2004 ACURA CL

0 recalls, 2 complaints - 8 TSBs

No recalls found for this vehicle.

Complaint Statistics

2 total complaints

Top Reported Components

Component	Complaints
AIR BAGS	1
STRUCTURE	1

Incident date: Jun 14, 2013

MY DASHBOARD STARTED CRACKING ON AROUND JUNE 14-16 2013. THE CAR STAYS IN THE GARAGE AND NOT OUT IN THE ELEMENTS. IT STARTED OUT WITH ONE CRACK AND LATER A SECOND CRACK APPEARED AND GOT PROGRESSIVELY WORSE. WE THINK IT IS THE OUTLINE OF THE AIRBAGS OR IN THAT AREA. ALSO, THERE IS ANOTHER CRACK L... Read more

Incident date: Jun 14, 2013

Technical Service Bulletins, 2004 ACURA CL

8 manufacturer communications from 7 unique bulletins. TSBs describe known problems and recommended fixes from the manufacturer.

Most Affected Components

Component	Bulletins
355100 EQUIPMENT:OTHER:LABELS	1
355200 EQUIPMENT:OTHER:OWNERS/SERVICE/OTHER MANUAL	1
117000 ELECTRICAL SYSTEM: INSTRUMENT CLUSTER/PANEL	1
199000 TIRES:PRESSURE MONITORING AND REGULATING SYSTEMS	1
140000 AIR BAGS	1
141000 AIR BAGS:FRONTAL	1
350000 EQUIPMENT	1
356000 EQUIPMENT ADAPTIVE/MOBILITY	1

356000 EQUIPMENT ADAPTIVE/MOBILITY

Test

350000 EQUIPMENT

Special Tool Loan Program: Under TOOLS AVAILABLE FOR LOAN, the list has been updated.

140000 AIR BAGS

Dealer message - On Monday, June 23, 2014, Acura announced three recalls for various 2002-06 Acura models. As of August 4, 2014, affected VINs have been identified, and VIN status inquiry has been updated.

141000 AIR BAGS:FRONTAL

Dealer message - On Monday, June 23, 2014, Acura announced three recalls for various 2002-06 Acura models. As of July 23, 2014, affected VINs have been identified, and service bulletins 14-023, Safety Recall: Front Passenger?s Airbag Infla

199000 TIRES:PRESSURE MONITORING AND REGULATING SYSTEMS

ACURA: THERE ARE GUIDELINES FOR VARIOUS SITUATIONS AND PROCEDURES INCLUDING: TIRE PRESSURE VALVE STEM INSTALLATION, TRAILER STABILITY MALFUNCTION LIGHT IS ON, ENGINE OIL APPLICATION GUIDE, NEW SOFTWARE, NEW TRANSMISSION FLUID, NOTCHY STEERI

355100 EQUIPMENT:OTHER:LABELS

LOAD CARRYING CAPACITY REDUCED LABEL FOR ALL ACURA VEHICLES. *PE

355200 EQUIPMENT:OTHER:OWNERS/SERVICE/OTHER MANUAL

ACURA: WARRANTY EXTENSION: VEHICLE WARRANTY MILEAGE. A FEDERAL COURT PROVIDED FINAL APPROVAL OF THE SETTLEMENT OF A CLASS ACTION LAWSUIT ALLEGING THAT THE ODOMETERS ON CERTAIN MODELS WERE OVERSTATING MILEAGE. VEHICLES AFFECTED BY THIS SETT

117000 ELECTRICAL SYSTEM: INSTRUMENT CLUSTER/PANEL

NHTSA Safety Investigations, ACURA CL

Investigations opened by NHTSA into potential safety defects. These are separate from recalls and may or may not result in a recall.

