2005 HINO ND8J
10 recalls, 0 complaints - 87 TSBs
14V791000 Dec 15, 2014
PARKING BRAKE
Defect Description
Hino Motor Sales U.S.A., Inc. (Hino) is recalling certain model year 2005-2015 Hino ND8J, NE8J, and NF8J trucks manufactured August 26, 2003, to May 14, 2014. In the affected vehicles, components of the parking brake handle assembly may wear, resulting in either the parking brake unexpectedly rele... Read more
Consequence
Either parking brake condition may result in the vehicle rolling unexpectedly, increasing the risk of a crash.
Remedy
Hino will notify owners, and dealers will install a new parking brake lever that contains a two-way damper and a roller at the cable joining pin, free of charge. The recall began February 2, 2015. Owners may contact Hino customer service at 1-248-699-9330. Hino's number for this recall is A9970. ... Read more
12V555000 Dec 3, 2012
ELECTRICAL SYSTEM:12V/24V/48V BATTERY:CABLES
Defect Description
Hino is recalling certain model year 2005 through 2013 medium duty trucks, models NA6J, NB6J, NC6J, ND8J, NE8J, NJ8J, NF8J, and NV8J, manufactured from August 18, 2003, through November 16, 2011. Over time, the main B+ circuit from the battery to the starter could potentially short to ground due to... Read more
Consequence
If the B+ circuit shorts to ground, it may lead to a fire.
Remedy
Hino will notify owners, and dealers will repair the vehicles free of charge. The recall began on January 17, 2013. Owners may contact Hino at 1-248-699-9390.
08V195000 Apr 30, 2008
SUSPENSION:FRONT
Defect Description
HINO IS RECALLING 16,805 MY 2005-2008 NA6J, NB6J, NC6J, ND8J, NE8J, NJ8J, AND NV8J TRUCKS. THE TWO VERTICAL RIGHT/LEFT SIDE FRONT SPRING BRACKET BOLTS WERE NOT TIGHTENED PROPERLY DURING THE ASSEMBLY PROCESS. THIS MAY CAUSE INCREASED STRESS ON THE SPRING BRACKET WHICH CAN LEAD TO CRACKING OF THE BR... Read more
Consequence
THIS COULD REDUCE STEERING CONTROL INCREASING THE RISK OF A CRASH.
Remedy
DEALERS WILL REPLACE THE VERTICAL FRONT SPRING BRACKET ATTACHMENT BOLTS ON RIGHT/LEFT HANGER BRACKETS AND RE-TORQUE ALL ASSOCIATED BOLTS FREE OF CHARGE. THE RECALL BEGAN ON SEPTEMBER 8, 2008. OWNERS MAY CONTACT HINO AT 248-699-9300.
07V208000 May 9, 2007
ENGINE AND ENGINE COOLING
Defect Description
ON CERTAIN TRUCKS EQUIPPED WITH BANDO BELT TENSIONER, CORROSION OR RUST MAY DEVELOP ON THE TENSIONER SPINDLE OR BUSHING CAUSING THE AUTO TENSIONER TO BECOME STIFF OR BIND. THIS CAN CAUSE THE DRIVE BELT TO SUDDENLY COME OFF OR THE AUTO TENSIONER MOUNTING BOLTS COULD SUDDENLY BREAK.
Consequence
IF THE DRIVE BELT COMES OFF, THE ALTERNATOR WARNING LAMP WILL ILLUMINATE. IF THE WARNING IS IGNORED, THIS CONDITION COULD ULTIMATELY RESULT IN A LOSS OF VEHICLE POWER (ENGINE STALL) INCREASING THE RISK OF A CRASH.
Remedy
DEALERS WILL REPLACE THE AUTO TENSIONER, INSTALL UPGRADED MOUNTING BOLTS, AND REPLACE THE ACCESSORY DRIVE BELT FREE OF CHARGE. THE RECALL BEGAN ON APRIL 25, 2007. OWNERS MAY CONTACT HINO MOTORS AT 248-648-6430. NOTE: THIS RECALL SUPERSEDES A PREVIOUS CAMPAIGN (PLEASE SEE 06V157).
