RIDGID® NXT HD06000 and HD09000 wet/dry vacuums
CPSC Recall #18-220 — September 11, 2018
Recall Summary
| Recall Number | 18-220 |
| Recall Date | September 11, 2018 |
| Remedy Type | Replace |
| Units Affected | About 208,000 (in addition, about 2,600 were sold in Canada) |
| Importer | Emerson Tool Company, of St. Louis, Mo. |
| Manufactured In | Mexico |
Where It Was Sold
| The Home Depot stores nationwide and online at www.homedepot.com from March 2018 through July 2018 for about $50 for the 6-gallon wet/dry vacuum and for about $60 for the 9-gallon wet/dry vacuum. |
Product
RIDGID® NXT HD06000 and HD09000 wet/dry vacuums
Description
This recall involves RIDGID NXT wet/dry vacuums, models HD06000 (6-gallon) and HD09000 (9-gallon). The orange and black wet/dry vacuum has four swivel casters, a carrying handle, a hose and accessories. RIDGID is printed on the front of the vacuum. The model number can be found on a silver product identification label on the back of the vacuum’s powerhead assembly.
Hazard
The on/off switch can become dislodged and expose energized wiring, posing a shock hazard to consumers.
Incidents & Injuries
None reported
Remedy Instructions
Consumers should immediately stop using the recalled wet/dry vacuum and contact Emerson Tool Company for a free replacement wet/dry vacuum powerhead assembly.
What Should You Do?
Stop using this product immediately. Contact the manufacturer for a Replace at no charge. If you experienced an injury, report it at SaferProducts.gov.
Frequently Asked Questions
Follow the consumer action instructions in the recall notice above. Most recalls require you to stop using the product and contact the manufacturer directly — either by calling the toll-free number listed in the official CPSC notice or by visiting the manufacturer's website. You generally do not need a receipt or original packaging to claim a remedy. The manufacturer is legally required to provide the remedy (Replace) at no cost to you.
No — you should stop using the product entirely, not just unplug it. Electric shock and fire hazards in recalled electrical products often involve internal wiring defects, faulty components, or insulation failures that can cause harm even after the product has been off for a period of time. Do not attempt to repair the product yourself. Keep it unplugged and stored safely until you receive the manufacturer's remedy. If the product has already shown signs of overheating, sparking, or discoloration, handle it carefully and consider contacting your local fire department for guidance on safe disposal.
In most cases, no. CPSC-coordinated recall remedies are designed to be accessible without proof of purchase. Manufacturers typically ask consumers to self-certify ownership and may ask for photos of the product or its serial number. Some manufacturers request that you mail in a portion of the product (such as a cut cord or removed component) as proof of disposal. Check the specific remedy instructions for this recall for exact requirements. If you registered your product at the time of purchase, the process is usually even simpler.
If the original manufacturer has gone out of business, the recall remedy may no longer be available through them. In this case, contact CPSC directly at 1-800-638-2772 or cpsc.gov for guidance. If the brand was acquired by another company, the acquiring company may have assumed recall obligations. In some cases where a remedy is unavailable, CPSC advises consumers to safely dispose of the product. If you were injured by the product of a defunct company, consult a product liability attorney — parent companies, distributors, and retailers may still bear liability in some circumstances.