Year 2000 and 2001 Honda XR50R off-road motorcycles
CPSC Recall #01-038 - November 20, 2000
Recall Summary
| Recall Number | 01-038 |
| Recall Date | November 20, 2000 |
| Remedy Type | Inspect, Repair |
| Units Affected | About 22,000 |
Where It Was Sold
| Honda motorcycle dealers nationwide sold these motorcycles from September 1999 through October 2000 for about $1 |
| 300. |
Product
Year 2000 and 2001 Honda XR50R off-road motorcycles
Description
WASHINGTON, D.C. - In cooperation with the U.S. Consumer Product Safety Commission (CPSC), American Honda Motor Co. Inc., of Torrance Calif., is voluntarily recalling about 22,000 off-road motorcycles. The two bolts that attach the handlebars can break. If the handlebars separate from the motorcycle, the rider loses steering control and can crash, posing the risk of serious injuries. Honda has received four reports of handlebars separating from these motorcycles. No injuries have been reported. Honda also received four reports of loose handlebars caused by one of the two bolts failing. The recall includes only years 2000 and 2001 off-road motorcycles with model number XR50R. They are red, and "50R" is written on the sides of the seat on 2000 models, and on the sides of the tank shroud on the 2001 models. The Vehicle Identification Number (VIN) of these motorcycles, listed below, can be found on the left side of the steering head frame tube. -- 2000 XR50R motorcycles have VIN ranges from JH2AE03**YK000013 to JH2AE03**YK0016046 -- 2001 XR50R motorcycles have VIN ranges from JH2AE03**1K010001 to JH2AE03**1K0110056 Honda motorcycle dealers nationwide sold these motorcycles from September 1999 through October 2000 for about $1,300. Consumers should stop using these motorcycles immediately, and call their local Honda motorcycle dealer to schedule a free repair. To locate their local dealer or for more information, consumers should call American Honda at (866) 784-1870 between 8:30 a.m. and 5 p.m. PT Monday through Friday, or go to the company's website at www.honda.com. Registered owners of the vehicles have been notified directly by American Honda about the recall.
Hazard
The two bolts that attach the handlebars can break. If the handlebars separate from the motorcycle, the rider loses steering control and can crash, posing the risk of serious injuries.
Incidents & Injuries
Honda has received four reports of handlebars separating from these motorcycles. No injuries have been reported. Honda also received four reports of loose handlebars caused by one of the two bolts failing.
Remedy Instructions
Consumers should stop using these motorcycles immediately, and call their local Honda motorcycle dealer to schedule a free repair.
What Should You Do?
Stop using this product immediately. Contact the manufacturer for a Inspect, Repair at no charge. If you experienced an injury, report it at SaferProducts.gov.
Frequently Asked Questions
Follow the consumer action instructions in the recall notice above. Most recalls require you to stop using the product and contact the manufacturer directly, either by calling the toll-free number listed in the official CPSC notice or by visiting the manufacturer's website. You generally do not need a receipt or original packaging to claim a remedy. The manufacturer is legally required to provide the remedy (Inspect, Repair) at no cost to you.
Yes. If you were injured by a defective consumer product, whether recalled or not, you may have grounds for a product liability claim against the manufacturer and potentially the retailer. A recall notice can serve as evidence that the manufacturer was aware of the defect. Injuries that may support a claim include burns, lacerations, fractures, electric shock, choking incidents, and chemical exposure. Most product liability attorneys work on a contingency fee basis, meaning you pay nothing unless you win. Consult an attorney promptly, as statutes of limitation vary by state.
In most cases, no. CPSC-coordinated recall remedies are designed to be accessible without proof of purchase. Manufacturers typically ask consumers to self-certify ownership and may ask for photos of the product or its serial number. Some manufacturers request that you mail in a portion of the product (such as a cut cord or removed component) as proof of disposal. Check the specific remedy instructions for this recall for exact requirements. If you registered your product at the time of purchase, the process is usually even simpler.
If the original manufacturer has gone out of business, the recall remedy may no longer be available through them. In this case, contact CPSC directly at 1-800-638-2772 or cpsc.gov for guidance. If the brand was acquired by another company, the acquiring company may have assumed recall obligations. In some cases where a remedy is unavailable, CPSC advises consumers to safely dispose of the product. If you were injured by the product of a defunct company, consult a product liability attorney, parent companies, distributors, and retailers may still bear liability in some circumstances.