06V157000 May 10, 2006
ENGINE AND ENGINE COOLING
Defect Description
ON CERTAIN TRUCKS EQUIPPED WITH BANDO BELT TENSIONER, CORROSION OR RUST MAY DEVELOP ON THE TENSIONER SPINDLE OR BUSHING CAUSING THE AUTO TENSIONER TO BECOME STIFF OR BIND. THIS CAN CAUSE THE DRIVE BELT TO SUDDENLY COME OFF OR THE AUTO TENSIONER MOUNTING BOLTS COULD SUDDENLY BREAK.
Consequence
IF THE DRIVE BELT COMES OFF, THE ALTERNATOR WARNING LAMP WILL ILLUMINATE. IF THE WARNING IS IGNORED, THIS CONDITION COULD ULTIMATELY RESULT IN A LOSS OF VEHICLE POWER (ENGINE STALL) INCREASING THE RISK OF A CRASH.
Remedy
DEALERS WILL REPLACE THE AUTO TENSIONER, INSTALL UPGRADED MOUNTING BOLTS, AND REPLACE THE ACCESSORY DRIVE BELT FREE OF CHARGE. THE RECALL BEGAN ON MAY 2, 2006. OWNERS MAY CONTACT HINO MOTORS AT 248-648-6430. THIS CAMPAIGN HAS BEEN SUPERSEDED - PLEASE SEE 07V208.
04V448000 Sep 20, 2004
STEERING
Defect Description
ON CERTAIN TRUCKS, WHEN THE STEERING WHEEL IS BEING TURNED, THE DUST COVER MAY TWINE WITH THE STEERING SHAFT AND COULD RESULT IN THE STEERING WHEEL OPERATION BECOMING HEAVY.
Consequence
LOSS OF STEERING CONTROL MAY OCCUR, WHICH COULD RESULT IN A CRASH.
Remedy
DEALERS WILL REMOVE THE OLD DUST COVER AND INSTALL A NEWLY DESIGNED COVER. THE RECALL BEGAN OCTOBER 8, 2004. OWNERS SHOULD CONTACT HINO AT 1-845-365-1400.
04V439000 Sep 13, 2004
VEHICLE SPEED CONTROL:ACCELERATOR PEDAL
Defect Description
ON CERTAIN CAB AND CHASSIS TRUCKS, WHEN EXCESSIVE FORCE IS APPLIED TO THE ACCELERATOR PEDAL, BEYOND THAT REQUIRED TO ACHIEVE FULL ACCELERATION, THE PEDAL MAY BECOME WEDGED BETWEEN THE FLOOR PANEL AND THE CARPET.
Consequence
WHEN THIS OCCURS, THE ACCELERATOR PEDAL WILL BECOME WEDGED IN THE FULL THROTTLE POSITION WHICH COULD RESULT IN A CRASH WITHOUT WARNING.
Remedy
DEALERS WILL INSPECT THE ACCELERATOR PEDAL HEIGHT TO DETERMINE IF IT IS WITHIN SPECIFICATIONS. IF EITHER THE PEDAL HEIGHT OR THE ACCELERATOR ROD IS NOT WITHIN SPECIFICATIONS, REPLACE THE ACCELERATOR ASSEMBLY. IN ADDITION, A NEW BRACKET CONTAINING AN ACCELERATOR PEDAL STOPPER WILL BE INSTALLED. THE... Read more
04V374000 Aug 2, 2004
STEERING:HYDRAULIC POWER ASSIST:HOSE, PIPING, AND CONNECTIONS
Defect Description
ON CERTAIN TRUCKS, THE POWER STEERING PIPE CLAMP WAS NOT INSTALLED.
Consequence
THE PIPE COULD FRACTURE CAUSING THE LOSS OF POWER STEERING, WHICH COULD RESULT IN A CRASH.
Remedy
DEALERS WILL INSPECT EACH VEHICLE AND DETERMINE IF THE POWER STEERING CLIP IS INSTALLED. IF THE POWER STEERING PIPE CLIP IS NOT INSTALLED, THE CORRECT CLIP WILL BE ADDED. THE RECALL BEGAN ON AUGUST 23, 2004. OWNERS SHOULD CONTACT HINO AT 1-845-365-1400.
04V202000 Apr 28, 2004
STEERING:LINKAGES
Defect Description
ON CERTAIN TRUCKS, THE PINCH BOLT NUT OF THE YOKE CONNECTING THE STEERING GEARBOX AND THE STEERING WHEEL SHAFT BACKED OUT.
