Technical Service Bulletins
Search 172,063 manufacturer communications covering 879 vehicle makes from 1955 to 2025.
Showing 1,663 bulletins for INFINITI
ITB14028A
Aug 6, 2015
103200 POWER TRAIN:AUTOMATIC TRANSMISSION:FLUID/LUBRICANT
SERVICE INFORMATION The information in this bulletin is provided to help ensure correct diagnosis and repair of fluid leaks. All fluid leaks, when properly diagnosed, should be repaired (whether under warranty or customer pay) to ensure
P5137
Aug 6, 2015
090000 FUEL SYSTEM, OTHER
In 1996, Infiniti launched a Service Campaign to offer clients the opportunity to replace the fuel injectors and related hoses. Parts for this campaign are no longer available. This client satisfaction initiative and the campaign are no lo
ITB-14-051
Jul 29, 2015
180000 VEHICLE SPEED CONTROL
INFINITI: ON SOME VEHICLES, THE FORWARD COLLISION WARNING (FCW) MALFUNCTION HAS BEEN OR IS ON AND FLUID LEVEL FOR BRAKES IS NORMAL AND THE ABS CONTROL UNIT NEEDS PROGRAMMING, PER SERVICE PROCEDURE. MODEL 2013-14 JX35, QX60, 2014-15 Q50.
ITB14051A
Jul 29, 2015
100000 POWER TRAIN
IF YOU CONFIRM All of the following: The FCW (Forward Collision Warning) malfunction is ON or reported to have been ON, and DTC C1A27 (ECD POWER SUPPLY CIRCUIT) is stored (Past or Current), and the brake fluid level is normal. NOTE: C1A
ITB13054D
Jul 22, 2015
061600 ENGINE AND ENGINE COOLING:ENGINE:ENGINE CONTROL MODULE (ECU/ECM)
IF YOU CONFIRM: The MIL is ON with DTC P0101 and/or P010B (MAF SEN/CIRCUIT-B1/B2) and there are no drivability issues. ACTION: 1. Refer to step 6 in the SERVICE PROCEDURE to confirm this bulletin applies to the vehicle you are working
ITB15001A
Jul 8, 2015
010000 STEERING
IF YOU CONFIRM The steering wheel makes a faint squeaking/ticking noise when turned left or right. NOTE: Due to the faint nature of this noise it may be necessary to lift front wheels off of the ground so that it can be isolated. ACT
ITB10037D
Jul 7, 2015
010000 STEERING
SERVICE INFORMATION The Applied Vehicles are equipped with a new version of Intelligent Key presets memory. Each Intelligent Key can be programmed to have its own unique set of presets for certain vehicle systems. Vehicle systems that
ITB15-025
Jul 6, 2015
355200 EQUIPMENT:OTHER:OWNERS/SERVICE/OTHER MANUAL
INFINITI NISSAN NORTH AMERICA: BULLETIN INFORMATION INVOLVING SERVICING LOW PROFILE TIRES EQUIPPED WITH TPMS SENSORS AND RUN FLAT TIRES. *LJ
ITB15025
Jul 6, 2015
010000 STEERING
SERVICE INFORMATION When servicing run flat tires or low profile tires: - Special equipment and procedures are required to avoid damage. - Specifically, Tire Pressure Monitor transmitters (TPMS sensors) can be damaged when imprope
NTB15-060
Jul 6, 2015
355200 EQUIPMENT:OTHER:OWNERS/SERVICE/OTHER MANUAL
NISSAN: SERVICE BULLETIN INSTRUCTIONS FOR SERVICING LOW PROFILE AND RUN FLAT TIRES EQUIPPED WITH TPMS SENSORS. *LJ
ITB15024
Jun 24, 2015
063100 ENGINE AND ENGINE COOLING:EXHAUST SYSTEM:EMISSION CONTROL
SERVICE INFORMATION After ECM reprogramming, the Calibration Verification Number (CVN) needs to be automatically calculated prior to State emissions testing (also known as Inspection Maintainence, I/M, or SMOG testing depending upon loca
PC377
Jun 23, 2015
020000 SUSPENSION
Infiniti is conducting a retailer inventory inspection to inspect the right and left transverse link pivot bolt to ensure that the locking nut is present and torqued to the correct specification.
