CIRRUS DESIGN CORP SR22
La Cienega, NM, April 17, 2026
Event Information
| Date | April 17, 2026 |
| Event Type | ACC |
| Location | La Cienega, NM |
| Country | USA |
| Highest Injury | NONE |
| NTSB Number | WPR26LA162 |
| Event ID | 20260421202854 |
Aircraft
| Make | CIRRUS DESIGN CORP |
| Model | SR22 |
| Registration # | N654MC |
| Aircraft Damage | SUBS |
Conditions
| Light Condition | DAYL |
| Weather | VMC |
Injuries
| Fatal | 0 |
| Serious | 0 |
| Minor | 0 |
| None | 0 |
| Total Injured | 0 |
Full Narrative
On April 17, 2026, at about 0954 mountain standard time, a Cirrus Design Corp SR22, N654MC, sustained substantial damage when it was involved in an accident near La Cienega, New Mexico. The pilot receiving instruction and the flight instructor were not injured. The airplane was operating as a Title 14 Code of Federal Regulations Part 91 instructional flight.
The pilot receiving instruction reported that during the preflight inspection, no issues were found, and the airplane was filled with approximately 90 gallons of fuel. During the takeoff and initial climb, the flight instructor noticed that the engine was not producing maximum power. He confirmed that the throttle was set to full forward and the mixture was adjusted to full rich.
At approximately 500 ft above ground level (agl), while the pilot receiving instruction initiated a left turn to follow the instrument departure procedure, when the engine lost total power. The flight instructor took control of the airplane, leveled the wings, and deployed the Cirrus Airframe Parachute System (CAPS). Subsequently, the airplane descended under the parachute canopy and landed in a residential area near several homes.
Examination of the airplane revealed that the fuselage, wings, and empennage sustained substantial damage. The wreckage was recovered to a secure location for further examination.
About This NTSB Record
This aviation event was investigated by the National Transportation Safety Board (NTSB). NTSB investigates all U.S. civil aviation accidents to determine probable cause and issue safety recommendations to prevent future accidents.