Technical Service Bulletins
Search 172,063 manufacturer communications covering 879 vehicle makes from 1955 to 2025.
Showing 891 bulletins for PREVOST
IS-17071A
Mar 15, 2019
110000 ELECTRICAL SYSTEM
This instruction sheet explains how to install an ELD interface on OBD vehicles
IS-18910
Mar 14, 2019
080000 FUEL SYSTEM, DIESEL
This instruction sheet explains how to install a flap over the diesel filling cap
IS-11003G
Mar 8, 2019
110000 ELECTRICAL SYSTEM
This Instruction sheet explains how to replace the ?MASTER ID? WITH ?MCM? Module
SCI18-47
Mar 6, 2019
160000 STRUCTURE
This instruction sheet explains how to adjust the slide out room laterally in the frame opening, front and rear from a vehicle standpoint.
SCI19-01A
Feb 27, 2019
110000 ELECTRICAL SYSTEM
This procedure explains how to program a MCM especially for the control of the electric fan drive, as required for conversion kit of instruction sheets IS-19900 & IS-19910.
SP18-39B
Feb 21, 2019
060000 ENGINE (PWS)
This Special Bulletin explains how to perform the replacement of the SCR tank, when authorized.
SP19-09B
Feb 8, 2019
110000 ELECTRICAL SYSTEM
On the vehicles affected by this bulletin, add a jumper on connector A175.
MI19-05
Feb 7, 2019
350000 EQUIPMENT
This Maintenance Information expains how to adjust p/n 660865, 660699 draglinks
MI19-06
Feb 7, 2019
030000 BRAKES (PWS)
This Maintenance Information is published to answer some questions regarding the inverted or ?trailing? mounting position of the drive axle brake calipers on Prevost vehicles
IS-17102A
Feb 6, 2019
350000 EQUIPMENT
This Instruction sheet explains how to install ISM (Intelligent Sleep Mode) On X Series With Prime Hardware
SP18-49A
Feb 5, 2019
010000 STEERING
On the vehicles affected by this bulletin, an inspection of the upper steering column universal joint must be performed.
IS-19911B
Feb 4, 2019
350000 EQUIPMENT
This Instruction sheet explains how to install Ism (Intelligent Sleep Mode) - on H Series with PRIME hardware
IS-19905
Jan 31, 2019
112000 ELECTRICAL SYSTEM:ALTERNATOR/GENERATOR/REGULATOR
This instruction sheet explains how to install Delco Remy Alternators on H3 vehicles equipped with EFD
IS-19906
Jan 31, 2019
110000 ELECTRICAL SYSTEM
This instruction sheet explains how to perform alternator conversion, from Bosch to Delco Remy, on X3 vehicles equipped with EFD
IS-19908
Jan 31, 2019
110000 ELECTRICAL SYSTEM
This instruction sheet explains how to perform alternator conversion, from Bosch to Delco Remy, on H3 vehicles
IS-19909
Jan 31, 2019
110000 ELECTRICAL SYSTEM
This instruction sheet explains how to perform alternator conversion, from Bosch to Delco Remy, on X3 vehicles
IS-19900
Jan 30, 2019
060000 ENGINE AND ENGINE COOLING
This instruction sheet explains how to convert H3 SERIES US10 vehicles equipped with Bosch Alternators to electric fan drive (EFD) cooling system
IS-19910
Jan 30, 2019
353000 EQUIPMENT:ELECTRICAL
This instruction sheet explains how to convert H3 SERIES US10 vehicles (equipped with Delco Remy Alternators) to electric fan drive (EFD) cooling system
SP19-09
Jan 30, 2019
110000 ELECTRICAL SYSTEM
On the vehicles affected by this bulletin, add a jumper on connector A175.
IS-13009D
Jan 23, 2019
017210 STEERING:LINKAGES:DRAG:LINK:CONNECTION
This instruction sheet explains how to install and adjust drag link # 660699
SP18-13F
Jan 23, 2019
017210 STEERING:LINKAGES:DRAG:LINK:CONNECTION
On the vehicles affected by this bulletin, proceed to the replacement of the drag link.
IS-15075
Jan 22, 2019
160000 STRUCTURE
This instruction sheet explains how to replace fenders made of fiber glass with Aluminium
IS-18909
Jan 21, 2019
060000 ENGINE AND ENGINE COOLING
This instruction sheet explains how to replace the Carrier AC compressor with a Bitzer
SCI19-01
Jan 12, 2019
350000 EQUIPMENT
This procedure explains how to program a MCM especially for the control of the electric fan drive, as required for conversion kit of instruction sheets IS-19900 & IS-19910.
IS-11003F
Jan 7, 2019
110000 ELECTRICAL SYSTEM
This Instruction sheet explains how to replace the "MASTER ID WITH MCM" Module