PFLUGRADT Kitfox

Clatskanie, OR — March 20, 2018

Event Information

DateMarch 20, 2018
Event TypeACC
NTSB NumberWPR18LA111
Event ID20180323X80752
LocationClatskanie, OR
CountryUSA
Coordinates46.05979, -123.27097
Highest InjuryNONE

Aircraft

MakePFLUGRADT
ModelKitfox
CategoryAIR
FAR Part091
Aircraft DamageSUBS

Conditions

Light ConditionDAYL
WeatherVMC

Injuries

Fatal0
Serious0
Minor0
None1
Total Injured0

Event Location

Probable Cause

A partial loss of engine power due to an improperly secured throttle cable set screw.

Full Narrative

On March 20, 2018, about 1315 Pacific daylight time, an experimental Pflugradt Kitfox Super Sport airplane, N925DP, experienced a partial loss of engine power and collided with terrain near Clatskanie, Oregon. The airline transport pilot was not injured and the airplane sustained substantial damage to the right wing. The airplane was registered to and operated by the pilot as a Title 14 Code of Federal Regulations Part 91 personal flight. Visual meteorological conditions prevailed, and no flight plan was filed. The flight originated from Pacific City State Airport (PFC), Pacific City, Oregon at 1200 and was destined for Pearson Field Airport (VUO), Vancouver, Washington

The pilot reported that he departed from PFC and he followed the coast and Columbia river en route to VUO. About 800 ft above the Columbia river, he advanced the throttle to climb when the engine started to lose power. The pilot elected to land on a nearby treeless island in the river. The airplane landed uneventfully, and during the landing roll, the main wheels sunk into the ground and the airplane nosed over and came to rest on its back.

Postaccident examination of the airplane by a Federal Aviation Administration Inspector revealed that the throttle cable was loose at the throttle body attachment arm. When manipulated, the cable moved freely with no corresponding motion on the throttle body arm. The cable set screw on the aft side of the throttle body arm backed slightly out of its original position and was no longer securing the throttle cable.

Review of the maintenance logbooks revealed the the throttle body arm was built by the owner and was installed on the airplane on July 30, 2017, at 1,092.5 hours, which is about 204 hours prior to the accident. In addition, a vernier style throttle cable was installed on August 30, 2017 at 1,137 hours, about 159 hours prior to the accident.

About This NTSB Record

This aviation event was investigated by the National Transportation Safety Board (NTSB). NTSB investigates all U.S. civil aviation accidents to determine probable cause and issue safety recommendations to prevent future accidents.

All Aviation Events More in OR