2017 GMC YUKON XL

Engine stalling, a rough-running engine, reduced power mode (sluggish acceleration), a "Check Engine" light, or the vehicle failing to start. It started puttering really bad and died in the middle of the intersection. Check engine light came on. I got it to start, was really hard start and puttered bad then it died again and then I got it to start again, was a really hard start and puttered and died again. I was able to start it again get in the driveway but couldn’t go very fast. Check engine codes present are P2635 and P018B

Transmission problems, loss of power. Put a reader on car and said it was a selinoid. Replaced that and now it has happened again

Gear slippage, loss of power

The contact owns a 2017 GMC Yukon XL. The contact stated that the check engine warning light was illuminated. The contact stated that while idling, the vehicle started shuddering violently. The contact stated that while driving to the residence at an undisclosed speed, the vehicle stalled and failed to restart. The vehicle was pushed into a church parking lot. The contact's father used a scanner to scan the vehicle, and a DTC for engine misfire was retrieved. The contact's father replaced the spark plugs, but the failure persisted. The vehicle was towed to an independent mechanic, where it was diagnosed and determined that the engine was blown. The vehicle was then towed to another independent mechanic, where the engine was replaced. Additionally, the contact stated that upon depressing the brake pedal, the brake pedal was stiff and required to be pumped several times for the vehicle to respond as intended. The contact stated that the failure occurred while starting the vehicle and while driving at various speeds. There was no warning light illuminated. The contact stated that the brakes had been replaced annually, but the failure persisted. The contact stated that the brake pedal shuddered upon starting the vehicle. The contact received a notification for ABS from the OnStar Mobile App. The vehicle was not repaired. The manufacturer was not notified of the failure. The failure mileage was approximately 148,246.

The contact owns a 2017 GMC Yukon XL. The contact stated that the check engine warning light was illuminated. The contact stated that while idling, the vehicle started shuddering violently. The contact stated that while driving to the residence at an undisclosed speed, the vehicle stalled and failed to restart. The vehicle was pushed into a church parking lot. The contact's father used a scanner to scan the vehicle, and a DTC for engine misfire was retrieved. The contact's father replaced the spark plugs, but the failure persisted. The vehicle was towed to an independent mechanic, where it was diagnosed and determined that the engine was blown. The vehicle was then towed to another independent mechanic, where the engine was replaced. Additionally, the contact stated that upon depressing the brake pedal, the brake pedal was stiff and required to be pumped several times for the vehicle to respond as intended. The contact stated that the failure occurred while starting the vehicle and while driving at various speeds. There was no warning light illuminated. The contact stated that the brakes had been replaced annually, but the failure persisted. The contact stated that the brake pedal shuddered upon starting the vehicle. The contact received a notification for ABS from the OnStar Mobile App. The vehicle was not repaired. The manufacturer was not notified of the failure. The failure mileage was approximately 148,246.

On July 3, 2025 we were traveling on a 4 lane at 55mph. Without any prior symptoms, the vehicle began to shake violently. It shook so hard that the skid warning light simultaneously came on. It was followed by the check engine light. The oil pressure guage started bouncing around. We stopped driving the vehicle and had it towed to VanYork GMC dealer in Asheboro, NC on this same day. (Invoice attached) VanYork GMC determined that cyclinder 5 was misfiring. We paid to have them repair it, and we began driving the vehicle again. (invoice attached) On or about August 1, 2025 we were traveling on an interstate at 70mph. Without any forewarning, the vehicle began to violently shake. Just as before, the skid warning light simultaneously came on, followed by the check engine light came on, and then the oil pressure guage started bouncing around. As there was heavy traffic on the interstate, the failure created a very dangerous situation for us as we tried to maintain our lane, and stay in control of the vehicle until which time we were able to safely maneuver to the side of the road. The vehicle was again towed to Vann York GMC in Asheboro, NC. (invoice attached) On December 3, 2025 we received a call from VannYork GMC saying that the vehicle repairs were complete. It had been in their repair shop for 4 months. This repair began with lifter and camshaft replacement. When this repair was unsuccessful, they decided that the vehicle needed a 'new' rebuilt engine. Since GMC has not offered any assistance with the expense of this new re-built engine, we will have to satisfy the $12,000 bill when we pick it up. After experiencing two very dangerous episodes, we are happy that we did not wreck, but certainly, this not the situation we expected from a high-end vehicle with only 76,169 miles on it.

