Ryobi Radial Arm Saws

CPSC Recall #06-212 — July 12, 2006

Recall Summary

Recall Number06-212
Recall DateJuly 12, 2006
Remedy TypeRefund
Units AffectedAbout 145,000
ManufacturerRyobi Motor Products Corp. formerly of Anderson, S.C. ("RMP"); Ryobi Electric Tool Manufacturing, Inc. formerly of Chandler, Ariz.; and Ryobi Limited, of Hiroshima, Japan.
Manufactured InUnited States and Japan

Where It Was Sold

Home and hardware stores nationwide from 1986 through 1997 for between $200 and $300
and higher in some instances.

Product

Ryobi Radial Arm Saws

Description

WASHINGTON, D.C. - In cooperation with the U.S. Consumer Product Safety Commission (CPSC), Ryobi Motor Products Corp. formerly of Anderson, S.C. ("RMP"); Ryobi Electric Tool Manufacturing, Inc. formerly of Chandler, Ariz.; and Ryobi Limited, of Hiroshima, Japan, are voluntarily recalling about 145,000 Ryobi Radial Arm Saws. Cracking of the plastic motor housing can cause the blade assembly to fall during operation, posing a risk of laceration to the operator or bystanders. The detachment may occur unexpectedly and without warning.Name of Product: Ryobi Radial Arm SawsUnits: About 145,000Manufacturer: Ryobi Motor Products Corp. formerly of Anderson, S.C. ("RMP"); Ryobi Electric Tool Manufacturing, Inc. formerly of Chandler, Ariz.; and Ryobi Limited, of Hiroshima, Japan.Hazard: Cracking of the plastic motor housing can cause the blade assembly to fall during operation, posing a risk of laceration to the operator or bystanders. The detachment may occur unexpectedly and without warning.Incidents/Injuries: RMP has received five reports of detached blade assemblies, including four reports of lacerated fingers to the saw operators.Description and Models: The recall involves all RA200 and RA202 radial arm saws. These are bench top models with 8 1/4-inch blades. Each unit has a data plate immediately behind the operator grip for the saw, which says, "RYOBI 8 1/4" Radial Arm Saw" and either "RA200" or "RA202."Sold at: Home and hardware stores nationwide from 1986 through 1997 for between $200 and $300, and higher in some instances.Manufactured In: The United States and JapanRemedy: Consumers should immediately stop using these radial arm saws and contact Ryobi customer service to arrange to return part of the saw for a payment of $75. No repair is available.Consumer Contact: For additional information, contact Ryobi Customer Service at (800) 525-2579 between 8 a.m. and 4 p.m. ET any day of the week, or visit the following Web site: www.ryobi.com.

Hazard

Cracking of the plastic motor housing can cause the blade assembly to fall during operation, posing a risk of laceration to the operator or bystanders. The detachment may occur unexpectedly and without warning.

Incidents & Injuries

RMP has received five reports of detached blade assemblies, including four reports of lacerated fingers to the saw operators.

Remedy Instructions

Consumers should immediately stop using these radial arm saws and contact Ryobi customer service to arrange to return part of the saw for a payment of $75. No repair is available.

What Should You Do?

Stop using this product immediately. Contact the manufacturer for a Refund at no charge. If you experienced an injury, report it at SaferProducts.gov.

Frequently Asked Questions

Follow the consumer action instructions in the recall notice above. Most recalls require you to stop using the product and contact the manufacturer directly — either by calling the toll-free number listed in the official CPSC notice or by visiting the manufacturer's website. You generally do not need a receipt or original packaging to claim a remedy. The manufacturer is legally required to provide the remedy (Refund) at no cost to you.

Furniture tip-overs are a leading cause of pediatric injuries in the U.S., particularly dressers, bookcases, and television stands. CPSC data shows that a child dies approximately every two weeks from a furniture or TV tip-over. Unstable high chairs, baby swings, and bouncers are also frequent recall subjects due to fall risks. ASTM International standards now require that certain furniture must meet tip-over resistance standards, and CPSC has been actively pursuing mandatory requirements for dressers and chests. If you have furniture that was not recalled but feels unstable, wall-anchoring kits are widely available at hardware stores.

In most cases, no. CPSC-coordinated recall remedies are designed to be accessible without proof of purchase. Manufacturers typically ask consumers to self-certify ownership and may ask for photos of the product or its serial number. Some manufacturers request that you mail in a portion of the product (such as a cut cord or removed component) as proof of disposal. Check the specific remedy instructions for this recall for exact requirements. If you registered your product at the time of purchase, the process is usually even simpler.

If the original manufacturer has gone out of business, the recall remedy may no longer be available through them. In this case, contact CPSC directly at 1-800-638-2772 or cpsc.gov for guidance. If the brand was acquired by another company, the acquiring company may have assumed recall obligations. In some cases where a remedy is unavailable, CPSC advises consumers to safely dispose of the product. If you were injured by the product of a defunct company, consult a product liability attorney — parent companies, distributors, and retailers may still bear liability in some circumstances.