Edwards Mechanical Heat Detectors
CPSC Recall #20-140 — June 17, 2020
Recall Summary
| Recall Number | 20-140 |
| Recall Date | June 17, 2020 |
| Remedy Type | Replace |
| Units Affected | About 85,000 |
| Importer | Edwards Fire Safety, of Bradenton, Florida |
| Manufactured In | China |
Where It Was Sold
| Edwards’ distributors |
| electrical wholesalers |
| contractors |
| and fire safety professionals nationwide from January 1979 through May 2018 for between $6 to $7 per unit. |
Product
Edwards Mechanical Heat Detectors
Description
This recall involves mechanical heat detectors used indoors to detect elevated temperatures as part of professionally installed fire detection systems for residential homes and businesses. In residential settings, this product is installed in kitchens, attics and garages for property protection. The recalled heat detectors do not detect smoke or make an audible sound, but rather act as sensors that trigger fire alarms or security panels when elevated heat is detected. The heat detectors can be mounted to walls or ceilings and are labeled with “135F” and “NOT A LIFE SAFETY DEVICE.” The recalled units are the following: Model # Description Seller 281B-PL Heat Detector, 135F, Rate of Rise and Fixed Temperature Edwards 283B-PL Heat Detector, 135F, Fixed Temperature Edwards 104-13 Heat Detector, 135F, Rate of Rise and Fixed temperature Interlogix 104-15 Heat Detector, 135F, Fixed Temperature Interlogix 1EYC2 Heat Detector, 135F, Rate of Rise and Fixed Temperature Edwards, Grainger P/N 1EYC4 Heat Detector, 135F, Fixed Temperature Edwards, Grainger P/N 281B-20pkg-OEM-UTCO1 Heat Detector, 135F, Rate of Rise and Fixed Temperature Honeywell Security 281B-20pkg-OEM-UTC20 Heat Detector, 135F, Rate of Rise and Fixed Temperature Interlogix 281B-OEM-UTC01 Heat Detector, 135F, Rate of Rise and Fixed Temperature Honeywell Security 283B-20pkg-OEM-UTC01 Heat Detector, 135F, Fixed Temperature Honeywell Security 73340U Heat Detector, 135F, Fixed Temperature and Rate of Rise Mirtone 73342U Heat Detector, 135F, Fixed Temperature Mirtone AI281B Heat Detector, 135F, Fixed Temperature and Rate of Rise Edwards AI283B Heat Detector, 135F, Fixed Temperature Edwards 281A Heat Detector, 135F, Fixed Temperature and Rate of Rise Edwards
Hazard
The recalled heat detectors can fail to activate in reaction to rising temperatures, posing a risk of failure to alert consumers to a fire.
Incidents & Injuries
None reported
Remedy Instructions
Consumers who use the product in life-safety applications permitted by code (for example, in elevator shafts, or in lieu of smoke detectors, manual pull stations, or sprinklers in particular settings), or in residential attics or residential garages, should immediately contact a fire or security alarm professional for free replacement and installation of the heat detector.
What Should You Do?
Stop using this product immediately. Contact the manufacturer for a Replace at no charge. If you experienced an injury, report it at SaferProducts.gov.
Frequently Asked Questions
Follow the consumer action instructions in the recall notice above. Most recalls require you to stop using the product and contact the manufacturer directly — either by calling the toll-free number listed in the official CPSC notice or by visiting the manufacturer's website. You generally do not need a receipt or original packaging to claim a remedy. The manufacturer is legally required to provide the remedy (Replace) at no cost to you.
If the product caused a fire or burn injury, document the incident with photos and preserve the product if it is safe to do so. Report the incident to the CPSC at SaferProducts.gov and to your local fire department. Contact the manufacturer to inform them of the incident — they are required to track and report injuries to CPSC. You may also want to consult a personal injury attorney, as fire and burn injuries caused by defective products can be grounds for a product liability claim against the manufacturer.
In most cases, no. CPSC-coordinated recall remedies are designed to be accessible without proof of purchase. Manufacturers typically ask consumers to self-certify ownership and may ask for photos of the product or its serial number. Some manufacturers request that you mail in a portion of the product (such as a cut cord or removed component) as proof of disposal. Check the specific remedy instructions for this recall for exact requirements. If you registered your product at the time of purchase, the process is usually even simpler.
If the original manufacturer has gone out of business, the recall remedy may no longer be available through them. In this case, contact CPSC directly at 1-800-638-2772 or cpsc.gov for guidance. If the brand was acquired by another company, the acquiring company may have assumed recall obligations. In some cases where a remedy is unavailable, CPSC advises consumers to safely dispose of the product. If you were injured by the product of a defunct company, consult a product liability attorney — parent companies, distributors, and retailers may still bear liability in some circumstances.