ROBINSON HELICOPTER R44
Hayesville, NC — August 17, 2014
Event Information
| Date | August 17, 2014 |
| Event Type | ACC |
| NTSB Number | ERA14CA413 |
| Event ID | 20140829X55601 |
| Location | Hayesville, NC |
| Country | USA |
| Coordinates | 35.04087, -83.81076 |
| Highest Injury | NONE |
Aircraft
| Make | ROBINSON HELICOPTER |
| Model | R44 |
| Category | HELI |
| FAR Part | 091 |
| Aircraft Damage | SUBS |
Conditions
| Light Condition | DAYL |
| Weather | VMC |
Injuries
| Fatal | 0 |
| Serious | 0 |
| Minor | 0 |
| None | 1 |
| Total Injured | 0 |
Event Location
Probable Cause
The pilot's failure to maintain control of the helicopter, and adequate clearance, which resulted in a collision with a hangar.
Full Narrative
According to the pilot, after landing the helicopter in front of a hangar, the helicopter began to rise and tilt. He increased the collective and "over corrected" with the cyclic, which resulted in the main rotor impacting the hangar. The helicopter settled onto the concrete apron and rolled over resulting in substantial damage to the fuselage and rotor blades. The pilot reported no preimpact mechanical malfunctions or failures with the helicopter that would have precluded normal operation.
About This NTSB Record
This aviation event was investigated by the National Transportation Safety Board (NTSB). NTSB investigates all U.S. civil aviation accidents to determine probable cause and issue safety recommendations to prevent future accidents.