Ryobi 7 1/4-inch Circular Saws
CPSC Recall #01-232 — September 12, 2001
Recall Summary
| Recall Number | 01-232 |
| Recall Date | September 12, 2001 |
| Remedy Type | Repair |
| Units Affected | About 125,000 |
Where It Was Sold
| Home centers (including Home Depot) |
| hardware stores |
| and catalogs nationwide sold the circular saws from October 1998 through July 2001 for between $60 and $140. |
Product
Ryobi 7 1/4-inch Circular Saws
Description
WASHINGTON, D.C.- In cooperation with the U.S. Consumer Product Safety Commission (CPSC), Ryobi Technologies Inc. (RTI), of Anderson, S.C., is recalling to repair about 125,000 circular saws. The lower blade guards on these saws can stick in the open position, posing a risk of serious injury to the operator and bystanders.Ryobi Technologies has not received any reports of incidents. This recall is being conducted to prevent the possibility of injuries.The 7 1/4-inch circular saws have a blue plastic body and a metal blade guard. The name "Ryobi" appears on the blade guard and the motor housing. The recalled saws have one of the following model numbers - CSB120, CSB130, CSB1308, CSB130K, or CSB130JS - which can be found on a white label on the motor housing. Some of the recalled saws were sold in kits that included a hard plastic, gray storage case (embossed with "Ryobi Circular Saw") with the saw and blade inside.Home centers (including Home Depot), hardware stores, and catalogs nationwide sold the circular saws from October 1998 through July 2001 for between $60 and $140.Consumers should stop using the saws immediately and contact Ryobi's Consumer Response Team for a free repair kit. Consumers should call Ryobi toll-free at (800) 867-9624 between 8 a.m. and 5 p.m. ET Monday through Friday.Consumers also can write to the company at: Ryobi Technologies Inc., P.O. Box 1207, Anderson, SC 29622, Attention: Consumer Response Team.Any circular saw with a green dot on the warning label (which is affixed to the power cord) or on the product's packaging, is not included in this recall.
Hazard
The lower blade guards on these saws can stick in the open position, posing a risk of serious injury to the operator and bystanders.
Incidents & Injuries
Ryobi Technologies has not received any reports of incidents.
Remedy Instructions
Consumers should stop using the saws immediately and contact Ryobi's Consumer Response Team for a free repair kit.
What Should You Do?
Stop using this product immediately. Contact the manufacturer for a Repair at no charge. If you experienced an injury, report it at SaferProducts.gov.
Frequently Asked Questions
Follow the consumer action instructions in the recall notice above. Most recalls require you to stop using the product and contact the manufacturer directly — either by calling the toll-free number listed in the official CPSC notice or by visiting the manufacturer's website. You generally do not need a receipt or original packaging to claim a remedy. The manufacturer is legally required to provide the remedy (Repair) at no cost to you.
Yes. If you were injured by a defective consumer product — whether recalled or not — you may have grounds for a product liability claim against the manufacturer and potentially the retailer. A recall notice can serve as evidence that the manufacturer was aware of the defect. Injuries that may support a claim include burns, lacerations, fractures, electric shock, choking incidents, and chemical exposure. Most product liability attorneys work on a contingency fee basis, meaning you pay nothing unless you win. Consult an attorney promptly, as statutes of limitation vary by state.
In most cases, no. CPSC-coordinated recall remedies are designed to be accessible without proof of purchase. Manufacturers typically ask consumers to self-certify ownership and may ask for photos of the product or its serial number. Some manufacturers request that you mail in a portion of the product (such as a cut cord or removed component) as proof of disposal. Check the specific remedy instructions for this recall for exact requirements. If you registered your product at the time of purchase, the process is usually even simpler.
If the original manufacturer has gone out of business, the recall remedy may no longer be available through them. In this case, contact CPSC directly at 1-800-638-2772 or cpsc.gov for guidance. If the brand was acquired by another company, the acquiring company may have assumed recall obligations. In some cases where a remedy is unavailable, CPSC advises consumers to safely dispose of the product. If you were injured by the product of a defunct company, consult a product liability attorney — parent companies, distributors, and retailers may still bear liability in some circumstances.