Dayton Electric Baseboard Heaters

CPSC Recall #10-745 — July 5, 2010

Recall Summary

Recall Number10-745
Recall DateJuly 5, 2010
Remedy TypeInspect, Replace
Units AffectedAbout 30
ManufacturerMarley Engineered Products LLC, of Bennettsville, S.C.
Manufactured InUnited States

Where It Was Sold

Grainger branch stores nationwide from December 2009 through March 2010 for about $50. 

Product

Dayton Electric Baseboard Heaters

Description

This recall involves Dayton 240/208 volt model 3UG82D electric baseboard heaters. The white, rectangular heaters are 30 inches long by 6 3/4 inches high by 2 7/8 inches deep. A nameplate on the bottom right side of the base has "Dayton Electric Mfg. Co.," model 3UG82D and date code 1209. Only heaters purchased after December 21, 2009 with a date code of "1209" are included in this recall. The recalled heaters have yellow and white wires inside the panel where the heater connects to the power source. Heaters with red and black wire are not included in this recall.

Hazard

The baseboard heaters are labeled for 240 or 208 volt use. However, some of the heaters have an internal heater built for a maximum of 120 volts. If the heater is connected to a 240 or 208 volt electrical circuit as directed, the unit could catch fire.

Incidents & Injuries

None reported.

Remedy Instructions

Consumers should immediately stop using the heaters and inspect the product's nameplate to determine whether it is involved in the recall. Consumers with affected heaters should disconnect the product at the circuit breaker or fuse. A qualified electrician should inspect the color of the wires inside the heater's electrical access panel to determine if the wires are yellow and white. Consumers should return the affected heaters to Marley for a free replacement. Marley will pay reasonable labor charges required to inspect and exchange units. Marley is directly notifying known consumers.

What Should You Do?

Stop using this product immediately. Contact the manufacturer for a Inspect, Replace at no charge. If you experienced an injury, report it at SaferProducts.gov.

Frequently Asked Questions

Follow the consumer action instructions in the recall notice above. Most recalls require you to stop using the product and contact the manufacturer directly — either by calling the toll-free number listed in the official CPSC notice or by visiting the manufacturer's website. You generally do not need a receipt or original packaging to claim a remedy. The manufacturer is legally required to provide the remedy (Inspect, Replace) at no cost to you.

If the product caused a fire or burn injury, document the incident with photos and preserve the product if it is safe to do so. Report the incident to the CPSC at SaferProducts.gov and to your local fire department. Contact the manufacturer to inform them of the incident — they are required to track and report injuries to CPSC. You may also want to consult a personal injury attorney, as fire and burn injuries caused by defective products can be grounds for a product liability claim against the manufacturer.

In most cases, no. CPSC-coordinated recall remedies are designed to be accessible without proof of purchase. Manufacturers typically ask consumers to self-certify ownership and may ask for photos of the product or its serial number. Some manufacturers request that you mail in a portion of the product (such as a cut cord or removed component) as proof of disposal. Check the specific remedy instructions for this recall for exact requirements. If you registered your product at the time of purchase, the process is usually even simpler.

If the original manufacturer has gone out of business, the recall remedy may no longer be available through them. In this case, contact CPSC directly at 1-800-638-2772 or cpsc.gov for guidance. If the brand was acquired by another company, the acquiring company may have assumed recall obligations. In some cases where a remedy is unavailable, CPSC advises consumers to safely dispose of the product. If you were injured by the product of a defunct company, consult a product liability attorney — parent companies, distributors, and retailers may still bear liability in some circumstances.