Fimco Electric Pressure Washers
CPSC Recall #84-064 - October 31, 1984
Recall Summary
| Recall Number | 84-064 |
| Recall Date | October 31, 1984 |
| Remedy Type | New Instructions, Repair |
| Units Affected | Approximately 14,150 |
Where It Was Sold
| The affected washers were sold nationally under the "Big Butch" trade name by various retailers and under the Sears brand name through Sears catalogs. |
Product
Fimco Electric Pressure Washers
Description
WASHINGTON, D.C. -- In cooperation with the U.S. Consumer Product Safety Commission, Fimco, Inc., of Sioux City, Iowa, today announced that it will voluntarily provide safety kits to modify the handles of its approximately 14,150 electric pressure washers purchased before January 1984. The affected washers, which pump water under high pressure to clean porches, houses, motor vehicles, outdoor power equipment or farm equipment, were sold nationally under the "Big Butch" trade name by various retailers and under the Sears brand name through Sears catalogs.There have been no injuries or deaths involving the Fimco machines; however; the Commission is aware of 10 electrocutions associated with other electric pressure washers.The washer does not present a hazard if operated according to instructions, according to Fimco. However, the metal handle or other exposed metal part could become electrically charged if the machine is not properly grounded and a fault occurs. Such fault could occur if an improper or faulty extension cord is used, if the connection between the power cord and an extension cord becomes wet or if a fault exists within the pressure washer's electrical system. Under these circumstances, a severe or fatal electric shock could result when the user touches the metal handle or other exposed metal part of the machine.The safety kit being offered consists of four easy to install insulated bolts that replace existing bolts.Consumers should call FIMCO toll-free at 800-831-0027 (in Iowa call 800-352-0016) to obtain the free kit and complete instructions. Consumers may also call the CPSC toll-free Hotline for information or assistance at 800-638-CPSC. The Commission's teletypewriter number for the hearing-impaired is (800) 638-8270.
Hazard
The metal handle or other exposed metal part could become electrically charged if the machine is not properly grounded and a fault occurs. Such fault could occur if an improper or faulty extension cord is used, if the connection between the power cord and an extension cord becomes wet or if a fault exists within the pressure washer's electrical system. Under these circumstances, a severe or fatal electric shock could result when the user touches the metal handle or other exposed metal part of the machine.
Incidents & Injuries
There have been no injuries or deaths involving the Fimco machines; however; the Commission is aware of 10 electrocutions associated with other electric pressure washers.
Remedy Instructions
The safety kit being offered consists of four easy to install insulated bolts that replace existing bolts. Consumers should call FIMCO toll-free at 800-831-0027 (in Iowa call 800-352-0016) to obtain the free kit and complete instructions.
What Should You Do?
Stop using this product immediately. Contact the manufacturer for a New Instructions, Repair at no charge. If you experienced an injury, report it at SaferProducts.gov.
Frequently Asked Questions
Follow the consumer action instructions in the recall notice above. Most recalls require you to stop using the product and contact the manufacturer directly, either by calling the toll-free number listed in the official CPSC notice or by visiting the manufacturer's website. You generally do not need a receipt or original packaging to claim a remedy. The manufacturer is legally required to provide the remedy (New Instructions, Repair) at no cost to you.
No, you should stop using the product entirely, not just unplug it. Electric shock and fire hazards in recalled electrical products often involve internal wiring defects, faulty components, or insulation failures that can cause harm even after the product has been off for a period of time. Do not attempt to repair the product yourself. Keep it unplugged and stored safely until you receive the manufacturer's remedy. If the product has already shown signs of overheating, sparking, or discoloration, handle it carefully and consider contacting your local fire department for guidance on safe disposal.
In most cases, no. CPSC-coordinated recall remedies are designed to be accessible without proof of purchase. Manufacturers typically ask consumers to self-certify ownership and may ask for photos of the product or its serial number. Some manufacturers request that you mail in a portion of the product (such as a cut cord or removed component) as proof of disposal. Check the specific remedy instructions for this recall for exact requirements. If you registered your product at the time of purchase, the process is usually even simpler.
If the original manufacturer has gone out of business, the recall remedy may no longer be available through them. In this case, contact CPSC directly at 1-800-638-2772 or cpsc.gov for guidance. If the brand was acquired by another company, the acquiring company may have assumed recall obligations. In some cases where a remedy is unavailable, CPSC advises consumers to safely dispose of the product. If you were injured by the product of a defunct company, consult a product liability attorney, parent companies, distributors, and retailers may still bear liability in some circumstances.