Wagner Power Paint Roller

CPSC Recall #88-096 - November 15, 1988

Recall Summary

Recall Number88-096
Recall DateNovember 15, 1988
Remedy TypeLabel, New Instructions, Replace

Where It Was Sold

The Wagner power paint rollers in question were sold nationwide by a variety of retailers
including Sears
Roebuck and Co. under the Craftsman power roller label within the same date codes.

Product

Wagner Power Paint Roller

Description

WASHINGTON, DC - Wagner Spray Tech Corporation of Minneapolis, Minn., is voluntarily offering free replacement seals, labeling and instructions on certain power paint rollers to correct a potential lid ejection problem on units manufactured between May and November, 1984. Used by do-it-yourself homeowners, the power paint roller consists of a pressure canister connected by hose to the paint roller. The can of paint is placed inside the canister, the lid attached, and the paint is driven to the roller under pressure exerted by an electric powered compressor. According to the U.S. Consumer Product Safety Commission (CSPC), the lid may be ejected from the canister with enough force to cause injury. There have been 41 reported incidents of the ejected lids causing facial and eye injuries. Paint rollers involved in the repair program are dates coded E84 through L84 on the bottom of the unit, and were identified as model no. 0155001 on the packaging. Consumers should stop using power paint rollers within the above date codes, and call Wagner toll-free, 1-800-365-7650, or write Wagner Spray Tech Corporation, 1770 Fernbrook Lane, Minneapolis, MN 55447 for a free repair kit. The company will provide two replacement seal rings for the pressure canister, a warning label to be affixed to the lid, and new operating instructions. The Wagner power paint rollers in question were sold nationwide by a variety of retailers, including Sears, Roebuck and Co. under the Craftsman power roller label within the same date codes.

Hazard

According to the U.S. Consumer Product Safety Commission (CSPC), the lid may be ejected from the canister with enough force to cause injury.

Incidents & Injuries

There have been 41 reported incidents of the ejected lids causing facial and eye injuries.

Remedy Instructions

Consumers should stop using the affected paint rollers and call Wagner toll-free at 1-800-365-7650, or write Wagner Spray Tech Corporation, 1770 Fernbrook Lane, Minneapolis, MN 55447 for a free repair kit. The company will provide two replacement seal rings for the pressure canister, a warning label to be affixed to the lid, and new operating instructions.

What Should You Do?

Stop using this product immediately. Contact the manufacturer for a Label, New Instructions, Replace at no charge. If you experienced an injury, report it at SaferProducts.gov.

Frequently Asked Questions

Follow the consumer action instructions in the recall notice above. Most recalls require you to stop using the product and contact the manufacturer directly, either by calling the toll-free number listed in the official CPSC notice or by visiting the manufacturer's website. You generally do not need a receipt or original packaging to claim a remedy. The manufacturer is legally required to provide the remedy (Label, New Instructions, Replace) at no cost to you.

Yes. If you were injured by a defective consumer product, whether recalled or not, you may have grounds for a product liability claim against the manufacturer and potentially the retailer. A recall notice can serve as evidence that the manufacturer was aware of the defect. Injuries that may support a claim include burns, lacerations, fractures, electric shock, choking incidents, and chemical exposure. Most product liability attorneys work on a contingency fee basis, meaning you pay nothing unless you win. Consult an attorney promptly, as statutes of limitation vary by state.

In most cases, no. CPSC-coordinated recall remedies are designed to be accessible without proof of purchase. Manufacturers typically ask consumers to self-certify ownership and may ask for photos of the product or its serial number. Some manufacturers request that you mail in a portion of the product (such as a cut cord or removed component) as proof of disposal. Check the specific remedy instructions for this recall for exact requirements. If you registered your product at the time of purchase, the process is usually even simpler.

If the original manufacturer has gone out of business, the recall remedy may no longer be available through them. In this case, contact CPSC directly at 1-800-638-2772 or cpsc.gov for guidance. If the brand was acquired by another company, the acquiring company may have assumed recall obligations. In some cases where a remedy is unavailable, CPSC advises consumers to safely dispose of the product. If you were injured by the product of a defunct company, consult a product liability attorney, parent companies, distributors, and retailers may still bear liability in some circumstances.