Plastic table lamps
CPSC Recall #81-029 - December 2, 1981
Recall Summary
| Recall Number | 81-029 |
| Recall Date | December 2, 1981 |
| Remedy Type | Dispose |
| Units Affected | Approximately four million |
Product
Plastic table lamps
Description
WASHINGTON, D.C. ( Dec. 3 ) -- Three firms today alerted consumers that approximately four million plastic table lamps, if misused or carelessly handled, may pose a risk of electrocution or electrical shock. The warning was issued voluntarily in cooperation with the U.S. Consumer Product Safety Commission by A-Bee Syndicate, Inc., of New York, New York; B & D Molded Products, Inc., of Shelton, Connecticut; and Injection Corporation, of Plainfield, New Jersey. CPSC staff has identified these companies as manufacturers and distributors of the lamps according to definitions in the Consumer Product Safety Act. According to the firms, the lamps were designed and manufactured in conformity with existing industry practices. They could, however, pose a potential safety hazard if the lightbulb socket is dislodged or removed from the lamp base, thereby exposing two electrical terminals positioned on either side of the socket. The lamps consist of a black plastic base with three legs which supports a plastic shade covered with bubble-like protrusions. The shades were produced in three colors: white, lime-green and neon-orange. The lamps stand approximately 16 inches tall, and some were made with the name "A-Bee" on the smooth collar at the base of the shade. The lamps were sold nationwide for approximately $1 each in variety retail stores from 1965 through 1975, although the majority were distributed in the eastern half of the U.S. Some lamps may have been given away as promotional items. Consumers who own one of the lamps should take the following steps to determine if there is a safety hazard: Unplug the lamp; Remove the shade and turn the lamp upside down. Throw the lamp away if the bulb socket falls out of the base or is loose enough to expose the electrical terminals. Anyone requiring additional information about this warning should contact CPSC's toll-free Hotline at 800-638-2772. Warning Certain of the pictured table lamps may contain a potential electrocution or shock hazard. Each lamp consists of a black, plastic three-legged base supporting a plastic shade covered with bubble-like protrusions. The shades are available in white, neon-orange, and lime-green. The lamps were distributed from 1965 through April 1975 and sold for approximately $1.00. The lamps may often be identified through the name "A-BEE" which may be visible on the smooth collar on the base of the lamp's shade. If the lamp is titled or tipped, the bulb socket may dislodge from the lamp's base, thereby exposing two copper electrical terminals. Consumers should check to see if their lamp is one affected by talking the following steps: Unplug the Lamp Remove the shade from the lamp's base Turn the lamp upside down If a bulb socket works itself loose or falls out exposing the electrical terminals, the lamp should not be used. In certain of the affected table lamps, the bulb socket may not be securely fastened to the lamp's base or may have been able to work itself loose from the lamp's base. Consumers owning one of the affected lamps are warned to immediately stop use of the lamp and remove it form children's access.
Hazard
The lamps could pose a potential safety hazard if the lightbulb socket is dislodged or removed from the lamp base, thereby exposing two electrical terminals positioned on either side of the socket.
Remedy Instructions
Consumers who own one of the lamps should take the following steps to determine if there is a safety hazard: unplug the lamp, then remove the shade and turn the lamp upside down. Throw the lamp away if the bulb socket falls out of the base or is loose enough to expose the electrical terminals.
What Should You Do?
Stop using this product immediately. Contact the manufacturer for a Dispose at no charge. If you experienced an injury, report it at SaferProducts.gov.
Frequently Asked Questions
Follow the consumer action instructions in the recall notice above. Most recalls require you to stop using the product and contact the manufacturer directly, either by calling the toll-free number listed in the official CPSC notice or by visiting the manufacturer's website. You generally do not need a receipt or original packaging to claim a remedy. The manufacturer is legally required to provide the remedy (Dispose) at no cost to you.
No, you should stop using the product entirely, not just unplug it. Electric shock and fire hazards in recalled electrical products often involve internal wiring defects, faulty components, or insulation failures that can cause harm even after the product has been off for a period of time. Do not attempt to repair the product yourself. Keep it unplugged and stored safely until you receive the manufacturer's remedy. If the product has already shown signs of overheating, sparking, or discoloration, handle it carefully and consider contacting your local fire department for guidance on safe disposal.
In most cases, no. CPSC-coordinated recall remedies are designed to be accessible without proof of purchase. Manufacturers typically ask consumers to self-certify ownership and may ask for photos of the product or its serial number. Some manufacturers request that you mail in a portion of the product (such as a cut cord or removed component) as proof of disposal. Check the specific remedy instructions for this recall for exact requirements. If you registered your product at the time of purchase, the process is usually even simpler.
If the original manufacturer has gone out of business, the recall remedy may no longer be available through them. In this case, contact CPSC directly at 1-800-638-2772 or cpsc.gov for guidance. If the brand was acquired by another company, the acquiring company may have assumed recall obligations. In some cases where a remedy is unavailable, CPSC advises consumers to safely dispose of the product. If you were injured by the product of a defunct company, consult a product liability attorney, parent companies, distributors, and retailers may still bear liability in some circumstances.