Milwaukee 4-1/2" Mag series sander/grinders

CPSC Recall #96-002 - October 9, 1995

Recall Summary

Recall Number96-002
Recall DateOctober 9, 1995
Remedy TypeReplace
Units AffectedApproximately 9,300

Where It Was Sold

The sander/grinders were sold from July 1
1995 to September 30
1995 for about $120 each through construction and industrial distributors
home centers
and hardware stores nationwide.

Product

Milwaukee 4-1/2" Mag series sander/grinders

Description

WASHINGTON, D.C. - In cooperation with the U.S. Consumer Product Safety Commission (CPSC), Milwaukee Electric Tool Corporation of Brookfield, Wis., is recalling approximately 9,300 sander/grinders. A switch on the tools may stick "on" or may "turn on" with minimal trigger pressure, which could subject the tool operator to injury. Milwaukee 4-1/2" Mag series sander/grinders with nameplate catalog numbers 6148 or 6151, and packaging catalog numbers 6148-6, 6149-6, and 6151 are included in this recall. The nameplate catalog number is found on the label located on top of the sander/grinder, and the packaging label is found on the side of the box the tool is purchased in. Milwaukee Electric has not received any reports of injury involving the sander/grinders. The sander/grinders were sold from July 1, 1995 to September 30, 1995 for about $120 each through construction and industrial distributors, home centers, and hardware stores nationwide. Consumers who own a recalled sander/grinder should return it for a replacement to the place of purchase, or to Milwaukee Electric Tool Corporation at 8950 Hacks Cross Road, Olive Branch, Miss. 38654, or to the nearest Milwaukee Branch Office/Service Center. If it is necessary to ship 4-1/2" Mag Series sander/grinders, Milwaukee recommends that returns be made via United parcel Service (UPS). Milwaukee will reimburse tool owners for shipping expenses. Consumers should not use UPS/C.O.D. returns for shipping charges. For more information, or for the location of the nearest Milwaukee Branch Office/Service Center, consumers should contact Milwaukee Product Service staff at (800) 274-9804 between 8 am and 4:30 pm CDT.

Hazard

A switch on the tools may stick "on" or may "turn on" with minimal trigger pressure, which could subject the tool operator to injury.

Incidents & Injuries

Milwaukee Electric has not received any reports of injury involving the sander/grinders.

Remedy Instructions

Consumers who own a recalled sander/grinder should return it for a replacement to the place of purchase, or to Milwaukee Electric Tool Corporation at 8950 Hacks Cross Road, Olive Branch, Miss. 38654, or to the nearest Milwaukee Branch Office/Service Center.

What Should You Do?

Stop using this product immediately. Contact the manufacturer for a Replace at no charge. If you experienced an injury, report it at SaferProducts.gov.

Frequently Asked Questions

Follow the consumer action instructions in the recall notice above. Most recalls require you to stop using the product and contact the manufacturer directly, either by calling the toll-free number listed in the official CPSC notice or by visiting the manufacturer's website. You generally do not need a receipt or original packaging to claim a remedy. The manufacturer is legally required to provide the remedy (Replace) at no cost to you.

Yes. If you were injured by a defective consumer product, whether recalled or not, you may have grounds for a product liability claim against the manufacturer and potentially the retailer. A recall notice can serve as evidence that the manufacturer was aware of the defect. Injuries that may support a claim include burns, lacerations, fractures, electric shock, choking incidents, and chemical exposure. Most product liability attorneys work on a contingency fee basis, meaning you pay nothing unless you win. Consult an attorney promptly, as statutes of limitation vary by state.

In most cases, no. CPSC-coordinated recall remedies are designed to be accessible without proof of purchase. Manufacturers typically ask consumers to self-certify ownership and may ask for photos of the product or its serial number. Some manufacturers request that you mail in a portion of the product (such as a cut cord or removed component) as proof of disposal. Check the specific remedy instructions for this recall for exact requirements. If you registered your product at the time of purchase, the process is usually even simpler.

If the original manufacturer has gone out of business, the recall remedy may no longer be available through them. In this case, contact CPSC directly at 1-800-638-2772 or cpsc.gov for guidance. If the brand was acquired by another company, the acquiring company may have assumed recall obligations. In some cases where a remedy is unavailable, CPSC advises consumers to safely dispose of the product. If you were injured by the product of a defunct company, consult a product liability attorney, parent companies, distributors, and retailers may still bear liability in some circumstances.