Eiger "QuadRunner" ATV by Suzuki
CPSC Recall #04-579 — September 8, 2004
Recall Summary
| Recall Number | 04-579 |
| Recall Date | September 8, 2004 |
| Remedy Type | Inspect, Repair |
| Units Affected | About 240 |
| Manufacturer | Suzuki Motor Corporation of Brea, Calif. |
| Importer | Suzuki Motor Corporation of Brea, Calif. |
| Manufactured In | United States |
Where It Was Sold
| Suzuki dealers nationwide from May 28 through August 16 for $5149 (manual transmission) or $5299 (automatic transmission). |
Product
Eiger "QuadRunner" ATV by Suzuki
Description
In cooperation with the U.S. Consumer Product Safety Commission (CPSC), Suzuki Motor Corporation of Brea, Calif. is voluntarily recalling Eiger "QuadRunner" ATVs by Suzuki. Mislocated welds securing the upper front suspension arm mounting brackets to the frame. The mounting bracket could break off during riding, reducing rider control and resulting in loss of control of the ATV. Loss of control could result in a crash and severe personal injury or death.Name of Product: Eiger "QuadRunner" ATV by SuzukiUnits: About 240Manufacturer/Importer: Suzuki Motor Corporation of Brea, Calif.Hazard: Mislocated welds securing the upper front suspension arm mounting brackets to the frame. The mounting bracket could break off during riding, reducing rider control and resulting in loss of control of the ATV. Loss of control could result in a crash and severe personal injury or death.Incidents/Injuries: No injuries reported.Description: The 2004 model year four-wheel drive Eiger ATVs are affected by this recall. The model numbers are LT-A400FK4 (for automatic transmission) and LT-F400FK4 (for manual transmission). The ATVs with mislocated welds were produced from May 19 through May 25, 2004. The ATVs are red, yellow, or green.Sold at: Suzuki dealers nationwide from May 28 through August 16 for $5149 (manual transmission) or $5299 (automatic transmission).Manufactured In: USARemedy: Free inspection and repair at dealership. Call your Suzuki dealer for an appointment to have your Eiger ATV inspected and, if necessary, repaired.Consumer Contact: Call 800-444-5077 to find the nearest Suzuki dealer.
Hazard
Mislocated welds securing the upper front suspension arm mounting brackets to the frame. The mounting bracket could break off during riding, reducing rider control and resulting in loss of control of the ATV. Loss of control could result in a crash and severe personal injury or death.
Incidents & Injuries
No injuries reported.
Remedy Instructions
Free inspection and repair at dealership. Call your Suzuki dealer for an appointment to have your Eiger ATV inspected and, if necessary, repaired.
What Should You Do?
Stop using this product immediately. Contact the manufacturer for a Inspect, Repair at no charge. If you experienced an injury, report it at SaferProducts.gov.
Frequently Asked Questions
Follow the consumer action instructions in the recall notice above. Most recalls require you to stop using the product and contact the manufacturer directly — either by calling the toll-free number listed in the official CPSC notice or by visiting the manufacturer's website. You generally do not need a receipt or original packaging to claim a remedy. The manufacturer is legally required to provide the remedy (Inspect, Repair) at no cost to you.
Yes. If you were injured by a defective consumer product — whether recalled or not — you may have grounds for a product liability claim against the manufacturer and potentially the retailer. A recall notice can serve as evidence that the manufacturer was aware of the defect. Injuries that may support a claim include burns, lacerations, fractures, electric shock, choking incidents, and chemical exposure. Most product liability attorneys work on a contingency fee basis, meaning you pay nothing unless you win. Consult an attorney promptly, as statutes of limitation vary by state.
In most cases, no. CPSC-coordinated recall remedies are designed to be accessible without proof of purchase. Manufacturers typically ask consumers to self-certify ownership and may ask for photos of the product or its serial number. Some manufacturers request that you mail in a portion of the product (such as a cut cord or removed component) as proof of disposal. Check the specific remedy instructions for this recall for exact requirements. If you registered your product at the time of purchase, the process is usually even simpler.
If the original manufacturer has gone out of business, the recall remedy may no longer be available through them. In this case, contact CPSC directly at 1-800-638-2772 or cpsc.gov for guidance. If the brand was acquired by another company, the acquiring company may have assumed recall obligations. In some cases where a remedy is unavailable, CPSC advises consumers to safely dispose of the product. If you were injured by the product of a defunct company, consult a product liability attorney — parent companies, distributors, and retailers may still bear liability in some circumstances.