Power Adapters for heated pet beds
CPSC Recall #10-283 — June 28, 2010
Recall Summary
| Recall Number | 10-283 |
| Recall Date | June 28, 2010 |
| Remedy Type | Replace |
| Units Affected | About 20,000 |
| Importer | Radio Systems Corporation of, Knoxville, Tenn. |
| Manufactured In | China |
Where It Was Sold
| Pet specialty stores |
| catalog and online retailers nationwide from September 2006 through April 2010 for between $70 and $110. |
Product
Power Adapters for heated pet beds
Description
This recall involves the Class 2 Transformers that were sold with PetSafe Heated Wellness Sleepers. The power adapters are identified by the markings "PLUG IN CLASS 2 TRANSFORMER," "MODEL NO: K12-800" and have a spring coil covering the length of the electrical wire that goes from the sleeper. Power adapters without spring coils are not affected by this recall.
Hazard
When the metal connector is removed from the bed, it can cause arcing between the coil spring and the connector, posing a fire and burn hazard to consumers.
Incidents & Injuries
The firm has received three reports of connectors melting. No injuries or fires have been reported.
Remedy Instructions
Consumers should immediately stop using the recalled power adapter and contact the firm to receive a free replacement adapter.
What Should You Do?
Stop using this product immediately. Contact the manufacturer for a Replace at no charge. If you experienced an injury, report it at SaferProducts.gov.
Frequently Asked Questions
Follow the consumer action instructions in the recall notice above. Most recalls require you to stop using the product and contact the manufacturer directly — either by calling the toll-free number listed in the official CPSC notice or by visiting the manufacturer's website. You generally do not need a receipt or original packaging to claim a remedy. The manufacturer is legally required to provide the remedy (Replace) at no cost to you.
If the product caused a fire or burn injury, document the incident with photos and preserve the product if it is safe to do so. Report the incident to the CPSC at SaferProducts.gov and to your local fire department. Contact the manufacturer to inform them of the incident — they are required to track and report injuries to CPSC. You may also want to consult a personal injury attorney, as fire and burn injuries caused by defective products can be grounds for a product liability claim against the manufacturer.
In most cases, no. CPSC-coordinated recall remedies are designed to be accessible without proof of purchase. Manufacturers typically ask consumers to self-certify ownership and may ask for photos of the product or its serial number. Some manufacturers request that you mail in a portion of the product (such as a cut cord or removed component) as proof of disposal. Check the specific remedy instructions for this recall for exact requirements. If you registered your product at the time of purchase, the process is usually even simpler.
If the original manufacturer has gone out of business, the recall remedy may no longer be available through them. In this case, contact CPSC directly at 1-800-638-2772 or cpsc.gov for guidance. If the brand was acquired by another company, the acquiring company may have assumed recall obligations. In some cases where a remedy is unavailable, CPSC advises consumers to safely dispose of the product. If you were injured by the product of a defunct company, consult a product liability attorney — parent companies, distributors, and retailers may still bear liability in some circumstances.