At stop light vehicle began to sputter, run rough, and make noise. I was less than a mile from my home, no check engine light on. I turned the vehicle off, used a scanner to have codes P0106 and P0506 show. I had vehicle towed to Complete Car Care. Misfire on multiple cylinders, 3 push rods bent, one valve spring broken. The right Cylinder head assembly had to be removed and replaced with 8 new push rods, 8 new lifters, gaskets, seals, and valve spring. Total cost $3304.79, the vehicle only has 69,801 miles on it. In addition one of the rear tail lights has a known issue (found out on google), intermittently goes out, was never notified. I took the car to Jim Hudson GMC to be told it would cost $475 plus tax because I did not come in early enough even though it is to be warranted up to 70,000 miles. I am greatly concerned that this engine has the same manufacturing defects of the current recall and extended recall for the GMC Yukon Denali engines.

At stop light vehicle began to sputter, run rough, and make noise. I was less than a mile from my home, no check engine light on. I turned the vehicle off, used a scanner to have codes P0106 and P0506 show. I had vehicle towed to Complete Car Care. Misfire on multiple cylinders, 3 push rods bent, one valve spring broken. The right Cylinder head assembly had to be removed and replaced with 8 new push rods, 8 new lifters, gaskets, seals, and valve spring. Total cost $3304.79, the vehicle only has 69,801 miles on it. In addition one of the rear tail lights has a known issue (found out on google), intermittently goes out, was never notified. I took the car to Jim Hudson GMC to be told it would cost $475 plus tax because I did not come in early enough even though it is to be warranted up to 70,000 miles. I am greatly concerned that this engine has the same manufacturing defects of the current recall and extended recall for the GMC Yukon Denali engines.

At stop light vehicle began to sputter and make noise, I was very close to my home, no engine light on. Upon turning vehicle off and using a code reader codes P0106 and P0506 was on scanner. I had vehicle towed to Complete Car Care. Mis fire on multiple cylinders. Vehicle has 69,801 miles. 3 push rods bent and I valve spring broken. The right Cylinder head assembly had to be removed and replaced with 8 new push rods, 8 new lifters, gaskets, seals, and valve spring. Cost was $3304.79. In addition the rear tail light has been sporadic on and off, GM was to replace up to 70,000 miles. When I took it to them they stated the time limit had expired, yet I had not been informed until I did a google search. GM requesting $475 plus tax. I am concerned my vehicle has the same manufacturing defects as the GM motors being recalled with total engine failures.

At stop light vehicle began to sputter and make noise, I was very close to my home, no engine light on. Upon turning vehicle off and using a code reader codes P0106 and P0506 was on scanner. I had vehicle towed to Complete Car Care. Mis fire on multiple cylinders. Vehicle has 69,801 miles. 3 push rods bent and I valve spring broken. The right Cylinder head assembly had to be removed and replaced with 8 new push rods, 8 new lifters, gaskets, seals, and valve spring. Cost was $3304.79. In addition the rear tail light has been sporadic on and off, GM was to replace up to 70,000 miles. When I took it to them they stated the time limit had expired, yet I had not been informed until I did a google search. GM requesting $475 plus tax. I am concerned my vehicle has the same manufacturing defects as the GM motors being recalled with total engine failures.

At stop light vehicle began to sputter, run rough, and make noise. I was less than a mile from my home, no check engine light on. I turned the vehicle off, used a scanner to have codes P0106 and P0506 show. I had vehicle towed to Complete Car Care. Misfire on multiple cylinders, 3 push rods bent, one valve spring broken. The right Cylinder head assembly had to be removed and replaced with 8 new push rods, 8 new lifters, gaskets, seals, and valve spring. Total cost $3304.79, the vehicle only has 69,801 miles on it. In addition one of the rear tail lights has a known issue (found out on google), intermittently goes out, was never notified. I took the car to Jim Hudson GMC to be told it would cost $475 plus tax because I did not come in early enough even though it is to be warranted up to 70,000 miles. I am greatly concerned that this engine has the same manufacturing defects of the current recall and extended recall for the GMC Yukon Denali engines.