Consequence
THIS COULD CAUSE THE YOKE AND THE STEERING WHEEL SHAFT TO SEPARATE WHICH COULD RESULT IN LOSS OF STEERING INCREASING THE RISK OF A CRASH.
Remedy
DEALERS WILL INSPECT AND RETORQUE THE PINCH BOLT NUT AS NECESSARY. OWNER NOTIFICATION BEGAN MAY 7, 2004. OWNERS WHO TAKE THEIR VEHICLES TO AN AUTHORIZED DEALER ON AN AGREED UPON SERVICE DATE AND DO NOT RECEIVE THE FREE REMEDY WITHIN A REASONABLE TIME SHOULD CONTACT HINO AT 1-845-365-1400.
04V098000 Feb 25, 2004
EXTERIOR LIGHTING:BACK UP LIGHTS
Defect Description
CERTAIN TRUCKS EQUIPPED WITH MANUAL TRANSMISSIONS FAIL TO COMPLY WITH THE REQUIREMENTS OF FEDERAL MOTOR VEHICLE SAFETY STANDARD NO. 108, "LAMPS, REFLECTIVE DEVICES, AND ASSOCIATED EQUIPMENT." A REVERSE BACKUP SWITCH MAY HAVE BEEN CONTAMINATED DURING THE MANUFACTURING PROCESS. THE NEUTRAL SAFETY SW... Read more
Consequence
THIS DOES NOT MEET THE REQUIREMENTS OF THE STANDARD. ALSO, THIS COULD CAUSE THE CRUISE CONTROL NOT TO BE ACTIVATED. THE REVERSE BACKUP LIGHT AND BUZZER STAYS ON.
Remedy
DEALERS WILL REPLACE THE SWITCHES. OWNER NOTIFICATION BEGAN ON APRIL 19, 2004. OWNERS WHO TAKE THEIR VEHICLES TO AN AUTHORIZED DEALER ON AN AGREED UPON SERVICE DATE AND DO NOT RECEIVE THE FREE REMEDY WITHIN A REASONABLE TIME SHOULD CONTACT HINO AT 1-845-365-1400.
No complaints found for this vehicle.
Technical Service Bulletins, 2005 HINO ND8J
87 manufacturer communications from 59 unique bulletins. TSBs describe known problems and recommended fixes from the manufacturer.
Most Affected Components
| Component | Bulletins |
|---|---|
| 355200 EQUIPMENT:OTHER:OWNERS/SERVICE/OTHER MANUAL | 11 |
| 350000 EQUIPMENT | 8 |
| 356000 EQUIPMENT ADAPTIVE/MOBILITY | 7 |
| 060000 ENGINE (PWS) | 6 |
| 061320 ENGINE AND ENGINE COOLING:ENGINE:OTHER FUEL TYPES:TURBO/SUPERCHARGER | 5 |
| 200000 WHEELS | 5 |
| 103700 POWER TRAIN:AUTOMATIC TRANSMISSION:TORQUE CONVERTER | 4 |
| 060000 ENGINE AND ENGINE COOLING | 4 |
167-B0502-12
Sep 28, 2016
350000 EQUIPMENT
SB - 05 - 004 SPEEDOMETER RECALIBRATION. This document is to inform of the procedure to calibrate the Pulse Adjust Module whenneeded (ex. tire size change, rear carrier ratio change).
167-B0502-12
Sep 28, 2016
190000 TIRES
SB - 05 - 004 SPEEDOMETER RECALIBRATION. This document is to inform of the procedure to calibrate the Pulse Adjust Module whenneeded (ex. tire size change, rear carrier ratio change).
167-B0502-12
Sep 28, 2016
110000 ELECTRICAL SYSTEM
SB - 05 - 004 SPEEDOMETER RECALIBRATION. This document is to inform of the procedure to calibrate the Pulse Adjust Module whenneeded (ex. tire size change, rear carrier ratio change).
