Electric wrenches

CPSC Recall #01-208 — July 26, 2001

Recall Summary

Recall Number01-208
Recall DateJuly 26, 2001
Remedy TypeRepair
Units AffectedAbout 6,000

Where It Was Sold

Home centers
hardware stores
and industrial distributors nationwide sold these wrenches from March 2001 to July 2001 for between $180 and $280.

Product

Electric wrenches

Description

WASHINGTON, D.C. - In cooperation with the U.S. Consumer Product Safety Commission (CPSC), Milwaukee Electric Tool Corp., of Brookfield, Wis., is voluntarily recalling about 6,000 electric wrenches. The wrenches have power cords that can release from the handle, posing an injury or electrocution hazard to consumers.Milwaukee and CPSC have not received any reports of incidents. This recall is being conducted to prevent the possibility of injuries.The recalled impact wrenches are shaped like drills, but use a forward/reverse (impact) action to tighten/loosen bolts. The wrenches have a red handle, a red and gray body, and the name "Milwaukee" printed on the drill. The model and serial numbers included in this recall can be found on the nameplate located on the body of the tool. Model NumbersSerial Numbers9070-20229A401010001 thru 229A4012507229071-20239A401010001 thru 239A4012504049075-20230A401010001 thru 230A401260104Home centers, hardware stores, and industrial distributors nationwide sold these wrenches from March 2001 to July 2001 for between $180 and $280.Consumers should stop using these electric wrenches immediately and return them to the nearest Milwaukee Factory Service Center or authorized power tool service center for a free repair. Consumers also can call Milwaukee toll-free at (866) 473-2288 between 8 a.m. and 4:30 p.m. CT Monday through Friday. Consumers can locate the nearest service facility by visiting the company's website at www.mil-electric-tool.com.Wrenches that have a "X" stamped or etched on the nameplate next to the serial number have already been repaired.

Hazard

The wrenches have power cords that can release from the handle, posing an injury or electrocution hazard to consumers.

Incidents & Injuries

Milwaukee and CPSC have not received any reports of incidents.

Remedy Instructions

Consumers should stop using these electric wrenches immediately and return them to the nearest Milwaukee Factory Service Center or authorized power tool service center for a free repair.

What Should You Do?

Stop using this product immediately. Contact the manufacturer for a Repair at no charge. If you experienced an injury, report it at SaferProducts.gov.

Frequently Asked Questions

Follow the consumer action instructions in the recall notice above. Most recalls require you to stop using the product and contact the manufacturer directly — either by calling the toll-free number listed in the official CPSC notice or by visiting the manufacturer's website. You generally do not need a receipt or original packaging to claim a remedy. The manufacturer is legally required to provide the remedy (Repair) at no cost to you.

No — you should stop using the product entirely, not just unplug it. Electric shock and fire hazards in recalled electrical products often involve internal wiring defects, faulty components, or insulation failures that can cause harm even after the product has been off for a period of time. Do not attempt to repair the product yourself. Keep it unplugged and stored safely until you receive the manufacturer's remedy. If the product has already shown signs of overheating, sparking, or discoloration, handle it carefully and consider contacting your local fire department for guidance on safe disposal.

In most cases, no. CPSC-coordinated recall remedies are designed to be accessible without proof of purchase. Manufacturers typically ask consumers to self-certify ownership and may ask for photos of the product or its serial number. Some manufacturers request that you mail in a portion of the product (such as a cut cord or removed component) as proof of disposal. Check the specific remedy instructions for this recall for exact requirements. If you registered your product at the time of purchase, the process is usually even simpler.

If the original manufacturer has gone out of business, the recall remedy may no longer be available through them. In this case, contact CPSC directly at 1-800-638-2772 or cpsc.gov for guidance. If the brand was acquired by another company, the acquiring company may have assumed recall obligations. In some cases where a remedy is unavailable, CPSC advises consumers to safely dispose of the product. If you were injured by the product of a defunct company, consult a product liability attorney — parent companies, distributors, and retailers may still bear liability in some circumstances.