Gas Water Heater Temperature Control
CPSC Recall #96-070 — February 14, 1996
Recall Summary
| Recall Number | 96-070 |
| Recall Date | February 14, 1996 |
| Remedy Type | Inspect, Replace |
| Units Affected | Approximately 1.6 million |
Product
Gas Water Heater Temperature Control
Description
WASHINGTON, D.C. - In cooperation with the U.S. Consumer Product Safety Commission (CPSC), White-Rodgers, a division of Emerson Electric Co., St. Louis, Mo., is replacing certain White-Rodgers Model 37 and 37C natural gas water heater temperature controls manufactured between March 1994 and October 1994. Soot can build up on the water heater burner, presenting a fire hazard. Approximately 1.6 million valves were manufactured during this period. White-Rodgers has received 32 reports of such sooting. Twenty-three of these reports alleged charring or fire, but there have been no injuries. The temperature controls resemble a small metal box located above the access panel door of the natural gas water heater. A white label located on the right side of the box contains the model number, which begins with the number "37." Retail distributors and independent servicers have installed the controls since April 1994. Consumers should check their water heaters for signs of malfunction. Signs that the heater should be inspected include: discoloration or black soot on the lower outside surface on the front, sides or back of water heater; a pilot flame that keeps extinguishing; or an unusual burning odor around the water heater. Consumers who own water heaters with these signs should use a mirror to identify the date code located in the upper left corner on the back of the metal box. Consumers who own controls with dates code 9412 to 9440 (12th week of 1994 to 40th week of 1994) should call White-Rodgers at (800) 426-3503 to arrange for a qualified service technician to inspect and, if necessary, replace the control free of charge. Warning!: DO NOT attempt to replace the gas water heater temperature control or service the water heater if you are not specifically trained to do this. Natural gas may leak from the control, and if ignited, could catch fire. CPSC and White Rodgers remind consumers to always keep the area immediately surrounding gas water heaters free of combustible materials.
Hazard
Soot can build up on the water heater burner, presenting a fire hazard. Approximately 1.6 million valves were manufactured during this period.
Incidents & Injuries
White-Rodgers has received 32 reports of such sooting. Twenty-three of these reports alleged charring or fire, but there have been no injuries.
Remedy Instructions
Consumers who own water heaters with these signs should use a mirror to identify the date code located in the upper left corner on the back of the metal box. Consumers who own controls with dates code 9412 to 9440 (12th week of 1994 to 40th week of 1994) should call White-Rodgers at (800) 426-3503 to arrange for a qualified service technician to inspect and, if necessary, replace the control free of charge.
What Should You Do?
Stop using this product immediately. Contact the manufacturer for a Inspect, Replace at no charge. If you experienced an injury, report it at SaferProducts.gov.
Frequently Asked Questions
Follow the consumer action instructions in the recall notice above. Most recalls require you to stop using the product and contact the manufacturer directly — either by calling the toll-free number listed in the official CPSC notice or by visiting the manufacturer's website. You generally do not need a receipt or original packaging to claim a remedy. The manufacturer is legally required to provide the remedy (Inspect, Replace) at no cost to you.
If the product caused a fire or burn injury, document the incident with photos and preserve the product if it is safe to do so. Report the incident to the CPSC at SaferProducts.gov and to your local fire department. Contact the manufacturer to inform them of the incident — they are required to track and report injuries to CPSC. You may also want to consult a personal injury attorney, as fire and burn injuries caused by defective products can be grounds for a product liability claim against the manufacturer.
In most cases, no. CPSC-coordinated recall remedies are designed to be accessible without proof of purchase. Manufacturers typically ask consumers to self-certify ownership and may ask for photos of the product or its serial number. Some manufacturers request that you mail in a portion of the product (such as a cut cord or removed component) as proof of disposal. Check the specific remedy instructions for this recall for exact requirements. If you registered your product at the time of purchase, the process is usually even simpler.
If the original manufacturer has gone out of business, the recall remedy may no longer be available through them. In this case, contact CPSC directly at 1-800-638-2772 or cpsc.gov for guidance. If the brand was acquired by another company, the acquiring company may have assumed recall obligations. In some cases where a remedy is unavailable, CPSC advises consumers to safely dispose of the product. If you were injured by the product of a defunct company, consult a product liability attorney — parent companies, distributors, and retailers may still bear liability in some circumstances.