Power adapters used with certain Cisco ADSL Routers
CPSC Recall #02-017 — October 15, 2001
Recall Summary
| Recall Number | 02-017 |
| Recall Date | October 15, 2001 |
| Remedy Type | — |
| Units Affected | About 95,000 |
Where It Was Sold
| Service providers and distributors worldwide sold routers with these power adapters |
| from April 2000 through September 2001. |
Product
Power adapters used with certain Cisco ADSL Routers
Description
WASHINGTON, D.C.- In cooperation with the U.S. Consumer Product Safety Commission (CPSC), Cisco Systems Inc., of San Jose, Calif., is voluntarily recalling about 95,000 power adapters for replacement. These power adapters are used with certain Cisco Asymmetric Digital Subscriber Line (ADSL) Routers. The adapters can overheat and melt a hole through the housing, posing a fire hazard. In addition, the exposed wires pose a shock hazard.Cisco has received one report of an adapter overheating. No injuries or property damage have been reported.This recall involves power adapters with the part number "34-0949- 02." The part number is located on the adapter label, below the Cisco Systems logo. The power adapter is a small, black AC unit, which establishes a connection between the router and an electrical outlet. The adapters are used with the ADSL Routers that provide secure, high-speed Internet access for small businesses, small offices, home offices and corporate teleworkers. The power adapters were shipped with the following ADSL routers:Cisco 827Cisco 827-4VCisco 826Cisco SOHO77Cisco SOHO77-50Cisco 827-EURService providers and distributors worldwide sold routers with these power adapters, from April 2000 through September 2001.Consumers should stop using the power adapters immediately and contact Cisco to receive a free replacement. For more information, call Cisco at (800) 553-2447, anytime or go to the firm's web site at www.cisco.com.
Hazard
The adapters can overheat and melt a hole through the housing, posing a fire hazard. In addition, the exposed wires pose a shock hazard.
Incidents & Injuries
Cisco has received one report of an adapter overheating. No injuries or property damage have been reported.
Remedy Instructions
Consumers should stop using the power adapters immediately and contact Cisco to receive a free replacement.
What Should You Do?
Stop using this product immediately. Contact the manufacturer for a remedy at no charge. If you experienced an injury, report it at SaferProducts.gov.
Frequently Asked Questions
Follow the consumer action instructions in the recall notice above. Most recalls require you to stop using the product and contact the manufacturer directly — either by calling the toll-free number listed in the official CPSC notice or by visiting the manufacturer's website. You generally do not need a receipt or original packaging to claim a remedy. The manufacturer is legally required to provide the remedy (refund, replacement, or repair) at no cost to you.
If the product caused a fire or burn injury, document the incident with photos and preserve the product if it is safe to do so. Report the incident to the CPSC at SaferProducts.gov and to your local fire department. Contact the manufacturer to inform them of the incident — they are required to track and report injuries to CPSC. You may also want to consult a personal injury attorney, as fire and burn injuries caused by defective products can be grounds for a product liability claim against the manufacturer.
In most cases, no. CPSC-coordinated recall remedies are designed to be accessible without proof of purchase. Manufacturers typically ask consumers to self-certify ownership and may ask for photos of the product or its serial number. Some manufacturers request that you mail in a portion of the product (such as a cut cord or removed component) as proof of disposal. Check the specific remedy instructions for this recall for exact requirements. If you registered your product at the time of purchase, the process is usually even simpler.
If the original manufacturer has gone out of business, the recall remedy may no longer be available through them. In this case, contact CPSC directly at 1-800-638-2772 or cpsc.gov for guidance. If the brand was acquired by another company, the acquiring company may have assumed recall obligations. In some cases where a remedy is unavailable, CPSC advises consumers to safely dispose of the product. If you were injured by the product of a defunct company, consult a product liability attorney — parent companies, distributors, and retailers may still bear liability in some circumstances.