167-P1602-12
Mar 22, 2016
072100 FUEL SYSTEM, GASOLINE:DELIVERY:FUEL PUMP
13-008 Injection Pump Drive Case. Please note the following part number changes to the Injection Pump Bearing Case. Not replacing the correct replacement parts WILL result in major engine damage. The Hino Ordering system has been modified
167-P1602-12
Mar 22, 2016
060000 ENGINE (PWS)
13-008 Injection Pump Drive Case. Please note the following part number changes to the Injection Pump Bearing Case. Not replacing the correct replacement parts WILL result in major engine damage. The Hino Ordering system has been modified
167-T1514-12
Jun 22, 2015
162000 STRUCTURE:BODY
TT-15-016 The purpose of this publication is to communicate the standard measuring positions on the Hino chassis. In some cases, the customer may report a visual chassis posture concern where the chassis appears to be leaning more towards t
167-B1523-12
Jun 2, 2015
060000 ENGINE AND ENGINE COOLING
SB-15-026 A subject vehicle may exhibit an engine oil leak or engine coolant leaking externally from the engine head gasket sealing area on the exhaust manifold side of the engine. An improved head gasket has been made available as a servic
167-B1312-12
Apr 13, 2015
355200 EQUIPMENT:OTHER:OWNERS/SERVICE/OTHER MANUAL
SB-13-009 This bulletin is to inform dealers and workshops of proper paint codes for all Hino models. ALL MODELS
167-B1509-12
Jan 22, 2015
113000 ELECTRICAL SYSTEM:STARTER ASSEMBLY
SB-15-009 This bulletin provides the corrective action for a fluid overflow condition from the main housing breather at startup in cold ambient temperatures at or below +5F (-15C).
SB-14-019
Sep 16, 2014
110000 ELECTRICAL SYSTEM
In the event that one of the subject vehicles is driven while the ABS warning lamp is illuminated, operation of the torque converter clutch will be suspended. Driving the vehicle with an ABS warning lamp illuminated can lead to overheating
167-B1406-12
Sep 16, 2014
103700 POWER TRAIN:AUTOMATIC TRANSMISSION:TORQUE CONVERTER
SB-14-019 In the event that one of the subject vehicles is driven while the ABS warning lamp is illuminated, operation of the torque converter clutch will be suspended. Driving the vehicle with an ABS warning lamp illuminated can lead to ov
167-B1406-12
Sep 16, 2014
103700 POWER TRAIN:AUTOMATIC TRANSMISSION:TORQUE CONVERTER
SB-14-019 In the event that one of the subject vehicles is driven while the ABS warning lamp is illuminated, operation of the torque converter clutch will be suspended. Driving the vehicle with an ABS warning lamp illuminated can lead to ov
SB-14-019
Sep 16, 2014
100000 POWER TRAIN
In the event that one of the subject vehicles is driven while the ABS warning lamp is illuminated, operation of the torque converter clutch will be suspended. Driving the vehicle with an ABS warning lamp illuminated can lead to overheating
SB-14-019
Sep 16, 2014
046600 SERVICE BRAKES, AIR:ANTILOCK:ABS WARNING LIGHT
In the event that one of the subject vehicles is driven while the ABS warning lamp is illuminated, operation of the torque converter clutch will be suspended. Driving the vehicle with an ABS warning lamp illuminated can lead to overheating
167-B1415-12
Mar 28, 2014
355200 EQUIPMENT:OTHER:OWNERS/SERVICE/OTHER MANUAL
SB-14-003 The following is to inform you of the revision of the inspection procedure for the DTC?s P0340 and P0341. You are kindly requested to attach this service data to the relevant pages of the workshop manuals for maintenance and to us
167-B1003-12
Nov 24, 2010
061320 ENGINE AND ENGINE COOLING:ENGINE:OTHER FUEL TYPES:TURBO/SUPERCHARGER
SB-10-004 This document is to inform dealers and workshops of the procedures on applying an anti-seize lubricant to the VNT Turbocharger link rod for the J05D and J08E engines.
167-B1005-12
Nov 24, 2010
110000 ELECTRICAL SYSTEM
10 - 002 Starter Assembly Mounting Nuts Torque Correction. The following is to inform you of the correction made to the Workshop Manuals
167-B1005-12
Nov 24, 2010
355200 EQUIPMENT:OTHER:OWNERS/SERVICE/OTHER MANUAL
10 - 002 Starter Assembly Mounting Nuts Torque Correction. The following is to inform you of the correction made to the Workshop Manuals
167-B1001-12
Oct 27, 2010
070000 FUEL SYSTEM, GASOLINE
SB ? 10 - 003 This bulletin provides technical information for proper Fuel Filter usage as well as an example of damage caused by foreign material allowed to enter the fuel system as a result of using an improper fuel filter.
