Black & Decker Random Orbit Sanders
CPSC Recall #10-339 — September 8, 2010
Recall Summary
| Recall Number | 10-339 |
| Recall Date | September 8, 2010 |
| Remedy Type | Replace |
| Units Affected | About 192,000 |
| Manufacturer | Black & Decker (U.S.) Inc., of Towson, Md. |
| Manufactured In | China |
Where It Was Sold
| Home center |
| hardware and discount stores and by authorized Black & Decker dealers nationwide from January 2007 through July 2009 for about $40. |
Product
Black & Decker Random Orbit Sanders
Description
WASHINGTON, D.C. - The U.S. Consumer Product Safety Commission, in cooperation with the firm named below, today announced a voluntary recall of the following consumer product. Consumers should stop using recalled products immediately unless otherwise instructed. It is illegal to resell or attempt to resell a recalled consumer product.Name of Product: Black & Decker Random Orbit SandersUnits: About 192,000Manufacturer: Black & Decker (U.S.) Inc., of Towson, Md.Hazard: The black plastic disc (called the platen) that holds the sandpaper can fly off or break apart during use and the disc, or pieces of the disc, can hit the user or those nearby, posing a laceration hazard.Incidents/Injuries: Black & Decker has received 73 reports of incidents involving the sander's black plastic disc (platen) breaking or falling apart, including 15 reports of injuries from flying pieces, one of which involved a serious facial laceration.Description: This recall involves Black & Decker random orbit sanders with model numbers RO400, RO400G, RO410, RO410K, RO410LW and FS3000ROS and date codes between 200701 and 200929. The sanders are orange and black. "Black & Decker" is printed on the sanders. The model number is printed on a label on the sander. The date code is stamped on the underside of the sander where the dust bag is inserted.Sold at: Home center, hardware and discount stores and by authorized Black & Decker dealers nationwide from January 2007 through July 2009 for about $40.Manufactured in: ChinaRemedy: Consumers should immediately stop using the recalled sanders and contact Black & Decker for a free replacement platen to hold the sandpaper.Consumer Contact: For additional information, contact Black & Decker toll-free at (866) 220-1767 between 8 a.m. and 5 p.m. ET Monday through Friday or visit the firm's website at www.blackanddecker.com.
Hazard
The black plastic disc (called the platen) that holds the sandpaper can fly off or break apart during use and the disc, or pieces of the disc, can hit the user or those nearby, posing a laceration hazard.
Incidents & Injuries
Black & Decker has received 73 reports of incidents involving the sander's black plastic disc (platen) breaking or falling apart, including 15 reports of injuries from flying pieces, one of which involved a serious facial laceration.
Remedy Instructions
Consumers should immediately stop using the recalled sanders and contact Black & Decker for a free replacement platen to hold the sandpaper.
What Should You Do?
Stop using this product immediately. Contact the manufacturer for a Replace at no charge. If you experienced an injury, report it at SaferProducts.gov.
Frequently Asked Questions
Follow the consumer action instructions in the recall notice above. Most recalls require you to stop using the product and contact the manufacturer directly — either by calling the toll-free number listed in the official CPSC notice or by visiting the manufacturer's website. You generally do not need a receipt or original packaging to claim a remedy. The manufacturer is legally required to provide the remedy (Replace) at no cost to you.
Yes. If you were injured by a defective consumer product — whether recalled or not — you may have grounds for a product liability claim against the manufacturer and potentially the retailer. A recall notice can serve as evidence that the manufacturer was aware of the defect. Injuries that may support a claim include burns, lacerations, fractures, electric shock, choking incidents, and chemical exposure. Most product liability attorneys work on a contingency fee basis, meaning you pay nothing unless you win. Consult an attorney promptly, as statutes of limitation vary by state.
In most cases, no. CPSC-coordinated recall remedies are designed to be accessible without proof of purchase. Manufacturers typically ask consumers to self-certify ownership and may ask for photos of the product or its serial number. Some manufacturers request that you mail in a portion of the product (such as a cut cord or removed component) as proof of disposal. Check the specific remedy instructions for this recall for exact requirements. If you registered your product at the time of purchase, the process is usually even simpler.
If the original manufacturer has gone out of business, the recall remedy may no longer be available through them. In this case, contact CPSC directly at 1-800-638-2772 or cpsc.gov for guidance. If the brand was acquired by another company, the acquiring company may have assumed recall obligations. In some cases where a remedy is unavailable, CPSC advises consumers to safely dispose of the product. If you were injured by the product of a defunct company, consult a product liability attorney — parent companies, distributors, and retailers may still bear liability in some circumstances.