Sunbeam Mixmaster stand mixers, models 01930 and 01940
CPSC Recall #90-142 - August 26, 1990
Recall Summary
| Recall Number | 90-142 |
| Recall Date | August 26, 1990 |
| Remedy Type | Replace |
| Units Affected | Approximately 1,400 |
| Manufacturer | Sunbeam Appliance Company of Milwaukee, WI |
Product
Sunbeam Mixmaster stand mixers, models 01930 and 01940
Description
WASHINGTON, DC -- Approximately 1,400 Sunbeam Mixmaster stand mixers produced in the first quarter of 1990 are being voluntarily recalled by the manufacturer, Sunbeam Appliance Company of Milwaukee, WI, because they may present a risk of severe electric shock. The recall which is being conducted in cooperation with the U.S. Consumer Product Safety Commission (CPSC) involves two newly-introduced models of stand mixers, the 01930 and the 01940. Both of these mixers have chrome-plated housings. These mixers were distributed nationwide from February through April of this year. No other models are included in this recall. Consumers who purchased a Sunbeam stand mixer this year can determine if they have an affected model by looking for the model number and the date code on the nameplate located between the beater openings on the underside of the mixer housing. The model numbers affected are 01940 [Service No. 1-94BZ] and 01930 [Service No. 1-93BY]. The only mixers affected are those with date codes of: JPD, JPE, FPB, FPC, MPA, MPB, and MPC. The words "Sunbeam Appliance Company," also appear on the nameplate. If you have one of these mixers you should stop using it immediately and contact Sunbeam. Motors and other electrical components, through shipping, use or handling, may shift and contact the inside of the chrome-plated mixer housing, which could create a risk of severe electric shock to the user. Even though no consumers have reported electric shocks from using these mixers, Sunbeam recognized the possible severity of any electric shock and reported this potential hazard to the CPSC. Sunbeam has a toll-free telephone number, 1-800-458-8407, to assist consumers in determining if they have a mixer that should be returned. The number is in operation from 9:00 a.m. to 5:30 p.m. Eastern Time. Consumers who have affected mixers will be sent a pre-addressed, pre-stamped box in which to return the motor/housing of their mixer. Sunbeam will provide a replacement unit free of charge.
Hazard
Motors and other electrical components, through shipping, use or handling, may shift and contact the inside of the chrome-plated mixer housing, which could create a risk of severe electric shock to the user.
Incidents & Injuries
No shocks have been reported.
Remedy Instructions
If you have one of these mixers you should stop using it immediately and contact Sunbeam. Consumers who have affected mixers will be sent a pre-addressed, pre-stamped box in which to return the motor/housing of their mixer. Sunbeam will provide a replacement unit free of charge.
What Should You Do?
Stop using this product immediately. Contact the manufacturer for a Replace at no charge. If you experienced an injury, report it at SaferProducts.gov.
Frequently Asked Questions
Follow the consumer action instructions in the recall notice above. Most recalls require you to stop using the product and contact the manufacturer directly, either by calling the toll-free number listed in the official CPSC notice or by visiting the manufacturer's website. You generally do not need a receipt or original packaging to claim a remedy. The manufacturer is legally required to provide the remedy (Replace) at no cost to you.
No, you should stop using the product entirely, not just unplug it. Electric shock and fire hazards in recalled electrical products often involve internal wiring defects, faulty components, or insulation failures that can cause harm even after the product has been off for a period of time. Do not attempt to repair the product yourself. Keep it unplugged and stored safely until you receive the manufacturer's remedy. If the product has already shown signs of overheating, sparking, or discoloration, handle it carefully and consider contacting your local fire department for guidance on safe disposal.
In most cases, no. CPSC-coordinated recall remedies are designed to be accessible without proof of purchase. Manufacturers typically ask consumers to self-certify ownership and may ask for photos of the product or its serial number. Some manufacturers request that you mail in a portion of the product (such as a cut cord or removed component) as proof of disposal. Check the specific remedy instructions for this recall for exact requirements. If you registered your product at the time of purchase, the process is usually even simpler.
If the original manufacturer has gone out of business, the recall remedy may no longer be available through them. In this case, contact CPSC directly at 1-800-638-2772 or cpsc.gov for guidance. If the brand was acquired by another company, the acquiring company may have assumed recall obligations. In some cases where a remedy is unavailable, CPSC advises consumers to safely dispose of the product. If you were injured by the product of a defunct company, consult a product liability attorney, parent companies, distributors, and retailers may still bear liability in some circumstances.