electrical power steering randomly failed. This issue made it near impossible to turn the car and caused me to almost crash into a light pole when I tried to make the left turn. I then made an attempt to turn into a parking lot to get off the road almost causing me to wreck the car a second time. I have been told by multiple mechanics that this electrical power steering failure is not a common issue with newer vehicles. I want to submit this claim to make it known this make and model has this issue

ABS system failed. Front axel disconnected and now needs replaced along with both CV boots. It is now effecting the Carrier Barring (Drive shaft)

Door panel warped, causing issue with side air bag deployment. Chrysler has known of this issue and refuses to issue recall

Passenger front heated seat for no apparent reason began smoldering and two small burn holes came through the seat cushion. Vehicle was parked at the time and the ignition was off, and the car was unoccupied. this incident was reported to Chrysler and the car was taken to a dealer for inspection. The inspector's report indicated that this was not caused by a manufactures defect and told me to contact my insurance company. I do not agree with these findings and think that this matter should be investigated further as a dangerous fire might occur.

Fire

Started to smell gas inside the car .StepOneAutomotive Crysler diagnosed the problem as a fuel module.Turns out ,another shop found the gas leak under the rear seat,top left fuel pump and seal.Still smells like gas.Feel unsafe for me and my family.

The contact owns a 2016 Chrysler 300. The contact stated that while driving at 65 MPH, an abnormal sound was coming from the vehicle. The vehicle was taken to the dealer and diagnosed that the driveshaft had loosened. The driveshaft needed to be replaced. The vehicle was repaired. The manufacturer was made aware of the failure and informed the contact to pay the deductible and diagnostic fee. The failure mileage was 49,642.

The contact owns a 2016 Chrysler 300. The contact stated while the vehicle parked, she noticed that the interior door was separating from the door frame showing the padding on the front and rear driver’s and passenger’s side doors. The contact took the vehicle to a local dealer to have the vehicle inspected. The contact was informed that the sun or the heat had warped the parts connected to the door panels. The dealer recommended that the door panels be replaced. The contact was concerned that replacing the panels with the same type of panels would result in the same kind of failure. The vehicle was not repaired. The manufacturer was made aware of the failure. The failure mileage was approximately 50,000.

My door panels are peeling away from the area where the trim and window meet on my driver side and passenger. Upon research, I've discovered this is an issue going back ever since 2014 with Chrysler and Dodge vehicles Upon further research, this issue can lead to issues with side air bags not being able to possibly be deployed (I have not experienced this),driver & passenger window being affected by heating and cooling of the AC (I've experienced this with my windows not being able to adequately defrost fast enough, as well as my windshield), and issues with the doors automatic locks not locking. Hundreds of thousands of Chrysler & Dodge owners have experienced this and evidence can be found online, especially in forums - in particular Mopar Forums and Reddit. My vehicle hasn't been inspected by Police, Insurance, Manufacturer in particular to this issue, as I've discovered there's nothing can be done since I'm out of warranty and refuse to pay for this. No warning lamps of that nature have illuminated. This has been an issue since late 2018, early 2019 for me. I've owned my vehicle since May 2018.

Door panels Peeling away at the seams . Doors won't lock properly and Reports of it affecting side airbags. This is happening on all 4 doors of my vehicle.

We purchased the vehicle and after we purchased the vehicle we noticed that the odometer was 85,453 on the contract on 04/20/2021 and we had gotten the Carfax report on 05/10/2021 and in 2016 the odometers reading was 86,960 so we decided to have the further looked at for warranties at Viva Dodge Chrysler and the odometer was 88,521 miles

Took my car to the dealer to have the fuel pump replaced. Car was repaired and picked up only to have it returned for a fuel leak complaint. Dealership said there was no leak nor evidence of a leak, however, the car is leaking fuel. After my experience I searched for any information on this topic and found others that have had a similar issue with the repair/complaint. This has not been resolved after a call to the dealership owner.

WHEN ENGAGING THE TURN SIGNAL (PARTICULARLY LEFT TURNS) THE WINDSHIELD WIPERS ENGAGE. HAVE ATTEMPTED "WIGGLING" THIS COMBINATION CONTROL LEVER, WHICH HAS A SMALL DEGREE OF PLAY WITHIN ITS RANGES OF MOTION. SOMETIMES THIS IS EFFECTIVE, BUT USUALLY THIS IS NOT. HAVE ALSO ATTEMPTED POSITIONING THE "PLAY" LEVEL TO EACH OF ITS NATURAL LIMITS. OCCASIONALLY THIS WORKS, BUT WITHIN A FEW TURN CYCLES IT REVERTS BACK TO ENGAGING THE WIPERS. VEHICLE IS IN MOTION WHEN THIS HAPPENS, MAKING A TURN. THIS HAS BEEN OCCURRING FOR OVER A YEAR.