SB-09-001
Jun 15, 2009
356000 EQUIPMENT ADAPTIVE/MOBILITY
This bulletin provides diagnostic information for monitoring the engine running data to determine if the Suction Control Valve is defective, and a service procedure for replacing the Suction Control Valve when necessary. The SCV should be t
167-B0903-12
Jun 15, 2009
060000 ENGINE AND ENGINE COOLING
SB ? 09 - 001 This bulletin provides diagnostic information for monitoring the engine running data to determine if the Suction Control Valve is defective, and a service procedure for replacing the Suction Control Valve when necessary. The S
167-B0903-12
Jun 15, 2009
070000 FUEL SYSTEM, GASOLINE
SB ? 09 - 001 This bulletin provides diagnostic information for monitoring the engine running data to determine if the Suction Control Valve is defective, and a service procedure for replacing the Suction Control Valve when necessary. The S
SB-09-001
Jun 15, 2009
350000 EQUIPMENT
This bulletin provides diagnostic information for monitoring the engine running data to determine if the Suction Control Valve is defective, and a service procedure for replacing the Suction Control Valve when necessary. The SCV should be t
SB-09-001
Jun 15, 2009
070000 FUEL SYSTEM, GASOLINE
This bulletin provides diagnostic information for monitoring the engine running data to determine if the Suction Control Valve is defective, and a service procedure for replacing the Suction Control Valve when necessary. The SCV should be t
SB-09-001
Jun 15, 2009
060000 ENGINE (PWS)
This bulletin provides diagnostic information for monitoring the engine running data to determine if the Suction Control Valve is defective, and a service procedure for replacing the Suction Control Valve when necessary. The SCV should be t
SB-09-001
Jun 15, 2009
030000 BRAKES (PWS)
This bulletin provides diagnostic information for monitoring the engine running data to determine if the Suction Control Valve is defective, and a service procedure for replacing the Suction Control Valve when necessary. The SCV should be t
SB-09-001
Jun 15, 2009
070000 FUEL SYSTEM, GASOLINE
This bulletin provides diagnostic information for monitoring the engine running data to determine if the Suction Control Valve is defective, and a service procedure for replacing the Suction Control Valve when necessary. The SCV should be t
LT-0010
Jun 1, 2009
355200 EQUIPMENT:OTHER:OWNERS/SERVICE/OTHER MANUAL
Hino Quick Reference Guide 2005-2010 Model Years
167-B0803-12
Dec 5, 2008
203000 WHEELS:LUGS/NUTS/BOLTS/STUDS
SB - 08 - 005 This document is to inform dealers and workshops of the design change to the hood damper, support bolt and the addition of a support collar.
SB-08-003
Aug 27, 2008
350000 EQUIPMENT
This document is to inform dealers and work shops to the update of inlet and outlet fuel pipes on the Davco fuel filter assembly.
SB-08-003
Aug 27, 2008
356000 EQUIPMENT ADAPTIVE/MOBILITY
This document is to inform dealers and work shops to the update of inlet and outlet fuel pipes on the Davco fuel filter assembly.
167-B0805-12
Aug 27, 2008
061320 ENGINE AND ENGINE COOLING:ENGINE:OTHER FUEL TYPES:TURBO/SUPERCHARGER
08 - 003 This document is to inform dealers and work shops to the update of inlet and outlet fuel pipes on the Davco fuel filter assembly.
SB-08-003
Aug 27, 2008
090000 FUEL SYSTEM, OTHER
This document is to inform dealers and work shops to the update of inlet and outlet fuel pipes on the Davco fuel filter assembly.
167-P0805-12
Apr 12, 2008
355200 EQUIPMENT:OTHER:OWNERS/SERVICE/OTHER MANUAL
PTB 08-08 2005-2008 Quick Reference Guide Correction to Page 60
167-P0805-12
Apr 12, 2008
200000 WHEELS
PTB 08-08 2005-2008 Quick Reference Guide Correction to Page 60
167-P0802-12
Mar 10, 2008
356000 EQUIPMENT ADAPTIVE/MOBILITY
PTB 03-08 Spring Assemblies.
167-P0802-12
Mar 10, 2008
021240 SUSPENSION:FRONT:SPRINGS:LEAF SPRING ASSEMBLY
PTB 03-08 Spring Assemblies.
167-P0804-12
Mar 6, 2008
356000 EQUIPMENT ADAPTIVE/MOBILITY
PTB 02-08 Arvin Meritor Reman Carrier Assy.
