Cable Assemblies (used in wall climbing)
CPSC Recall #06-555 — June 8, 2006
Recall Summary
| Recall Number | 06-555 |
| Recall Date | June 8, 2006 |
| Remedy Type | Inspect, Replace |
| Units Affected | About 400 |
| Manufacturer | Extreme Engineering, of Newcastle, Calif. |
| Manufactured In | United States |
Where It Was Sold
| Extreme Engineering's Web site and catalog from January 2006 through March 2006 for about $200 to $400. |
Product
Cable Assemblies (used in wall climbing)
Description
In cooperation with the U.S. Consumer Product Safety Commission (CPSC), Extreme Engineering, of Newcastle, Calif., is voluntarily recalling about 400 Cable Assemblies (used in wall climbing). The cable eye, or round metal tube that holds the cable, could have a fracture, reducing the overall strength of the cable assembly. If the cable assembly were to fail, this would result in a free-fall hazard for the climber.Name of Product: Cable Assemblies (used in wall climbing)Units: About 400Manufacturer: Extreme Engineering, of Newcastle, Calif.Hazard: The cable eye, or round metal tube that holds the cable, could have a fracture, reducing the overall strength of the cable assembly. If the cable assembly were to fail, this would result in a free-fall hazard for the climber.Incidents/Injuries: None reported.Description: These cable assemblies are used by wall climbers in auto-belay and auto-zip devices to prevent a climber from free-falling. The cable assemblies are made up of a stainless steel cable eye, and 1/4-inch galvanized wire rope. The recalled cable assemblies have date codes 1-06, 2-06, or 3-06 etched onto the cable eye.Sold at: Extreme Engineering's Web site and catalog from January 2006 through March 2006 for about $200 to $400.Manufactured In: United StatesRemedy: Consumers should stop using the recalled cable assemblies immediately and contact Extreme Engineering to arrange for inspection details and possible replacement of the cable assembly.Consumer Contact: For more information, call Extreme Engineering collect at (916) 663-1560 between 9 a.m. and 5 p.m. PT, Monday through Friday, visit the firm's Web site at www.extremeengineering.com, or e-mail the firm at [email protected] - Extreme Engineering announced this recall on April 14, 2006.
Hazard
The cable eye, or round metal tube that holds the cable, could have a fracture, reducing the overall strength of the cable assembly. If the cable assembly were to fail, this would result in a free-fall hazard for the climber.
Incidents & Injuries
None reported.
Remedy Instructions
Consumers should stop using the recalled cable assemblies immediately and contact Extreme Engineering to arrange for inspection details and possible replacement of the cable assembly.
What Should You Do?
Stop using this product immediately. Contact the manufacturer for a Inspect, Replace at no charge. If you experienced an injury, report it at SaferProducts.gov.
Frequently Asked Questions
Follow the consumer action instructions in the recall notice above. Most recalls require you to stop using the product and contact the manufacturer directly — either by calling the toll-free number listed in the official CPSC notice or by visiting the manufacturer's website. You generally do not need a receipt or original packaging to claim a remedy. The manufacturer is legally required to provide the remedy (Inspect, Replace) at no cost to you.
Furniture tip-overs are a leading cause of pediatric injuries in the U.S., particularly dressers, bookcases, and television stands. CPSC data shows that a child dies approximately every two weeks from a furniture or TV tip-over. Unstable high chairs, baby swings, and bouncers are also frequent recall subjects due to fall risks. ASTM International standards now require that certain furniture must meet tip-over resistance standards, and CPSC has been actively pursuing mandatory requirements for dressers and chests. If you have furniture that was not recalled but feels unstable, wall-anchoring kits are widely available at hardware stores.
In most cases, no. CPSC-coordinated recall remedies are designed to be accessible without proof of purchase. Manufacturers typically ask consumers to self-certify ownership and may ask for photos of the product or its serial number. Some manufacturers request that you mail in a portion of the product (such as a cut cord or removed component) as proof of disposal. Check the specific remedy instructions for this recall for exact requirements. If you registered your product at the time of purchase, the process is usually even simpler.
If the original manufacturer has gone out of business, the recall remedy may no longer be available through them. In this case, contact CPSC directly at 1-800-638-2772 or cpsc.gov for guidance. If the brand was acquired by another company, the acquiring company may have assumed recall obligations. In some cases where a remedy is unavailable, CPSC advises consumers to safely dispose of the product. If you were injured by the product of a defunct company, consult a product liability attorney — parent companies, distributors, and retailers may still bear liability in some circumstances.