EA, Open , Model Year: 2003

Desiccated Air Bag Inflator Rupture

From 2000 through 2017, Takata produced millions of air bag inflators using two types of phase-stabilized ammonium nitrate ("PSAN") propellant -- propellant 2004 and propellant 2004L. After prolonged exposure to high temperature cycles and humidity, inflators using propellant 2004 can degrade, causi... ng the propellant to burn too quickly when ignited. The rapid burning can cause the inflator to rupture during deployment, potentially causing serious or even fatal injury to vehicle occupants. See 2016 Blomquist Report at www.nhtsa.gov/sites/nhtsa.gov/files/documents/expert_report-hrblomquist.pdf.Consequently, all frontal inflators using propellant 2004 that do not contain a "desiccant" (a substance that traps and holds moisture) in US vehicles are under recall. These "non-desiccated" inflators either have been or are required to be replaced.In some cases, the remedy part for these recalled inflators was, or will be, an inflator using either propellant 2004 or 2004L that does contain a desiccant. None of these "desiccated" remedy parts (which were installed in older model year vehicles) are currently under recall for a degradation concern. Certain subsets of desiccated PSAN inflators using propellant 2004 for use as original equipment, however, have been recalled for a degradation concern. All Takata inflators produced with propellant 2004L contain desiccant, and none of these desiccated inflators using propellant 2004L are under recall for a degradation concern. There have been no reported field ruptures in any non-recalled desiccated PSAN inflators.It is understood that desiccants fully saturate at some threshold, at which point any additional moisture will not be captured. This means the degradation process observed in non-desiccated inflators using propellant 2004 may also occur in non-recalled desiccated inflators using propellant 2004, assuming additional moisture enters the inflator and high temperature cycling occurs. Based on available information, desiccant saturation can occur within the first five years in the worst environments, and the time required for full saturation is affected by multiple factors. While no present safety risk has been identified, further work is needed to evaluate the future risk of non-recalled desiccated inflators using propellant 2004.Three entities -- Takata (now known as TK Global), the Independent Testing Coalition, and Exponent -- have been studying the long-term behavior of Takata desiccated PSAN inflators using propellant 2004L (as well as 2004) in the presence of moisture and temperature cycling. The research efforts, which include development of predictive modeling techniques and field sample analysis, are ongoing. To date, none of the researchers have identified field evidence showing that propellant 2004L is undergoing a degradation process that leads to aggressive deployment and potential rupture. However, the time in service of such inflators remains short compared to that of the inflators using propellant 2004. Further study is needed to assess the long-term safety of desiccated inflators using propellant 2004L.The Office of Defects Investigation is opening this investigation to examine whether a safety defect related to propellant degradation exists in non-recalled desiccated PSAN frontal inflators manufactured by Takata. This investigation will require extensive information on Takata production processes and surveys of inflators in the field. Lists of recall actions that may have used desiccated PSAN inflators as remedy parts, as well as the makes and models originally manufactured with them, is available with the downloadable version of this document (see nhtsa.gov/recalls?nhtsaId=EA21002 -- note this information is subject to change/revision as the investigation proceeds). This investigation does not supersede EA15-001, which remains open.Read more

EA, Open , Model Year: 2003

Air Bag Inflator Rupture

The Office of Defects Investigation (ODI) opened PE14-016 in June 2014 based on six inflator rupture incidents involving consumer owned vehicles produced by five vehicle manufacturers.All six vehicles were operated in Florida or Puerto Rico at the time of the rupture and for the majority of their se... rvice life, and were equipped with inflators produced by Takata, a tier-one supplier of automotive air bag systems.During the course of PE14-016, ODI determined that five additional vehicle manufacturers used inflators of a similar design and vintage also supplied by Takata. No evidence of field failures was found in vehicles produced by these five additional manufacturers.Nonetheless, at ODI's insistence, all 10 vehicle manufacturers initiated a regional recall within approximately two weeks of the opening of the investigation.The regions recalled initially included Florida, Puerto Rico, Hawaii, and the U.S. Virgin Islands, areas with high absolute humidity and climatic conditions believed to be a significant factor in the inflator ruptures.As part of the recall actions, inflators removed from remedied vehicles are to be returned to Takata for testing.Takata's initial test results on passenger inflators from remedied vehicles indicated a much higher than anticipated rupture frequency for inflators returned from Florida.Accordingly ODI requested all 10 manufacturers expand the regional recalls for passenger inflators to include other geographic areas where high absolute humidity conditions exist, including the Gulf States and other coastal areas.Takata's testing of the passenger inflators to date continues to indicate this geographic area as having the highest risk, with no ruptures occurring from inflators returned from outside the expanded recall regions.During PE14-016 four additional passenger inflator field events occurred, all in vehicles from the same expanded geographic region.Also during PE14-016 four additional driver inflator field events occurred including two in vehicles from regions not known for high absolute humidity, specifically California and North Carolina.Accordingly, ODI requested all five of the affected vehicle manufacturers currently using the subject Takata driver inflators expand to nationwide recalls.Significantly, neither of the affected vehicle manufacturers or Takata provided any explanation to account for these two driver air bag inflator ruptures outside the area of high absolute humidity.Takata testing of returned driver inflators indicates a lower rupture frequency as compared to passenger inflator testing.All test ruptures reported by Takata to date have occurred on inflators returned from high absolute humidity areas.The investigation now includes all manufacturers and vehicles known to be affected at this time.ODI's investigation will focus on, among other things, root cause analysis, other potential defect consequences, identification of affected vehicles scope, and adequacy of the remedy.The five ODI reports cited above can be reviewed online at http://www-odi.nhtsa.dot.gov/owners/SearchNHTSAID under the following identification numbers: 10537899, 10568848, 10585224, 10605877, 10651492Read more

