DEWALT Model DW660 Cut-Out Tools
CPSC Recall #07-067 - December 20, 2006
Recall Summary
| Recall Number | 07-067 |
| Recall Date | December 20, 2006 |
| Remedy Type | Inspect, Repair |
| Units Affected | About 81,000 |
| Manufacturer | DEWALT Industrial Tool Co., of Towson, Md. |
| Manufactured In | Mexico |
Where It Was Sold
| Major home center and hardware stores nationwide from January 2006 through November 2006 for between $70 and $130 |
| depending on the kit. |
Product
DEWALT Model DW660 Cut-Out Tools
Description
WASHINGTON, D.C. - In cooperation with the U.S. Consumer Product Safety Commission (CPSC), DEWALT Industrial Tool Co., of Towson, Md., is voluntarily recalling about 81,000 DEWALT Model DW660 Cut-Out Tools. The cord wire in these units could be damaged internally, posing a shock hazard to consumers.Name of Product: DEWALT Model DW660 Cut-Out ToolsUnits: About 81,000Manufacturer: DEWALT Industrial Tool Co., of Towson, Md.Hazard: The cord wire in these units could be damaged internally, posing a shock hazard to consumers.Incidents/Injuries: DEWALT has not received any reports of incidents or injuries related to this issue.Description: These DEWALT cut-out tools are yellow and black, and have model number DW660 written on their nameplate, which is located on the body of the unit. The recalled tools were manufactured between January 2006 and September 2006, and have date codes ranging from 200601 to 200639. The date code also is located on the tool's nameplate. Units with a "V" stamped on the nameplate are not included in this recall.Sold at: Major home center and hardware stores nationwide from January 2006 through November 2006 for between $70 and $130, depending on the kit.Manufactured in: MexicoRemedy: Consumers should stop using the cut-out tool immediately and contact DEWALT for the location of the nearest service center to receive a free inspection and repair, if necessary.Customer Contact: For additional information, consumers can contact DEWALT toll-free at (888) 263-9051 between 8 a.m. and 5 p.m. ET Monday through Friday, or visit the DEWALT Web site at www.DEWALT.com.
Hazard
The cord wire in these units could be damaged internally, posing a shock hazard to consumers.
Incidents & Injuries
DEWALT has not received any reports of incidents or injuries related to this issue.
Remedy Instructions
Consumers should stop using the cut-out tool immediately and contact DEWALT for the location of the nearest service center to receive a free inspection and repair, if necessary.
What Should You Do?
Stop using this product immediately. Contact the manufacturer for a Inspect, Repair at no charge. If you experienced an injury, report it at SaferProducts.gov.
Frequently Asked Questions
Follow the consumer action instructions in the recall notice above. Most recalls require you to stop using the product and contact the manufacturer directly, either by calling the toll-free number listed in the official CPSC notice or by visiting the manufacturer's website. You generally do not need a receipt or original packaging to claim a remedy. The manufacturer is legally required to provide the remedy (Inspect, Repair) at no cost to you.
No, you should stop using the product entirely, not just unplug it. Electric shock and fire hazards in recalled electrical products often involve internal wiring defects, faulty components, or insulation failures that can cause harm even after the product has been off for a period of time. Do not attempt to repair the product yourself. Keep it unplugged and stored safely until you receive the manufacturer's remedy. If the product has already shown signs of overheating, sparking, or discoloration, handle it carefully and consider contacting your local fire department for guidance on safe disposal.
In most cases, no. CPSC-coordinated recall remedies are designed to be accessible without proof of purchase. Manufacturers typically ask consumers to self-certify ownership and may ask for photos of the product or its serial number. Some manufacturers request that you mail in a portion of the product (such as a cut cord or removed component) as proof of disposal. Check the specific remedy instructions for this recall for exact requirements. If you registered your product at the time of purchase, the process is usually even simpler.
If the original manufacturer has gone out of business, the recall remedy may no longer be available through them. In this case, contact CPSC directly at 1-800-638-2772 or cpsc.gov for guidance. If the brand was acquired by another company, the acquiring company may have assumed recall obligations. In some cases where a remedy is unavailable, CPSC advises consumers to safely dispose of the product. If you were injured by the product of a defunct company, consult a product liability attorney, parent companies, distributors, and retailers may still bear liability in some circumstances.