167-P0803-12
Mar 5, 2008
060000 ENGINE (PWS)
PTB 01-08 Complete Engine Assembly Part Numbers
167-B0703-12
Oct 14, 2007
080000 FUEL SYSTEM, DIESEL
SB - 07 - 007 The document is to inform the dealers of the release of Hino Diagnostic eXplorer (HINO DX) Ver. 1.2.0
167-T0707-12
Oct 9, 2007
355200 EQUIPMENT:OTHER:OWNERS/SERVICE/OTHER MANUAL
07 - 008 DX REPORT ? EXPORTING, SAVING AND PRINTING FROM PAST WORK INFORMATION
167-P0702-12
Oct 4, 2007
072100 FUEL SYSTEM, GASOLINE:DELIVERY:FUEL PUMP
Revised Warranty Process ? Denso Fuel Pumps & Injector Nozzles Exchange Denso Fuel Pumps & Injector Nozzles. Effective immediately, fuel pumps and injector nozzles replaced under warranty are to be purchased from the Memphis PDC. It is no
167-T0706-12
Jun 28, 2007
355200 EQUIPMENT:OTHER:OWNERS/SERVICE/OTHER MANUAL
07 - 006 VOLTAGE DROP TEST
167-P0701-12
Jun 20, 2007
061320 ENGINE AND ENGINE COOLING:ENGINE:OTHER FUEL TYPES:TURBO/SUPERCHARGER
Introduction of Exchange Turbocharger Program. Hino Trucks is pleased to announce the introduction of the Turbocharger Exchange Program for its 2005 ? 2008 Model Year trucks. Effective June 21, 2007, the following turbocharger part numbers
167-T0705-12
Jun 20, 2007
125100 EXTERIOR LIGHTING:BRAKE LIGHTS:SWITCH
07 - 005 No Throttle Response (brake light switch)
167-T0704-12
May 25, 2007
200000 WHEELS
07 - 004 ABS Wheel Sensor (active fault 3-1 thru 3-4)
167-R0702-12
Apr 23, 2007
061120 ENGINE AND ENGINE COOLING:ENGINE:GASOLINE:TURBO/SUPERCHARGER
R0019 This Emissions Recall involves inspection of the turbocharger part number, vehicle mileage and possible turbocharger replacement.
167-R0702-12
Apr 23, 2007
063100 ENGINE AND ENGINE COOLING:EXHAUST SYSTEM:EMISSION CONTROL
R0019 This Emissions Recall involves inspection of the turbocharger part number, vehicle mileage and possible turbocharger replacement.
167-T0708-12
Feb 15, 2007
355200 EQUIPMENT:OTHER:OWNERS/SERVICE/OTHER MANUAL
06 - 012 SPEEDOMETER PULSE ADAPTER CONVERSION FORM
SB-07-003
Feb 12, 2007
350000 EQUIPMENT
This bulletin provides technical information on the redesigned axle breather that replaced the old (current) axle breather P/N A1199P1394.
167-B0706-12
Feb 12, 2007
106000 POWER TRAIN:AXLE ASSEMBLY
SB - 07 - 003 This bulletin provides technical information on the redesigned axle breather that replaced the old (current) axle breather P/N A1199P1394.
