CESSNA 172
Factoryville, PA — July 20, 2017
Event Information
| Date | July 20, 2017 |
| Event Type | ACC |
| NTSB Number | ERA17CA250 |
| Event ID | 20170720X91341 |
| Location | Factoryville, PA |
| Country | USA |
| Coordinates | 41.58944, -75.75611 |
| Airport | Factoryville-Seamans |
| Highest Injury | NONE |
Aircraft
| Make | CESSNA |
| Model | 172 |
| Category | AIR |
| FAR Part | 091 |
| Aircraft Damage | SUBS |
Conditions
| Light Condition | DAYL |
| Weather | VMC |
Injuries
| Fatal | 0 |
| Serious | 0 |
| Minor | 0 |
| None | 2 |
| Total Injured | 0 |
Event Location
Probable Cause
The pilot's failure to attain the proper touchdown point, which resulted in a runway overrun.
Full Narrative
The private pilot reported that he had recently returned to flying after a lengthy period of inactivity, and this was his first solo flight after completing a comprehensive flight review. According to the pilot, after completing the traffic pattern, he landed the airplane at the midpoint of the 2,400-foot runway with 10 knots of excess airspeed and a slight tailwind. Despite maximum braking, the airplane overran the departure end of the runway and struck dense brush, which resulted in substantial damage to the engine firewall. The pilot further reported that there were no preimpact mechanical malfunctions or failures with the airplane that would have precluded normal operation.
About This NTSB Record
This aviation event was investigated by the National Transportation Safety Board (NTSB). NTSB investigates all U.S. civil aviation accidents to determine probable cause and issue safety recommendations to prevent future accidents.