BELL 206B

Burbank, WA — May 30, 2012

Event Information

DateMay 30, 2012
Event TypeACC
NTSB NumberWPR12CA236
Event ID20120530X22833
LocationBurbank, WA
CountryUSA
Coordinates46.20778, -118.95695
Highest InjuryNONE

Aircraft

MakeBELL
Model206B
CategoryHELI
FAR Part137
Aircraft DamageSUBS

Conditions

Light ConditionDAYL
WeatherVMC

Injuries

Fatal0
Serious0
Minor0
None1
Total Injured0

Event Location

Probable Cause

The failure of maintenance personnel to properly torque an air tube fitting, which resulted in a total loss of engine power.

Full Narrative

The pilot stated that as he was flying low over the apple orchard and rolled out of a turn, the engine began to lose power, which was accompanied by the engine out horn and light. He decreased his airspeed towards zero, and performed a hovering autorotation into the orchard. During the landing the rotor blades impacted the trees and the tail boom separated from the main fuselage. An examination of the engine revealed that Pc air tube that connects the Pc air filter to to the Power Turbine Governor (PTG) was disconnected. The b-nut that connects the tube to the Pc air filter was present on the tube but not threaded onto the Pc air filter boss. Review of the maintenance records showed that about 6 hours prior to the accident the turbine assembly and bleed valve had been replaced. The threads on both the Pc air filter and b-nut did not exhibit any damage or abnormalities. The removal and reinstallation of the Pc air tube was conducted as part of the documented maintenance. According to the engine manufacturer's technical representative, the disconnection of the Pc air tube during engine operation would result in a loss of engine power.

About This NTSB Record

This aviation event was investigated by the National Transportation Safety Board (NTSB). NTSB investigates all U.S. civil aviation accidents to determine probable cause and issue safety recommendations to prevent future accidents.

All Aviation Events More in WA