Skil model 6464 Hammer Drills
CPSC Recall #99-003 - October 5, 1998
Recall Summary
| Recall Number | 99-003 |
| Recall Date | October 5, 1998 |
| Remedy Type | Repair |
| Units Affected | About 150 |
Where It Was Sold
| Home improvement |
| hardware and industrial supply retailers sold these drills from April 1998 to August 1998 for about $139. They were sold in Florida |
| Illinois |
| Iowa |
| Missouri |
| New York and Texas. |
Product
Skil model 6464 Hammer Drills
Description
PRODUCT: Hammer Drill - S-B Power Tool Co., of Chicago, Ill., is recalling about 150 Skil model 6464 hammer drills. These drills are used for precision drilling into hard materials such as concrete and brick, as well as wood and metal. They have a black housing, and a red trigger and selector switch. These drills have a nameplate with "6464" on the side. The date codes 767 through 868 also are stamped on the nameplate, as well as the part number, "F012646400." Home improvement, hardware and industrial supply retailers sold these drills from April 1998 to August 1998 for about $139. They were sold in Florida, Illinois, Iowa, Missouri, New York and Texas. PROBLEM: A wiring problem presents the possibility of an electric shock or electrocution in these drills. INJURIES: There have been no reports of incidents or injuries with these drills. WHAT TO DO: Consumers should immediately stop using these drills. To arrange for a free repair, consumers should call S-B Power Tool at (800) 815-TOOL between 8 a.m and 4:30 p.m CDT Monday through Friday.
Hazard
A wiring problem presents the possibility of an electric shock or electrocution in these drills.
Incidents & Injuries
There have been no reports of incidents or injuries with these drills.
Remedy Instructions
Consumers should immediately stop using these drills. To arrange for a free repair, consumers should call S-B Power Tool at (800) 815-TOOL between 8 a.m and 4:30 p.m CDT Monday through Friday.
What Should You Do?
Stop using this product immediately. Contact the manufacturer for a Repair at no charge. If you experienced an injury, report it at SaferProducts.gov.
Frequently Asked Questions
Follow the consumer action instructions in the recall notice above. Most recalls require you to stop using the product and contact the manufacturer directly, either by calling the toll-free number listed in the official CPSC notice or by visiting the manufacturer's website. You generally do not need a receipt or original packaging to claim a remedy. The manufacturer is legally required to provide the remedy (Repair) at no cost to you.
No, you should stop using the product entirely, not just unplug it. Electric shock and fire hazards in recalled electrical products often involve internal wiring defects, faulty components, or insulation failures that can cause harm even after the product has been off for a period of time. Do not attempt to repair the product yourself. Keep it unplugged and stored safely until you receive the manufacturer's remedy. If the product has already shown signs of overheating, sparking, or discoloration, handle it carefully and consider contacting your local fire department for guidance on safe disposal.
In most cases, no. CPSC-coordinated recall remedies are designed to be accessible without proof of purchase. Manufacturers typically ask consumers to self-certify ownership and may ask for photos of the product or its serial number. Some manufacturers request that you mail in a portion of the product (such as a cut cord or removed component) as proof of disposal. Check the specific remedy instructions for this recall for exact requirements. If you registered your product at the time of purchase, the process is usually even simpler.
If the original manufacturer has gone out of business, the recall remedy may no longer be available through them. In this case, contact CPSC directly at 1-800-638-2772 or cpsc.gov for guidance. If the brand was acquired by another company, the acquiring company may have assumed recall obligations. In some cases where a remedy is unavailable, CPSC advises consumers to safely dispose of the product. If you were injured by the product of a defunct company, consult a product liability attorney, parent companies, distributors, and retailers may still bear liability in some circumstances.