Husqvarna Viking sewing machines
CPSC Recall #00-026 - December 6, 1999
Recall Summary
| Recall Number | 00-026 |
| Recall Date | December 6, 1999 |
| Remedy Type | Inspect, Replace |
| Units Affected | About 1,100 |
Product
Husqvarna Viking sewing machines
Description
PRODUCT: Sewing Machines - Viking Sewing Machines Inc., of Cleveland, Ohio, is voluntarily recalling about 1,100 Husqvarna Viking sewing machines. These model #1+ sewing machines have "VIKING Husqvarna" and "#1+" written on the front of the machine. Authorized Viking dealers sold these sewing machines nationwide from January 1998 through September 1998 for about $4,000. Consumers should check their sewing machine's serial number, located on the bottom of the machine. The machine is part of the recall if it falls within the following ranges: Serial Number Range between 10000001 and 19999991 Serial Number Range between 20000009 and 29999999 Serial Number Range between 33600003 and 33699993 Serial Number Range between 50000002 and 59999992 PROBLEM: When removing the sewing machine's power cord from the power transformer on the sewing machine, loose pins from the power transformer could remain in the cord, posing a risk of electric shock. INCIDENTS/INJURIES: None reported. WHAT TO DO: Consumers should only unplug these machines from the wall outlet, and should not remove the power cord from the sewing machine power transformer. Consumers should call an authorized Viking dealer to arrange for a free safety inspection. If needed, the dealer will replace the defective power transformer free of charge. For additional questions, contact Viking at (800) 446-2333 between 9 a.m. and 4:30 p.m. ET Monday through Friday.
Hazard
When removing the sewing machine's power cord from the power transformer on the sewing machine, loose pins from the power transformer could remain in the cord, posing a risk of electric shock.
Incidents & Injuries
None reported.
Remedy Instructions
Consumers should only unplug these machines from the wall outlet, and should not remove the power cord from the sewing machine power transformer. Consumers should call an authorized Viking dealer to arrange for a free safety inspection. If needed, the dealer will replace the defective power transformer free of charge.
What Should You Do?
Stop using this product immediately. Contact the manufacturer for a Inspect, Replace at no charge. If you experienced an injury, report it at SaferProducts.gov.
Frequently Asked Questions
Follow the consumer action instructions in the recall notice above. Most recalls require you to stop using the product and contact the manufacturer directly, either by calling the toll-free number listed in the official CPSC notice or by visiting the manufacturer's website. You generally do not need a receipt or original packaging to claim a remedy. The manufacturer is legally required to provide the remedy (Inspect, Replace) at no cost to you.
No, you should stop using the product entirely, not just unplug it. Electric shock and fire hazards in recalled electrical products often involve internal wiring defects, faulty components, or insulation failures that can cause harm even after the product has been off for a period of time. Do not attempt to repair the product yourself. Keep it unplugged and stored safely until you receive the manufacturer's remedy. If the product has already shown signs of overheating, sparking, or discoloration, handle it carefully and consider contacting your local fire department for guidance on safe disposal.
In most cases, no. CPSC-coordinated recall remedies are designed to be accessible without proof of purchase. Manufacturers typically ask consumers to self-certify ownership and may ask for photos of the product or its serial number. Some manufacturers request that you mail in a portion of the product (such as a cut cord or removed component) as proof of disposal. Check the specific remedy instructions for this recall for exact requirements. If you registered your product at the time of purchase, the process is usually even simpler.
If the original manufacturer has gone out of business, the recall remedy may no longer be available through them. In this case, contact CPSC directly at 1-800-638-2772 or cpsc.gov for guidance. If the brand was acquired by another company, the acquiring company may have assumed recall obligations. In some cases where a remedy is unavailable, CPSC advises consumers to safely dispose of the product. If you were injured by the product of a defunct company, consult a product liability attorney, parent companies, distributors, and retailers may still bear liability in some circumstances.