At stop light vehicle began to sputter and make noise, I was very close to my home, no engine light on. Upon turning vehicle off and using a code reader codes P0106 and P0506 was on scanner. I had vehicle towed to Complete Car Care. Mis fire on multiple cylinders. Vehicle has 69,801 miles. 3 push rods bent and I valve spring broken. The right Cylinder head assembly had to be removed and replaced with 8 new push rods, 8 new lifters, gaskets, seals, and valve spring. Cost was $3304.79. In addition the rear tail light has been sporadic on and off, GM was to replace up to 70,000 miles. When I took it to them they stated the time limit had expired, yet I had not been informed until I did a google search. GM requesting $475 plus tax. I am concerned my vehicle has the same manufacturing defects as the GM motors being recalled with total engine failures.

Service Trailer Braking System alert intermittent & ongoing for months. Electrical fault? Possible fuse problem? Stranded with kids because car wouldn’t start. Later conducted diagnostics on battery and starter, both normal.

Engine failure 6.2L cylinder failure. Recall already in effect for other years. But it seems that it is needed to be expanded. I had to do a complete engine replacement and all oil related components. Metal was found easily in the oil and oil filter. I was luckily in a parking ramp when it happened so I did not crash. I was already driving for 45 minutes prior on the interstate. Could have been very dangerous at high rate of speed.

Engine check light on, Code P0302 cylinder 2 misfire. loud mortar ticking, car makes abrupt jump/move forward.

Odometer Fraud. The contact purchased a 2017 GMC Yukon XL. The contact stated that upon taking the vehicle to an independent mechanic for repair, it was discovered that there was a mileage discrepancy. The vehicle was a dealer sale. At the time of purchase, the vehicle mileage was 203,000 and at the time of the vehicle servicing, it was discovered that the mileage was 335,142 in the diagnostic report.

I was stopped at a traffic light and was informed by another driver that my right tail lamp was not working. There were no warning lights indicating that there was a problem. When I arrived home, it began working after I tapped on it. A few days later, the left tail lamp stopped working. I began to realize that both tail lamps were only working intermittently. Upon inspection by the mechanic, I was informed that this is a common problem with my vehicle and that each replacement part is approximately $900, totaling nearly $2,000 to replace both lamps. This is an obvious safety hazard for myself and for others who may not be able to judge when I am stopping, especially if I have to stop suddenly.

My transmission failed again after being replaced by General Motors certified dealership. The transmission in question has failed again after less than five months being back in service. In 2024 and 2025 my vehicle has been in and out of the service department at other dealerships and they cannot repair the vehicle according to the dealerships they do not have the staff for it. General motors will not stand behind the transmission as they have now labeled it as a part so they will not have to provide transportation. According to dealerships in my area in Michigan, they do not have the staff or the parts to service my vehicle. I contacted General motors customer service multiple times regarding the situation. We truly have a bad transmission again in my vehicle. The transmission in question is a C8 transmission that has failed due to shuttering and downshifting, which the replacement remanufactured transmission for $8000 continues to fail. General motors will not buy back this vehicle or address this ongoing issue. I truly believe I am not the only person with transmission issues as this is a major defect by the manufacturer, which is General Motors. Will you please look into my complaint is this is caused severe hardship to my family. General Motors needs to take responsibility for this failure to the transmission. I’ve had seven other items that have failed also on this vehicle, including the engine. Thank you for your time and consideration looking into this matter. Sincerely [XXX] . INFORMATION REDACTED PURSUANT TO THE FREEDOM OF INFORMATION ACT (FOIA), 5 U.S.C. 552(B)(6)

In May 2025, my vehicle suddenly started jerking, shaking, and almost stalled out while driving. I was on a busy 3 lane roadway with 6 passengers total. As I would try to accelerate, the power was significantly decreased. I felt it jerk between shifting several times. My check engine light came on. I was so scared that someone would hit my vehicle and injure us. I brought it to a GMC dealership. They said that my transmission failed, metal in the transmission fluid. How is this possible? Upon researching this problem, this is a common issue with the 2017 GMC Yukon Denali. There are class action law suits and lemon law lawsuits against GMC regarding this problem which causes major safety concerns. My vehicle has been well maintained with lots of service records to prove it. I have babied her and I’ve never towed anything. This transmission issue needs to be addressed and recalled. I need a new transmission which will cost between $5,000-$7,000. This is just horrible and disappointing regarding the quality and reported issues that are not being recalled by GMC.

