ECX Circuit, Ruckus, and Torment remote-controlled model vehicles
CPSC Recall #17-139 — April 25, 2017
Recall Summary
| Recall Number | 17-139 |
| Recall Date | April 25, 2017 |
| Remedy Type | Replace |
| Units Affected | About 18,600 (In addition, 540 were sold in Canada) |
| Importer | Horizon Hobby LLC, of Champaign, Ill. |
| Manufactured In | China |
Where It Was Sold
| Horizon Hobby stores nationwide and online at www.horizonhobby.com from October 2016 through December 2016 for about $180. |
Product
ECX Circuit, Ruckus, and Torment remote-controlled model vehicles
Description
The recall involves the Dynamite 40-Amp FWD REV Brushed ESC – DYNS2201. It is the Electronic Speed Control (ESC) that comes in the remote controlled hobby model vehicles ECX 1/10 LiPo Circuit, Ruckus and Torment models with the following models numbers: ECX03130T1, ECX03130T2, ECX03131T1, ECX03131T2, ECX03133T1, ECX03133T2, ECX03154. The model numbers can be found on the product box or in the owner’s manual for each vehicle. The model vehicles measure about 18 inches in length and 12 inches in width and are hobby grade remote control models for ages 14 and up.
Hazard
The vehicle’s electronic speed control (ESC) can fail and short circuit, posing a fire hazard.
Incidents & Injuries
Horizon Hobby has received 19 reports of the ESC in the model truck and cars catching fire. No injuries or property damage has been reported.
Remedy Instructions
Consumers should immediately stop using the recalled product and contact Horizon Hobby for instructions on receiving a free replacement ESC.
What Should You Do?
Stop using this product immediately. Contact the manufacturer for a Replace at no charge. If you experienced an injury, report it at SaferProducts.gov.
Frequently Asked Questions
Follow the consumer action instructions in the recall notice above. Most recalls require you to stop using the product and contact the manufacturer directly — either by calling the toll-free number listed in the official CPSC notice or by visiting the manufacturer's website. You generally do not need a receipt or original packaging to claim a remedy. The manufacturer is legally required to provide the remedy (Replace) at no cost to you.
If the product caused a fire or burn injury, document the incident with photos and preserve the product if it is safe to do so. Report the incident to the CPSC at SaferProducts.gov and to your local fire department. Contact the manufacturer to inform them of the incident — they are required to track and report injuries to CPSC. You may also want to consult a personal injury attorney, as fire and burn injuries caused by defective products can be grounds for a product liability claim against the manufacturer.
In most cases, no. CPSC-coordinated recall remedies are designed to be accessible without proof of purchase. Manufacturers typically ask consumers to self-certify ownership and may ask for photos of the product or its serial number. Some manufacturers request that you mail in a portion of the product (such as a cut cord or removed component) as proof of disposal. Check the specific remedy instructions for this recall for exact requirements. If you registered your product at the time of purchase, the process is usually even simpler.
If the original manufacturer has gone out of business, the recall remedy may no longer be available through them. In this case, contact CPSC directly at 1-800-638-2772 or cpsc.gov for guidance. If the brand was acquired by another company, the acquiring company may have assumed recall obligations. In some cases where a remedy is unavailable, CPSC advises consumers to safely dispose of the product. If you were injured by the product of a defunct company, consult a product liability attorney — parent companies, distributors, and retailers may still bear liability in some circumstances.