BELLANCA 7GCBC
Ferndale, MT — June 5, 2016
Event Information
| Date | June 5, 2016 |
| Event Type | ACC |
| NTSB Number | GAA16CA284 |
| Event ID | 20160607X44444 |
| Location | Ferndale, MT |
| Country | USA |
| Coordinates | 48.06055, -114.00111 |
| Airport | FERNDALE AIRFIELD |
| Highest Injury | NONE |
Aircraft
| Make | BELLANCA |
| Model | 7GCBC |
| Category | AIR |
| FAR Part | 091 |
| Aircraft Damage | SUBS |
Conditions
| Light Condition | DAYL |
| Weather | VMC |
Injuries
| Fatal | 0 |
| Serious | 0 |
| Minor | 0 |
| None | 1 |
| Total Injured | 0 |
Event Location
Probable Cause
The pilot's loss of directional control during takeoff resulting in a decision to rotate early, and a collision with a hangar and subsequent fire.
Full Narrative
According to the pilot of the tailwheel equipped airplane, during the takeoff roll, the airplane drifted left of the centerline. He reported that he corrected the drift by applying right rudder and the airplane began to decelerate. He recalled that he released the right rudder input in order to reposition his foot off of the heel brake and noticed that the airplane was approaching a left landing strip boundary marker rapidly. He reported that he decided to rotate early and the airplane continued drifting left, collided with the roof of a hangar, and dropped to the ground where it caught on fire. The airplane was destroyed by the fire.
The pilot reported that there were no mechanical malfunctions or anomalies with any portion of the airplane prior to the takeoff roll that would have prevented normal flight operations.
The pilot's last flight review was 08AUG2009. The pilot has accumulated 165 total hours of flight time and a total of 7 hours in make and model.
About This NTSB Record
This aviation event was investigated by the National Transportation Safety Board (NTSB). NTSB investigates all U.S. civil aviation accidents to determine probable cause and issue safety recommendations to prevent future accidents.