Transmission shudder, shifting hard, other Transmission issues

Lifter stuck 6000.00 dollars worth of damage on 2017 Yukon . All lifters and cam shaft need to be replaced . Vehicle is at foley automotive so I don’t have a receipt yet [XXX] INFORMATION REDACTED PURSUANT TO THE FREEDOM OF INFORMATION ACT (FOIA), 5 U.S.C. 552(B)(6)

I am filing a complaint regarding a serious safety issue with my 2017 GMC Yukon XL related to the brake vacuum pump. According to recall information (NHTSA Recall ID: N192268490), certain 2015-2017 GMC Yukon and Yukon XL vehicles are equipped with a defective vacuum pump that may decrease in output over time. This defect reduces power brake assist, resulting in increased braking effort, a hard brake pedal, and extended stopping distances. These conditions significantly increase the risk of a crash. I have experienced symptoms consistent with this issue, including vibrating brake pedal with no slippage, a hard pedal, ticking noises from the engine, a 'Service Brake Assist' warning message, and difficulty braking. This issues usually occur under 10 mph. These problems compromise the vehicle’s braking performance and pose a direct threat to the safety of myself, my passengers, and other road users.

I report years ago the seat belts wasn’t work, also all time I report with GMC vibrations and stops power at roads or low power to go in the freeways some times are to , and screen for gos and radio wasn’t work, this was a bad car . I take some videos but the agency try to charge me to check the car. Al of those put my person or others person in a risk because I lost the power in the middle of the road also, 2 of the seats belts are not working 1 of those is for my child, and the screen for gps can make me crazy at roads the system report construction or objects at road and I decrease the velocity in roads and the car was behind me slow or the screen jump from gps to radio or news or whatever some times the touch doesn’t work and I was lost in the roads driving around. The last thing is the vibration went I use the brakes to stop the car is shaking this was my first new car and is bad car and unsafe car

I report years ago the seat belts wasn’t work, also all time I report with GMC vibrations and stops power at roads or low power to go in the freeways some times are to , and screen for gos and radio wasn’t work, this was a bad car . I take some videos but the agency try to charge me to check the car. Al of those put my person or others person in a risk because I lost the power in the middle of the road also, 2 of the seats belts are not working 1 of those is for my child, and the screen for gps can make me crazy at roads the system report construction or objects at road and I decrease the velocity in roads and the car was behind me slow or the screen jump from gps to radio or news or whatever some times the touch doesn’t work and I was lost in the roads driving around. The last thing is the vibration went I use the brakes to stop the car is shaking this was my first new car and is bad car and unsafe car

I report years ago the seat belts wasn’t work, also all time I report with GMC vibrations and stops power at roads or low power to go in the freeways some times are to , and screen for gos and radio wasn’t work, this was a bad car . I take some videos but the agency try to charge me to check the car. Al of those put my person or others person in a risk because I lost the power in the middle of the road also, 2 of the seats belts are not working 1 of those is for my child, and the screen for gps can make me crazy at roads the system report construction or objects at road and I decrease the velocity in roads and the car was behind me slow or the screen jump from gps to radio or news or whatever some times the touch doesn’t work and I was lost in the roads driving around. The last thing is the vibration went I use the brakes to stop the car is shaking this was my first new car and is bad car and unsafe car

The engine developed a ticking noise which turned out to be bad lifters and bent lifter rods, and a bad valve lifter oil manifold.

While driving it will jerk into gear shifting is rough.

Transmission shudder lunching hard up and down shift

Transmission Failed at 100,000 miles stalling vehicle brakes pushing back on me.