ITB12072C
Jun 22, 2015
020000 SUSPENSION
IF YOU CONFIRM There is a vibration or judder feeling from the rear of the vehicle when making turns on dry roads at low speeds (under 40 MPH), and it does not occur if the Electric Controlled Coupling is electrically disconnected. ACTI
ITB15022
Jun 12, 2015
280000 BACK OVER PREVENTION
IF YOU CONFIRM: The MIL is ON and any of the following DTCs are stored in the ECM: - P0037, P0038, P0057, P0058, P0139, P0159, P0141, P0161, P0137, P0157, P0138, P0158 ACTION: 1. Refer to step 6 in the SERVICE PRO
ITB15023
Jun 12, 2015
353000 EQUIPMENT:ELECTRICAL
SERVICE INFORMATION When replacing both of the vehicle?s I-Keys, due to being lost prior to vehicle delivery, new I-Keys can now be registered without the BCM (or ECM) being replaced. Do not replace the BCM (or ECM) before replacing I
ITB14010B
Jun 4, 2015
350000 EQUIPMENT
SERVICE INFORMATION All parts listed in this bulletin's table are currently on parts restriction. If any of these parts are needed for any reason, order the part(s) using the order form in this bulletin. See this bulletin for furthe
ITB15020
May 7, 2015
200000 WHEELS
SERVICE INFORMATION The appearance of painted alloy wheels can be damaged if acidic cleaners are used. DO NOT use Chrome Wheel Cleaner on Painted Wheels. Many chrome wheel cleaners have acidic ingredients. Make sure to follow all instruct
ITB15019
Apr 30, 2015
110000 ELECTRICAL SYSTEM
SERVICE INFORMATION The Body Control Module (BCM) for the Applied Vehicles in this bulletin is now shipped as a blank unit. As with previous BCM replacements, when a blank unit is installed, the configuration process must be performed. Se
ITB15016
Apr 20, 2015
270000 LANE DEPARTURE
SERVICE INFORMATION If you confirm there is a need to replace the combination meter front cover (lens) on an Applied Vehicle for any reason (scratch, blemish, etc.): - Do not replace the entire combination meter assemby. The front cov
ITB15015
Apr 8, 2015
160000 STRUCTURE
SERVICE INFORMATION When removing the Engine Cover, special care must be taken to prevent damaging it. NOTE: If the Engine Cover is not removed in the sequence shown, the Engine Cover could be damaged. Please see this bulletin for
ITB15014
Mar 17, 2015
350000 EQUIPMENT
IF YOU CONFIRM The vehicle has been operated in cold weather, below approximately -18?C (0?F), and AWD ERROR is displayed in the Vehicle Information Display, and DTC C1204 (AWD Solenoid) is stored. ACTION Replace the AWD Control Unit
ITB10062E
Mar 16, 2015
200000 WHEELS
SERVICE INFORMATION For vehicles delivered to the dealers with wheel protector covers - Do not remove the wheel protector covers during Pre-Delivery Inspection (PDI) - Wheel protector covers help prevent cosmetic rotor corrosion. See
PC358
Mar 13, 2015
100000 POWER TRAIN
Infiniti is informing affected clients that their vehicles (non-Hybrid models) are eligible for Continually Variable Transmission (CVT) Transmission Control Module (?TCM?) software programming update to improve CVT service diagnostics
ITB15013
Mar 12, 2015
103100 POWER TRAIN:AUTOMATIC TRANSMISSION:CONTROL MODULE (TCM/PCM/TECM)
INFORMATION If this bulletin applies by checking Service COMM (PC358), and the TCM?s current part number is listed in Table A of this bulletin, then reprogram the TCM. See this bulletin for further detail.
ITB99043G
Mar 11, 2015
350000 EQUIPMENT
SERVICE INFORMATION NOTE - Failure to follow the procedures in this bulletin may result in the denial of a warranty claim. In an effort to protect the paint finish, Paint Guard Film (PGF) is applied on many new Infiniti vehicles. Pai