DW9104 and DW9106 One-Hour Battery Chargers
CPSC Recall #96176 — July 31, 1996
Recall Summary
| Recall Number | 96176 |
| Recall Date | July 31, 1996 |
| Remedy Type | Replace |
| Units Affected | Approximately 150,000 |
Where It Was Sold
| Hardware stores and home centers sold the chargers nationwide between August 1995 and April 1996 for between $39 and $59. |
Product
DW9104 and DW9106 One-Hour Battery Chargers
Description
WASHINGTON, D.C. - CPSC, Dewalt Industrial Tool Co. of Hampstead, Md., is announcing a recall of approximately 150,000 DW9104 and DW9106 one-hour battery chargers. The charger's plastic housing could separate during a severe impact, exposing internal electrical components that could present an electric shock hazard. Dewalt has not received any reports of the charger breaking, or injuries involving the charger. This recall is being conducted to prevent the possibility of injury. Only some DW9104 and DW9106 one-hour battery chargers are subject to this recall. The recalled chargers can be identified by the fact that both the top and bottom halves of the charger are black, the bottom of the charger is stamped with a date code between 9534 and 9615, and there is a circular depression 1-3/8" in diameter located under the center of the label on the top of the charger housing. DW9104 and DW9106 chargers measure approximately five inches deep, three inches high, and four inches wide, and have a label on top with yellow lettering that reads in part, "DEWALT." Hardware stores and home centers sold the chargers nationwide between August 1995 and April 1996 for between $39 and $59. During the same period, hardware stores and home centers also sold the chargers in kits with some rechargeable cordless tools. No other Dewalt Tool chargers are involved in this recall. Owners of the identified chargers should return them to a Black & Decker/Dewalt Service Center for a free replacement one-hour battery charger. To locate the nearest service center, or for more information, owners should call (800) 540-2626. Media inquiries should be directed to Jean Miskimmon at (410) 625-2621.
Hazard
The charger's plastic housing could separate during a severe impact, exposing internal electrical components that could present an electric shock hazard.
Incidents & Injuries
Dewalt has not received any reports of the charger breaking, or injuries involving the charger. This recall is being conducted to prevent the possibility of injury.
Remedy Instructions
Owners of the identified chargers should return them to a Black & Decker/Dewalt Service Center for a free replacement one-hour battery charger. To locate the nearest service center, or for more information, owners should call (800) 540-2626.
What Should You Do?
Stop using this product immediately. Contact the manufacturer for a Replace at no charge. If you experienced an injury, report it at SaferProducts.gov.
Frequently Asked Questions
Follow the consumer action instructions in the recall notice above. Most recalls require you to stop using the product and contact the manufacturer directly — either by calling the toll-free number listed in the official CPSC notice or by visiting the manufacturer's website. You generally do not need a receipt or original packaging to claim a remedy. The manufacturer is legally required to provide the remedy (Replace) at no cost to you.
No — you should stop using the product entirely, not just unplug it. Electric shock and fire hazards in recalled electrical products often involve internal wiring defects, faulty components, or insulation failures that can cause harm even after the product has been off for a period of time. Do not attempt to repair the product yourself. Keep it unplugged and stored safely until you receive the manufacturer's remedy. If the product has already shown signs of overheating, sparking, or discoloration, handle it carefully and consider contacting your local fire department for guidance on safe disposal.
In most cases, no. CPSC-coordinated recall remedies are designed to be accessible without proof of purchase. Manufacturers typically ask consumers to self-certify ownership and may ask for photos of the product or its serial number. Some manufacturers request that you mail in a portion of the product (such as a cut cord or removed component) as proof of disposal. Check the specific remedy instructions for this recall for exact requirements. If you registered your product at the time of purchase, the process is usually even simpler.
If the original manufacturer has gone out of business, the recall remedy may no longer be available through them. In this case, contact CPSC directly at 1-800-638-2772 or cpsc.gov for guidance. If the brand was acquired by another company, the acquiring company may have assumed recall obligations. In some cases where a remedy is unavailable, CPSC advises consumers to safely dispose of the product. If you were injured by the product of a defunct company, consult a product liability attorney — parent companies, distributors, and retailers may still bear liability in some circumstances.