Transmission Failed at 100,000 miles stalling vehicle brakes pushing back on me.

The contact owns a 2017 GMC Yukon XL. The contact stated while parked and attempting to start the vehicle, the contact heard an abnormal knocking sound coming from the vehicle. The contact attempted to depress the accelerator pedal however, the vehicle failed to respond as needed. The contact stated that a dealer and an independent mechanic were contacted. The vehicle was towed to an independent mechanic where it was diagnosed and determined that the camshaft was not aligned. The contact was informed that the independent mechanic would be able to align the camshaft; however, if the failure persisted there would be a cost for the repair. The vehicle was not repaired. The manufacturer was not notified of the failure. The contact related the failure to N232430470 - Special Coverage (Camshaft Position Actuator Valve Solenoid - Bank 2 (Left Side) Exhaust); however, the VIN was not included in the special coverage program. The approximate failure mileage was 131,000.

I purchased a 2017 yukon xl denali. In the short time that I have had the vehicle the transmission has started to make a loud audible popping noise when coming to a complete stop. I have take the vehicle to the GM dealership multiple times to try and get the problem fixed and according to them it is something with the transmission that they don't know exactly how to fix. So I am stuck with this 8l90 transmission that is a piece of junk and can't even get a rebuilt transmission from companies like Jasper due to the issues of these transmissions.

The contact owns a 2017 GMC Yukon XL. The contact stated that while stopped on several occasions, the accelerator pedal was depressed; and there was a loud clunking noise coming from the engine compartment and the vehicle violently jerked each time. There were no warning lights illuminated. The vehicle was taken to a dealer seven times however, the failure was not replicated. The manufacturer was not notified of the failure. The failure mileage was approximately 20,000.

Noting that prior to this we only had one issue with transmission and we did the flush and it did fine for several thousand of miles. Fast forward to a few days ago. As I was driving down the highway I came to a stop at the red light. Once it was green and I pressed on the accelerator with my foot per usual. And it did not move it pushed the gas peddle and nothing at all happened. I was stuck in the highway could not move until I’m assuming the transmission finally shifted jarring my entire car and it allowed me to get to a safe place at 20 miles an hour max. Keep in mind I was in the middle of the highway not knowing what was happening. With my precious babies in the car. Thanking God we were not injured. This problem is so common and notorious among GMC Yukons 2017 year models. It’s saddening that now I have a car note on a car that will not go. Transmissions are back ordered who knows when I can have my car back this economy is horrible trying to stay afloat. And now we have a vehicle that won’t drive and no time forks of when it can drive. This needs to be addressed asap. Other people are dealing with the same things and GMC need to make this safety concern a thing of the past. Make a recall.

Noting that prior to this we only had one issue with transmission and we did the flush and it did fine for several thousand of miles. Fast forward to a few days ago. As I was driving down the highway I came to a stop at the red light. Once it was green and I pressed on the accelerator with my foot per usual. And it did not move it pushed the gas peddle and nothing at all happened. I was stuck in the highway could not move until I’m assuming the transmission finally shifted jarring my entire car and it allowed me to get to a safe place at 20 miles an hour max. Keep in mind I was in the middle of the highway not knowing what was happening. With my precious babies in the car. Thanking God we were not injured. This problem is so common and notorious among GMC Yukons 2017 year models. It’s saddening that now I have a car note on a car that will not go. Transmissions are back ordered who knows when I can have my car back this economy is horrible trying to stay afloat. And now we have a vehicle that won’t drive and no time forks of when it can drive. This needs to be addressed asap. Other people are dealing with the same things and GMC need to make this safety concern a thing of the past. Make a recall.

Noting that prior to this we only had one issue with transmission and we did the flush and it did fine for several thousand of miles. Fast forward to a few days ago. As I was driving down the highway I came to a stop at the red light. Once it was green and I pressed on the accelerator with my foot per usual. And it did not move it pushed the gas peddle and nothing at all happened. I was stuck in the highway could not move until I’m assuming the transmission finally shifted jarring my entire car and it allowed me to get to a safe place at 20 miles an hour max. Keep in mind I was in the middle of the highway not knowing what was happening. With my precious babies in the car. Thanking God we were not injured. This problem is so common and notorious among GMC Yukons 2017 year models. It’s saddening that now I have a car note on a car that will not go. Transmissions are back ordered who knows when I can have my car back this economy is horrible trying to stay afloat. And now we have a vehicle that won’t drive and no time forks of when it can drive. This needs to be addressed asap. Other people are dealing with the same things and GMC need to make this safety concern a thing of the past. Make a recall.