PE, Closed , Model Year: 2003

Air Bag Inflator Rupture

The Office of Defects Investigation (ODI) opened PE14-016 in June 2014 based on six inflator rupture incidents involving consumer owned vehicles produced by five vehicle manufacturers.All six vehicles were operated in Florida or Puerto Rico at the time of the rupture and for the majority of their se... rvice life, and were equipped with inflators produced by Takata, a tier-one supplier of automotive air bag systems.During the course of PE14-016, ODI determined that five additional vehicle manufacturers used inflators of a similar design and vintage also supplied by Takata. No evidence of field failures was found in vehicles produced by these five additional manufacturers.Nonetheless, at ODI's insistence, all 10 vehicle manufacturers initiated a regional recall within approximately two weeks of the opening of the investigation.The regions recalled initially included Florida, Puerto Rico, Hawaii, and the U.S. Virgin Islands, areas with consistently high absolute humidity and climatic conditions believed to be a significant factor in the inflator ruptures.As part of the recall actions, inflators removed from remedied vehicles are to be returned to Takata for testing.Takata's initial test results on passenger inflators from remedied vehicles indicated a much higher than anticipated rupture frequency for inflators returned from Florida.Accordingly, ODI requested all 10 manufacturers expand the regional recalls for passenger inflators to include other geographic areas where high absolute humidity conditions exist, including the Gulf States and other coastal areas.Takata's testing of the passenger inflators to date continues to indicate this geographic area as having the highest risk, with no ruptures occurring from inflators returned from outside the expanded recall regions.During PE14-016, four additional passenger inflator field events occurred, all in vehicles from the same expanded geographic region.Also during PE14-016, four additional driver inflator field events occurred including two in vehicles from regions not known for high absolute humidity, specifically California and North Carolina.Accordingly, ODI requested all five of the affected vehicle manufacturers currently using the subject Takata driver inflators expand to nationwide recalls.Significantly, neither of the affected vehicle manufacturers or Takata provided any explanation to account for these two driver air bag inflator ruptures outside the area of high absolute humidity.Takata testing of returned driver inflators indicates a lower rupture frequency as compared to passenger inflator testing.All test ruptures reported by Takata to date have occurred on inflators returned from high absolute humidity areas.The PE is now closed/upgraded to an Engineering Evaluation (EA15-001) to include all manufacturersand vehicles known to be affected at this time.ODI's EA investigation will focus on, among other things, root cause analysis, other potential defect consequences, identification of affected vehicles scope, and adequacy of the remedy.The recalls related to this PE are: 14V343, 14V344, 14V348, 14V351, 14V353, 14V655, 14V700, 14V701, 14V752, 14V763, 14V770, 14V773, 14V787, 14V802 and 14V817.The number of vehicles affected are an estimate since some vehicles may have both the driver and passenger side inflators recalled. The five ODI reports cited above can be reviewed online at http://www-odi.nhtsa.dot.gov/owners/SearchNHTSAID under the following identification numbers: 10537899, 10568848, 10585224, 10605877, 10651492Read more

PE, Closed , Model Year: 2001

AUTOMATIC TRANSMISSION SUDDEN DOWNSHIFT

SEE ATTACHED REPORT.

ACURA CL - All Years Overview

Complete safety history for the ACURA CL across all model years (1997, 2003).

20 Total Recalls

731 Total Complaints

4 Investigations

45 Reported Crashes

4 Reported Fires

7 Reported Deaths

ACURA CL - Year by Year

Compare recalls and complaints across model years. Click any year to see full details.

Year	Recalls	Complaints
2004 (current)	0	2
2003	5	89	View
2002	2	71	View
2001	3	317	View
2000	0	11	View
1999	3	66	View
1998	5	69	View
1997	2	106	View

Other ACURA Models

Model	Recalls	Complaints
MDX	510	4,287	View
TLX	340	1,306	View
RDX	335	2,540	View
ILX	275	337	View
RLX	187	163	View
NSX	161	20	View
INTEGRA	132	758	View
TLX TYPE S	120	2	View

Vehicle Safety

Consumer Safety

Infrastructure

Public Health