1995 GT "Aggressor" model bicycle forks
CPSC Recall #95-122 — May 16, 1995
Recall Summary
| Recall Number | 95-122 |
| Recall Date | May 16, 1995 |
| Remedy Type | Inspect, Replace |
| Units Affected | Approximately 4,000 |
| Manufacturer | Polygon Industries, Inc. of Taiwan, R.O.C. |
| Manufactured In | Taiwan |
Where It Was Sold
| One thousand GT-authorized retailers sold the bicycles nationwide between October 1994 and March 1995 for about $400.00. |
Product
1995 GT "Aggressor" model bicycle forks
Description
WASHINGTON, DC - CPSC, GT Bicycles Inc. of Santa Ana, Calif., is announcing an inspection and repair program for the forks on all 1995 GT "Aggressor" model bicycles. This inspection program affects approximately 4,000 bicycles, which are equipped with forks made by Polygon Industries, Inc. of Taiwan, R.O.C. The forks could break during use causing the rider to lose control of the bicycle and fall. CPSC is aware of 13 incidents in which bolts in the bicycles loosened, causing the bicycle forks to break. Although no serious injuries have been reported, the potential for injury is significant. One thousand GT-authorized retailers sold the bicycles nationwide between October 1994 and March 1995 for about $400.00. The bicycles, which have either a bright blue or candy red finish with "Aggressor" written on the frame, sold in adult sizes from 14 1/2 inches to 22 inches. CPSC and GT Bicycles are instructing consumers to stop using their 1995 GT "Aggressor" bikes and bring them to any authorized GT Bicycles dealer for a free inspection. Dealers will inspect the bicycles, tighten any loose bolts, and replace damaged forks at no cost to the consumer. For more information, consumers can call GT Bicycles at (800) 743-3248. Media inquiries should be directed to either Aaron Raines or Bill Galloway at the same telephone number.
Hazard
The forks could break during use causing the rider to lose control of the bicycle and fall.
Incidents & Injuries
CPSC is aware of 13 incidents in which bolts in the bicycles loosened, causing the bicycle forks to break. Although no serious injuries have been reported, the potential for injury is significant.
Remedy Instructions
CPSC and GT Bicycles are instructing consumers to stop using their 1995 GT "Aggressor" bikes and bring them to any authorized GT Bicycles dealer for a free inspection. Dealers will inspect the bicycles, tighten any loose bolts, and replace damaged forks at no cost to the consumer.
What Should You Do?
Stop using this product immediately. Contact the manufacturer for a Inspect, Replace at no charge. If you experienced an injury, report it at SaferProducts.gov.
Frequently Asked Questions
Follow the consumer action instructions in the recall notice above. Most recalls require you to stop using the product and contact the manufacturer directly — either by calling the toll-free number listed in the official CPSC notice or by visiting the manufacturer's website. You generally do not need a receipt or original packaging to claim a remedy. The manufacturer is legally required to provide the remedy (Inspect, Replace) at no cost to you.
Furniture tip-overs are a leading cause of pediatric injuries in the U.S., particularly dressers, bookcases, and television stands. CPSC data shows that a child dies approximately every two weeks from a furniture or TV tip-over. Unstable high chairs, baby swings, and bouncers are also frequent recall subjects due to fall risks. ASTM International standards now require that certain furniture must meet tip-over resistance standards, and CPSC has been actively pursuing mandatory requirements for dressers and chests. If you have furniture that was not recalled but feels unstable, wall-anchoring kits are widely available at hardware stores.
In most cases, no. CPSC-coordinated recall remedies are designed to be accessible without proof of purchase. Manufacturers typically ask consumers to self-certify ownership and may ask for photos of the product or its serial number. Some manufacturers request that you mail in a portion of the product (such as a cut cord or removed component) as proof of disposal. Check the specific remedy instructions for this recall for exact requirements. If you registered your product at the time of purchase, the process is usually even simpler.
If the original manufacturer has gone out of business, the recall remedy may no longer be available through them. In this case, contact CPSC directly at 1-800-638-2772 or cpsc.gov for guidance. If the brand was acquired by another company, the acquiring company may have assumed recall obligations. In some cases where a remedy is unavailable, CPSC advises consumers to safely dispose of the product. If you were injured by the product of a defunct company, consult a product liability attorney — parent companies, distributors, and retailers may still bear liability in some circumstances.