Whitco Company LP poles 70 feet tall or higher
CPSC Recall #10-295 — July 5, 2010
Recall Summary
| Recall Number | 10-295 |
| Recall Date | July 5, 2010 |
| Remedy Type | Inspect, Replace, Repair |
| Units Affected | More than 2,500 |
| Manufacturer | Whitco Company LP, of Fort Worth, Texas (which is out of business) |
| Manufactured In | United States and Mexico |
Where It Was Sold
| Lighting contractors nationwide from 2000 through 2005. |
Product
Whitco Company LP poles 70 feet tall or higher
Description
This recall to inspect and repair involves Whitco Co. LP outdoor steel stadium light poles from about 70 to 135 feet and weigh from about 1 to 4 tons. The poles are constructed of steel with a galvanized coating and were manufactured between 2000-2005. The poles can be found at facilities such as recreational parks and fields, schools and outdoor stadiums. Attached is a listing (pdf) of locations that may have the affected poles.Note: This release does not affect Whitco Pole products.
Hazard
The poles can fracture or crack and fall over, posing a risk of serious injury or death to patrons and bystanders from being hit or crushed. The poles range from 1 to 4 tons increasing the risk of death if the pole falls toward a crowded stadium or onto a building.
Incidents & Injuries
As of June 2010, CPSC has confirmed eleven incidents in which Whitco Co. LP poles fell. In one incident, a pole fell through the roof of a school gymnasium causing significant property damage. In two other incidents, the poles fell onto outdoor bleachers causing significant property damage. The latest incident occurred at Integrity Park Inc. in Argyle, Texas. The majority of incidents occurred in Texas with others in several other states where Whitco Co. LP poles have been installed. To date, CPSC is not aware of any injuries. However, some incidents have been close calls, with people exiting the area just minutes before a pole fell. CPSC has also identified more than 50 Whitco Co. LP poles that have not yet fallen, but inspections revealed fractures and/or cracks next to the weld that joins the pole to its base plate. The fallen and cracked poles were located near or around school football stadiums and gymnasiums.
Remedy Instructions
To reduce the risk of injury, Whitco Co. LP light poles should be inspected by an engineer or a Level II non-destructive testing technician immediately to identify cracking at or near the weld connecting the pole to the base plate flange. A visual examination with the naked eye or with a magnifier will not determine the extent of any cracking. Non-destructive techniques such as magnetic particle inspection, dye penetrant, or ultrasonic inspection techniques are recommended. If any cracking or fracturing is found, immediately have the affected poles repaired or replaced by a qualified professional. A design analysis to assess the stresses placed on the pole is also recommended. CPSC recommends that all outdoor steel stadium light poles be routinely inspected by a professional. As the manufacturer has become bankrupt, individual owners of the poles must arrange for inspection.
What Should You Do?
Stop using this product immediately. Contact the manufacturer for a Inspect, Replace, Repair at no charge. If you experienced an injury, report it at SaferProducts.gov.
Frequently Asked Questions
Follow the consumer action instructions in the recall notice above. Most recalls require you to stop using the product and contact the manufacturer directly — either by calling the toll-free number listed in the official CPSC notice or by visiting the manufacturer's website. You generally do not need a receipt or original packaging to claim a remedy. The manufacturer is legally required to provide the remedy (Inspect, Replace, Repair) at no cost to you.
Furniture tip-overs are a leading cause of pediatric injuries in the U.S., particularly dressers, bookcases, and television stands. CPSC data shows that a child dies approximately every two weeks from a furniture or TV tip-over. Unstable high chairs, baby swings, and bouncers are also frequent recall subjects due to fall risks. ASTM International standards now require that certain furniture must meet tip-over resistance standards, and CPSC has been actively pursuing mandatory requirements for dressers and chests. If you have furniture that was not recalled but feels unstable, wall-anchoring kits are widely available at hardware stores.
In most cases, no. CPSC-coordinated recall remedies are designed to be accessible without proof of purchase. Manufacturers typically ask consumers to self-certify ownership and may ask for photos of the product or its serial number. Some manufacturers request that you mail in a portion of the product (such as a cut cord or removed component) as proof of disposal. Check the specific remedy instructions for this recall for exact requirements. If you registered your product at the time of purchase, the process is usually even simpler.
If the original manufacturer has gone out of business, the recall remedy may no longer be available through them. In this case, contact CPSC directly at 1-800-638-2772 or cpsc.gov for guidance. If the brand was acquired by another company, the acquiring company may have assumed recall obligations. In some cases where a remedy is unavailable, CPSC advises consumers to safely dispose of the product. If you were injured by the product of a defunct company, consult a product liability attorney — parent companies, distributors, and retailers may still bear liability in some circumstances.