DeWalt battery chargers, model DW9116
CPSC Recall #01-010 — October 11, 2000
Recall Summary
| Recall Number | 01-010 |
| Recall Date | October 11, 2000 |
| Remedy Type | Repair |
| Units Affected | About 825,000 |
Where It Was Sold
| Home center and hardware stores sold these battery chargers nationwide from September 1999 through August 2000 for between $49 and $69. During the same period |
| chargers also were sold with some DeWALT cordless tools. |
Product
DeWalt battery chargers, model DW9116
Description
WASHINGTON, D.C. - In cooperation with the U.S. Consumer Product Safety Commission (CPSC), DeWALT® Industrial Tool Co., of Baltimore, Md., is voluntarily recalling about 825,000 battery chargers (model DW9116) for repair. These chargers are for 9.6- to 18-volt batteries used with DeWALT cordless tools. Metal clips inside the chargers could come loose and stick through the chargers' vents, possibly resulting in consumers receiving an electrical shock. DeWALT has not received any reports of injuries with these chargers. This recall is being conducted to prevent the possibility of injuries. The battery chargers are model number DW9116, which is written on the front and bottom of the charger housing. The chargers are black with yellow lettering. "DeWALT" is written on the front of the chargers. The recalled chargers have date codes from 9927EM through 9952EM and 0001EM through 0031EM located on the bottom of the charger. Chargers with a yellow or green dot sticker near the date code already have been repaired, and are not recalled. Home center and hardware stores sold these battery chargers nationwide from September 1999 through August 2000 for between $49 and $69. During the same period, chargers also were sold with some DeWALT cordless tools. Consumers should stop using these battery chargers immediately, and take them to a DeWALT or Black & Decker service center for a free repair. To locate the nearest service center, or for more information, call DeWALT toll-free at (888) 388-3273 between 8 a.m. and 4:30 p.m. ET Monday through Friday.
Hazard
Metal clips inside the chargers could come loose and stick through the chargers' vents, possibly resulting in consumers receiving an electrical shock.
Incidents & Injuries
DeWALT has not received any reports of injuries with these chargers. This recall is being conducted to prevent the possibility of injuries.
Remedy Instructions
Consumers should stop using these battery chargers immediately, and take them to a DeWALT or Black & Decker service center for a free repair.
What Should You Do?
Stop using this product immediately. Contact the manufacturer for a Repair at no charge. If you experienced an injury, report it at SaferProducts.gov.
Frequently Asked Questions
Follow the consumer action instructions in the recall notice above. Most recalls require you to stop using the product and contact the manufacturer directly — either by calling the toll-free number listed in the official CPSC notice or by visiting the manufacturer's website. You generally do not need a receipt or original packaging to claim a remedy. The manufacturer is legally required to provide the remedy (Repair) at no cost to you.
No — you should stop using the product entirely, not just unplug it. Electric shock and fire hazards in recalled electrical products often involve internal wiring defects, faulty components, or insulation failures that can cause harm even after the product has been off for a period of time. Do not attempt to repair the product yourself. Keep it unplugged and stored safely until you receive the manufacturer's remedy. If the product has already shown signs of overheating, sparking, or discoloration, handle it carefully and consider contacting your local fire department for guidance on safe disposal.
In most cases, no. CPSC-coordinated recall remedies are designed to be accessible without proof of purchase. Manufacturers typically ask consumers to self-certify ownership and may ask for photos of the product or its serial number. Some manufacturers request that you mail in a portion of the product (such as a cut cord or removed component) as proof of disposal. Check the specific remedy instructions for this recall for exact requirements. If you registered your product at the time of purchase, the process is usually even simpler.
If the original manufacturer has gone out of business, the recall remedy may no longer be available through them. In this case, contact CPSC directly at 1-800-638-2772 or cpsc.gov for guidance. If the brand was acquired by another company, the acquiring company may have assumed recall obligations. In some cases where a remedy is unavailable, CPSC advises consumers to safely dispose of the product. If you were injured by the product of a defunct company, consult a product liability attorney — parent companies, distributors, and retailers may still bear liability in some circumstances.