167-T0701-12
Feb 10, 2007
103700 POWER TRAIN:AUTOMATIC TRANSMISSION:TORQUE CONVERTER
07 ? 001 OUTER WHEEL BEARING NUT TORQUE REDUCTION. This Tech Tip provides information concerning the updated torque specification found in the Hino Workshop Manual regarding the Arvin Meritor front non-drive steer axles MFS-06 and MFS-08
SB-07-002
Feb 10, 2007
350000 EQUIPMENT
This bulletin provides information concerning the updated torque specification found in the Hino Workshop Manual regarding the Arvin Meritor front non-drive steer axles MFS-06 and MFS-08
SB-07-002
Feb 10, 2007
021600 SUSPENSION:FRONT:WHEEL BEARING
This bulletin provides information concerning the updated torque specification found in the Hino Workshop Manual regarding the Arvin Meritor front non-drive steer axles MFS-06 and MFS-08
SB-07-002
Feb 10, 2007
010000 STEERING
This bulletin provides information concerning the updated torque specification found in the Hino Workshop Manual regarding the Arvin Meritor front non-drive steer axles MFS-06 and MFS-08
07-001
Feb 10, 2007
350000 EQUIPMENT
This Tech Tip provides information concerning the updated torque specification found in the Hino Workshop Manual regarding the Arvin Meritor front non-drive steer axles MFS-06 and MFS-08
07-001
Feb 10, 2007
200000 WHEELS
This Tech Tip provides information concerning the updated torque specification found in the Hino Workshop Manual regarding the Arvin Meritor front non-drive steer axles MFS-06 and MFS-08
07-001
Feb 10, 2007
021600 SUSPENSION:FRONT:WHEEL BEARING
This Tech Tip provides information concerning the updated torque specification found in the Hino Workshop Manual regarding the Arvin Meritor front non-drive steer axles MFS-06 and MFS-08
167-B0705-12
Feb 10, 2007
103700 POWER TRAIN:AUTOMATIC TRANSMISSION:TORQUE CONVERTER
SB - 07 - 002 SERVICE MANUAL REVISION. OUTER WHEEL BEARING NUT TORQUE REDUCTION
167-B0801-12
Jan 12, 2007
351130 EQUIPMENT:RECREATIONAL VEHICLE/TRAILER:LPG SYSTEMS:TANK VALVE/GAUGE
SB ? 07 - 006 This bulletin provides diagnostic information for monitoring the engine running data to determine if the Suction Control Valve is defective, and a service procedure for replacing the Suction Control Valve when necessary. The S
167-P0703-12
Jan 9, 2007
061320 ENGINE AND ENGINE COOLING:ENGINE:OTHER FUEL TYPES:TURBO/SUPERCHARGER
TB-001-07 Hino uses both Davco and Racor fuel/water separators on its vehicles. To determine the correct filter you must know which one is on the vehicle. The Davco is shown on the left. The Racor is shown on the right and has a primer butt
167-P0704-12
Jan 1, 2007
356000 EQUIPMENT ADAPTIVE/MOBILITY
TB-04-07 An engineering change in connecting rods was made from a stud with nuts to fasten the cap, to a bolt only to fasten the cap. The connecting rods with the stud and nuts are no longer available. The two different styles are intercha
167-T0606-12
Dec 27, 2006
092100 FUEL SYSTEM, OTHER:DELIVERY:FUEL PUMP
06-011 HIGH PRESSURE FUEL PUMP FRONT SEAL FAILURE
06-011
Dec 27, 2006
090000 FUEL SYSTEM, OTHER
Fuel diluting engine oil
06-011
Dec 27, 2006
092100 FUEL SYSTEM, OTHER:DELIVERY:FUEL PUMP
Fuel diluting engine oil
06-011
Dec 27, 2006
350000 EQUIPMENT
Fuel diluting engine oil
167-T0605-12
Dec 27, 2006
090000 FUEL SYSTEM, OTHER
06 - 010 LOW POWER (fuel restriction)
167-T0604-12
Dec 21, 2006
034510 SERVICE BRAKES, HYDRAULIC:FOUNDATION COMPONENTS:DISC:CALIPER
06 - 009 CORRECT BRAKE CALIPERS Chassis experienced premature brake failure after a brake job was performed which included brake caliper replacement.
167-T0603-12
Dec 21, 2006
350000 EQUIPMENT
06 - 008 ABS EXTENSION HARNESS No throttle response on 2007 air brake chassis with automatic transmissions when selector placed in drive. No cruise control on 2007 air brake chassis with manual transmissions.
167-T0604-12
Dec 21, 2006
045100 SERVICE BRAKES, AIR:DISC:CALIPER
06 - 009 CORRECT BRAKE CALIPERS Chassis experienced premature brake failure after a brake job was performed which included brake caliper replacement.
167-B0602-12
Sep 18, 2006
061320 ENGINE AND ENGINE COOLING:ENGINE:OTHER FUEL TYPES:TURBO/SUPERCHARGER
SB ? 06 - 002 Fuel Filter Usage. This bulletin provides technical information for proper Fuel Filter usage as well as an example of damage caused by foreign material allowed to enter the fuel system as a result of using an improper fuel fil
167-B0601-12
Jul 10, 2006
060000 ENGINE AND ENGINE COOLING
SB ? 06 - 001 DESIGN CHANGE OF ENGINE OIL COOLER HOUSING. The casting for the engine oil cooler housing has been revised to include 2 shallow machined grooves on both sides of the engine oil cooler housing. These grooves aid in the retentio
167-T0601-12
Jan 12, 2006
090000 FUEL SYSTEM, OTHER
06-001 RUNNING OUT OF FUEL, DUAL TANKS NOT EQUALIZING
05-011
Nov 20, 2005
060000 ENGINE AND ENGINE COOLING
This document is to inform dealers and workshops of the correction to Workshop Manuals for J08 engines listed below.
