PowerStream Power Supply Units for Air Sensors
CPSC Recall #19-064 — February 14, 2019
Recall Summary
| Recall Number | 19-064 |
| Recall Date | February 14, 2019 |
| Remedy Type | Replace |
| Units Affected | About 4,200 sold in the United States (in addition, about 172 were sold in Canada) |
| Manufacturer | HK Anenerge Co., Ltd, of Guangdong Province, China |
| Importer | PowerStream Technology, of Orem, Utah |
| Manufactured In | China |
Where It Was Sold
| Online at www.purpleair.com and as free giveaways in communities from October 2017 to August 2018 for about $230 to $260. |
Product
PowerStream Power Supply Units for Air Sensors
Description
This recall involves power supply units sold with PurpleAir PA-II and PA-II- SD air quality sensors with model number RKPO-UL052000C. The model number is located on the bottom side of the power adapter. The power adapters are black with a white label. They measure 4 inches long (including the mounting tabs) by 1-7/8 inches wide by 1-3/8 inches high. The air quality sensors are used outdoors by consumers to monitor air quality.
Hazard
The power supplies can overheat, posing fire and burn hazards.
Incidents & Injuries
PurpleAir has received 27 reports of the recalled power supplies emitting sparks and/or smoke of which 18 are reports of property damage, including one report of a small apartment fire. No injuries have been reported.
Remedy Instructions
Consumers should immediately stop using the recalled power supplies and contact PurpleAir for instructions on how to obtain a replacement power supply.
What Should You Do?
Stop using this product immediately. Contact the manufacturer for a Replace at no charge. If you experienced an injury, report it at SaferProducts.gov.
Frequently Asked Questions
Follow the consumer action instructions in the recall notice above. Most recalls require you to stop using the product and contact the manufacturer directly — either by calling the toll-free number listed in the official CPSC notice or by visiting the manufacturer's website. You generally do not need a receipt or original packaging to claim a remedy. The manufacturer is legally required to provide the remedy (Replace) at no cost to you.
If the product caused a fire or burn injury, document the incident with photos and preserve the product if it is safe to do so. Report the incident to the CPSC at SaferProducts.gov and to your local fire department. Contact the manufacturer to inform them of the incident — they are required to track and report injuries to CPSC. You may also want to consult a personal injury attorney, as fire and burn injuries caused by defective products can be grounds for a product liability claim against the manufacturer.
In most cases, no. CPSC-coordinated recall remedies are designed to be accessible without proof of purchase. Manufacturers typically ask consumers to self-certify ownership and may ask for photos of the product or its serial number. Some manufacturers request that you mail in a portion of the product (such as a cut cord or removed component) as proof of disposal. Check the specific remedy instructions for this recall for exact requirements. If you registered your product at the time of purchase, the process is usually even simpler.
If the original manufacturer has gone out of business, the recall remedy may no longer be available through them. In this case, contact CPSC directly at 1-800-638-2772 or cpsc.gov for guidance. If the brand was acquired by another company, the acquiring company may have assumed recall obligations. In some cases where a remedy is unavailable, CPSC advises consumers to safely dispose of the product. If you were injured by the product of a defunct company, consult a product liability attorney — parent companies, distributors, and retailers may still bear liability in some circumstances.