Had the torque converter replaced at around 58,000 miles because of shutter in transmission. At around under 100,000 miles I called the dealership back up because the shutter is back again and now my NEW torque converter is bad. They said they only had a 25,000 mile warrantee on the new converter and I was out of my replacement window for warrantee. Everything online says torque converters can last well over 150,000 miles and sometimes even the entire life of a vehicle. I have now had two replaced. By searching online for info about this it is CLEARLY a known problem with these vehicles and gmc isn’t doing anything about it.

I want to relate an incident that thankfully did not result in a serious mishap or injury. It Occurred on Canada’s most busy highway. On Saturday [XXX] We were just coming off [XXX] and traffic started to backup. It was heavy. It is then that I lost all control of the Vehicle’s speed. The transmission gave way and left us unable to accelerate as the traffic began to speed up dramatically. I quickly hit the flashers and coasted to the shoulder avoiding the speeding traffic. I managed to get a bit of forward movement to stay out of the way. The transmission would not work at higher speeds. It was nerve racking and we felt unsafe in our predicament. To avoid towing charges, we slowly and carefully took an exit to get on a less travelled road and shut off the vehicle to let it cool. After restarting it we were able to slowly limp to a GM dealership on Fairview in Burlington Ontario Canada. They could not help us as their Transmission mechanic was off for two weeks. My daughter eventually came and picked us up. I left the vehicle at the GM dealer to pick up later after attending our function in Toronto. Later in the evening we returned and were able to return to our Canadian residence in Niagara Falls Ontario Canada by driving well under the speed limit on the [XXX] highway. We then took the vehicle, again at low speed we took the vehicle to Falls Chevrolet, Cadillac, Buick, GMC where their transmission mechanic was out for training. We left the vehicle with them for a week. They advised me that the transmission was basically unrepairable and too costly to rebuild, so we went with a complete replacement. They were very helpful. It was expensive. This happened at 119,000 miles. The Yukon gave no indication of a failure till it happened. We have driven long distances with this vehicle. I understand this is not uncommon with this make and model. INFORMATION REDACTED PURSUANT TO THE FREEDOM OF INFORMATION ACT (FOIA), 5 U.S.C. 552(B)(6)

drivers side tail light flickering and sometimes not working a $900+ cost! I issue with right hand side when suv has 32k miles, seems like this is an ongoing issue, luckily it was still under warranty the 1st time. The AC condenser when out in April, also an know issue with the Yukon, they wanted to charge me $1500 to repair, I was able to find someone to do it for around $600, now the outlet and usb ports seem to not work. I also had an issue with the braking system , dealer couldn't figure it out, I finally found someone to repair it, $500 fix. For what I paid for the Yukon, you would think they would use top of the line parts!

drivers side tail light flickering and sometimes not working a $900+ cost! I issue with right hand side when suv has 32k miles, seems like this is an ongoing issue, luckily it was still under warranty the 1st time. The AC condenser when out in April, also an know issue with the Yukon, they wanted to charge me $1500 to repair, I was able to find someone to do it for around $600, now the outlet and usb ports seem to not work. I also had an issue with the braking system , dealer couldn't figure it out, I finally found someone to repair it, $500 fix. For what I paid for the Yukon, you would think they would use top of the line parts!

drivers side tail light flickering and sometimes not working a $900+ cost! I issue with right hand side when suv has 32k miles, seems like this is an ongoing issue, luckily it was still under warranty the 1st time. The AC condenser when out in April, also an know issue with the Yukon, they wanted to charge me $1500 to repair, I was able to find someone to do it for around $600, now the outlet and usb ports seem to not work. I also had an issue with the braking system , dealer couldn't figure it out, I finally found someone to repair it, $500 fix. For what I paid for the Yukon, you would think they would use top of the line parts!

