Porter-Cable tools: Tiger Saw, Profile Sander, Cutout Tool, Circular Saw, Plate Joiner, and Jig Saw
CPSC Recall #96-012 - November 5, 1995
Recall Summary
| Recall Number | 96-012 |
| Recall Date | November 5, 1995 |
| Remedy Type | Replace, Repair |
| Units Affected | Approximately 1,500 |
Where It Was Sold
| The Porter-Cable tools listed above were sold nationwide during September 1995 |
| through mail order catalogs |
| home centers |
| hardware stores |
| and industrial and construction supply houses. |
Product
Porter-Cable tools: Tiger Saw, Profile Sander, Cutout Tool, Circular Saw, Plate Joiner, and Jig Saw
Description
WASHINGTON, D.C. - In cooperation with the U.S. Consumer Product Safety Commission (CPSC), Porter-Cable Corporation of Jackson, Tenn. is announcing a recall to inspect and replace approximately 1,500 power tools. The electrical cord may not have been properly crimped inside the plug, and as a result, users could be shocked by exposed wires on the cord set plug. The Porter-Cable tools identified with the potential problem are as follows: MODEL # DESCRIPTION SERIAL NO. RANGE #9737 Tiger Saw 24049 to 27983 #9444/444 Profile Sander 37515 to 40151 #7499 Cutout Tool 20503 to 20754 #345 Circular Saw 172580 to 173973 #556 Plate Joiner 227431 to 227768 and 227819 to 228381 #7549 Jig Saw 127677 to 127750, 128263 to 128774, and 129310 to 129392 The Porter-Cable tools listed above were sold nationwide during September 1995, through mail order catalogs, home centers, hardware stores, and industrial and construction supply houses. No other Porter-Cable products are involved in this program. Consumers who own one of the Porter-Cable tools with the serial numbers listed above should stop using the tool immediately and call Porter-Cable at (800) 487-8665. A Porter-Cable representative will help consumers determine if their tool is part of this program, and if necessary, will arrange for a free repair or replacement. Porter-Cable has received no reports of personal injury or property damage. The company is initiating this program to prevent the possibility of injury.
Hazard
The electrical cord may not have been properly crimped inside the plug, and as a result, users could be shocked by exposed wires on the cord set plug.
Incidents & Injuries
Porter-Cable has received no reports of personal injury or property damage.
Remedy Instructions
Consumers who own one of the Porter-Cable tools with the serial numbers listed above should stop using the tool immediately and call Porter-Cable at (800) 487-8665. A Porter-Cable representative will help consumers determine if their tool is part of this program, and if necessary, will arrange for a free repair or replacement.
What Should You Do?
Stop using this product immediately. Contact the manufacturer for a Replace, Repair at no charge. If you experienced an injury, report it at SaferProducts.gov.
Frequently Asked Questions
Follow the consumer action instructions in the recall notice above. Most recalls require you to stop using the product and contact the manufacturer directly, either by calling the toll-free number listed in the official CPSC notice or by visiting the manufacturer's website. You generally do not need a receipt or original packaging to claim a remedy. The manufacturer is legally required to provide the remedy (Replace, Repair) at no cost to you.
No, you should stop using the product entirely, not just unplug it. Electric shock and fire hazards in recalled electrical products often involve internal wiring defects, faulty components, or insulation failures that can cause harm even after the product has been off for a period of time. Do not attempt to repair the product yourself. Keep it unplugged and stored safely until you receive the manufacturer's remedy. If the product has already shown signs of overheating, sparking, or discoloration, handle it carefully and consider contacting your local fire department for guidance on safe disposal.
In most cases, no. CPSC-coordinated recall remedies are designed to be accessible without proof of purchase. Manufacturers typically ask consumers to self-certify ownership and may ask for photos of the product or its serial number. Some manufacturers request that you mail in a portion of the product (such as a cut cord or removed component) as proof of disposal. Check the specific remedy instructions for this recall for exact requirements. If you registered your product at the time of purchase, the process is usually even simpler.
If the original manufacturer has gone out of business, the recall remedy may no longer be available through them. In this case, contact CPSC directly at 1-800-638-2772 or cpsc.gov for guidance. If the brand was acquired by another company, the acquiring company may have assumed recall obligations. In some cases where a remedy is unavailable, CPSC advises consumers to safely dispose of the product. If you were injured by the product of a defunct company, consult a product liability attorney, parent companies, distributors, and retailers may still bear liability in some circumstances.