167-B0501-12
Nov 20, 2005
060000 ENGINE (PWS)
05 - 011 CORRECTIONS TO WORKSHOP MANUALS FOR J08 ENGINES. The standard gap between ends of the second piston ring and the oil ring.
167-B0501-12
Nov 20, 2005
355200 EQUIPMENT:OTHER:OWNERS/SERVICE/OTHER MANUAL
05 - 011 CORRECTIONS TO WORKSHOP MANUALS FOR J08 ENGINES. The standard gap between ends of the second piston ring and the oil ring.
167-B0506-12
Nov 4, 2005
060000 ENGINE (PWS)
SB ? 05 - 008 This document is to inform the dealers about the addition of the pressure sensor cover and related part for the J08E engine.
167-B0505-12
Nov 4, 2005
356000 EQUIPMENT ADAPTIVE/MOBILITY
SB ? 05 - 007 DESIGN CHANGE OF WATER PIPE FOR J08E
167-B0503-12
Nov 4, 2005
060000 ENGINE (PWS)
SB ? 05 - 010 CORRECTION TO WORKSHOP MANUALS FOR THE J08E ENGINE. a) Resistance between terminals of the air intake pre-heater relay should be 64.0 ? 96.0 Ohms b) Illustration of the air intake pre-heater terminal should be revised. c) R
167-B0503-12
Nov 4, 2005
355200 EQUIPMENT:OTHER:OWNERS/SERVICE/OTHER MANUAL
SB ? 05 - 010 CORRECTION TO WORKSHOP MANUALS FOR THE J08E ENGINE. a) Resistance between terminals of the air intake pre-heater relay should be 64.0 ? 96.0 Ohms b) Illustration of the air intake pre-heater terminal should be revised. c) R
167-B0508-12
Sep 28, 2005
355200 EQUIPMENT:OTHER:OWNERS/SERVICE/OTHER MANUAL
SB - 05 - 005 PROPER MAINTENANCE PROCEDURES FOR GREASE LUBRICATED FRONT AXLES
167-B0508-12
Sep 28, 2005
106000 POWER TRAIN:AXLE ASSEMBLY
SB - 05 - 005 PROPER MAINTENANCE PROCEDURES FOR GREASE LUBRICATED FRONT AXLES
167-B0504-12
Sep 27, 2005
063000 ENGINE AND ENGINE COOLING:EXHAUST SYSTEM
SB - 05 - 003 This document is to inform dealers and workshops on procedures to activate exhaust brake operation.
167-R0403-12
Jun 14, 2004
356000 EQUIPMENT ADAPTIVE/MOBILITY
C0003 Hino Motors Sales U.S.A., Inc. has determined that the Tie Rod End Dust Cover Boots and Draglink Dust Cover Boots on select vehicles may experience premature deterioration that could lead to premature wear of the Tie Rod Ends or Dragl
167R040312
Jun 14, 2004
017500 STEERING:LINKAGES:TIE ROD ASSEMBLY
C0003 Hino Motors Sales U.S.A., Inc. has determined that the Tie Rod End Dust Cover Boots and Draglink Dust Cover Boots on select vehicles may experience premature deterioration that could lead to premature wear of the Tie Rod Ends or Dragl
167-R0402-12
Apr 28, 2004
200000 WHEELS
C0001 Hino Motors Sales U.S.A., Inc. has determined that the front wheel seals on select Hino vehicles may leak as a result of a Wheel Seal that was manufactured outside tolerance specifications. To remedy this situation we have decided t
167R040212
Apr 28, 2004
200000 WHEELS
C0001 Hino Motors Sales U.S.A., Inc. has determined that the front wheel seals on select Hino vehicles may leak as a result of a Wheel Seal that was manufactured outside tolerance specifications. To remedy this situation we have decided t
HINO ND8J - All Years Overview
Complete safety history for the HINO ND8J across all model years (2005, 2015).
44
Total Recalls
0
Total Complaints
0
Investigations
0
Reported Crashes
0
Reported Fires
0
Reported Deaths