In july 2021 the passenger side tail light stopped working. A certified GMC dealer replaced both tail lights. In Feb 2024 the driver side tail light failed.

There was a pump in the heart of the transmission. The dealer said told me that was leaking fluid. Apparently this was a faulty hose within the transmission which leaked fluid in the transmission. Therefore, my transmission died. This was a severe I could have been a very dangerous situation if my kids had been in the car. I’ve had to pay almost $8000 for the transmission to be fixed and yeah I see that on the line there was some sort of recall but my dealership is saying there was not. I bought this car brand new and I’ve had it for seven years. I’ve never had an issue with the transmission on any of my vehicles ever.

There was a pump in the heart of the transmission. The dealer said told me that was leaking fluid. Apparently this was a faulty hose within the transmission which leaked fluid in the transmission. Therefore, my transmission died. This was a severe I could have been a very dangerous situation if my kids had been in the car. I’ve had to pay almost $8000 for the transmission to be fixed and yeah I see that on the line there was some sort of recall but my dealership is saying there was not. I bought this car brand new and I’ve had it for seven years. I’ve never had an issue with the transmission on any of my vehicles ever.

Car has 100k miles on it. At 59k the fuel injectors went out and needed to be replaced. Then the transmission went out and needed to be replaced, then the front differential needed to be rebuilt, also had to replace the struts. Now the lifters are going out and that, plus likely the camshaft, need to be fixed. Total costs for all the above is close to $20,000. If not fixed these problems could easily result in catastrophic engine failure while driving leading to personal injury and death. I see that there is a class action lawsuit for the latter.

Car has 100k miles on it. At 59k the fuel injectors went out and needed to be replaced. Then the transmission went out and needed to be replaced, then the front differential needed to be rebuilt, also had to replace the struts. Now the lifters are going out and that, plus likely the camshaft, need to be fixed. Total costs for all the above is close to $20,000. If not fixed these problems could easily result in catastrophic engine failure while driving leading to personal injury and death. I see that there is a class action lawsuit for the latter.

Truck RPMs were running really high between shifting with normal acceleration. I took the truck to a transmission shop as I purchased an extended warranty. The transmission needed to be rebuilt as many parts were worn. The extended warranty repair was made. After repairs, the truck has started doing the same thing 4 weeks later. It appears the transmission is not properly shifting again, I am not sure if it's a transmission issue as all parts have been replaced, or a computer issue that's causing the malfunction. The vehicle is available for inspection. My safety is put as risk because if the transmission does not shift properly, it is at risk at breaking while in motion which could potentially cause an accident and if the transmission breaks will on the highway, i dont know what type of risk that can entail. The transmission shop has indicated that they are noticing the same issue as before and do not see any reason for the issue to be continuing. There were no warning lamps or indicators that have shown up to indicate an issue. This is noticed by daily driving of the vehicle and noticing normal and not normal RPMs, shifting points and feeling.

The rear lift gate on the Yukon xl has the automatic sensor underneath the trailer hitch that you can swing your foot under to open or close. Twice, while loading groceries, I have had it close on my head, and this time with concussion symptoms. This also happened to my elderly mother.

The 'active fuel management/displacement on demand' lifters failed and caused the engine to run very poorly with a significant lack of power. This occurred while driving and could have caused a crash before I was able to get off the road and out of the way of traffic. The problem was diagnosed and confirmed by an independent repair shop. The vehicle had to have the camshaft and all valve lifters replaced, as well as several valves that were damaged in the failure. The total cost to repair was just over $9000. The failure also caused the catalytic converters to become clogged, resulting in even further loss of power from the engine. There were no warning lamps or symptoms prior to the failure. It occurred suddenly as I was driving down the road. Searching online reveals this seems to be a common problem with GM 5.3 and 6.2l engines from 2010 onward. GM is aware of the issues and refuses to assist in any way. Their only response is that the vehicle is "Out of warranty". The failure is caused by a design defect in the AFM/DOD system that starves the lifters of oil, resulting in lifter failure and damage to the camshaft and valves.

Weld on AC condenser is leaking and now I have no AC