six-inch bench grinders
CPSC Recall #78-074 - August 29, 1978
Recall Summary
| Recall Number | 78-074 |
| Recall Date | August 29, 1978 |
| Remedy Type | Repair |
Product
six-inch bench grinders
Description
The repair program applies to the following models of six-inch bench grinders purchased after June 1973 and not showing any three-digit date code embossed on the nameplate (e.g., 57C): Manning Bowman model 715100, Toastmaster model 5577, Power House model 711100, J. C. Penney model 4030, Western Auto-Wizzard model POE 6203A, Ward's Power Kraft model TGB-5102A, and K-Mart model 30-09Tl. Also involved are K-Mart model 30-90Tl showing the date code 77B, 77D, 77E or 77F, and Ward's Power Kraft model TGB 5102A with the 77F date code embossed on the nameplate. Tools having these date codes and containing an orange inspection sticker on the carton or the unit have already been inspected and are not involved in the repair program.
Hazard
A protective sleeve insulating a lead wire may wear through on some of the units, bringing the wire into direct contact with the motor shaft and possibly resulting in severe shock if the tool is not properly grounded and if the user is grounded or touching a grounded metal object such as a water pipe. Two cases have been reported where the insulation has worn through, one of which resulted in a shock.
Incidents & Injuries
Two cases have been reported where the insulation has worn through, one of which resulted in a shock.
Remedy Instructions
Anyone owning one of these bench grinders should temporarily stop use and write to: Bench Grinder Repair Program, c/o National Service Manager, Portable Appliance and Tool Group, McGraw-Edison Co., 2nd and Vine St., Boonville, Mo. 65233, to get instructions for having the unit checked and repaired free-of-charge. To verify brand names and model numbers, consumers may contact CPSC's toll-free Hotline at 800/638-2772.
What Should You Do?
Stop using this product immediately. Contact the manufacturer for a Repair at no charge. If you experienced an injury, report it at SaferProducts.gov.
Frequently Asked Questions
Follow the consumer action instructions in the recall notice above. Most recalls require you to stop using the product and contact the manufacturer directly, either by calling the toll-free number listed in the official CPSC notice or by visiting the manufacturer's website. You generally do not need a receipt or original packaging to claim a remedy. The manufacturer is legally required to provide the remedy (Repair) at no cost to you.
No, you should stop using the product entirely, not just unplug it. Electric shock and fire hazards in recalled electrical products often involve internal wiring defects, faulty components, or insulation failures that can cause harm even after the product has been off for a period of time. Do not attempt to repair the product yourself. Keep it unplugged and stored safely until you receive the manufacturer's remedy. If the product has already shown signs of overheating, sparking, or discoloration, handle it carefully and consider contacting your local fire department for guidance on safe disposal.
In most cases, no. CPSC-coordinated recall remedies are designed to be accessible without proof of purchase. Manufacturers typically ask consumers to self-certify ownership and may ask for photos of the product or its serial number. Some manufacturers request that you mail in a portion of the product (such as a cut cord or removed component) as proof of disposal. Check the specific remedy instructions for this recall for exact requirements. If you registered your product at the time of purchase, the process is usually even simpler.
If the original manufacturer has gone out of business, the recall remedy may no longer be available through them. In this case, contact CPSC directly at 1-800-638-2772 or cpsc.gov for guidance. If the brand was acquired by another company, the acquiring company may have assumed recall obligations. In some cases where a remedy is unavailable, CPSC advises consumers to safely dispose of the product. If you were injured by the product of a defunct company, consult a product liability attorney, parent companies, distributors, and retailers may still bear liability in some circumstances.